Arkansas DMV Permit Test study materials
Arkansas DMV Permit Test study resources

Arkansas DMV Permit Test practice questions

One question at a time. Build your Arkansas DMV Permit Test understanding.

First 50 of 199 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic Laws, Signs, Signals, and Road Markings

When you approach a steady red traffic light at an intersection, what must you do?

  1. Slow down and proceed if the road looks clear
  2. Stop only if other vehicles are present
  3. Come to a complete stop before the crosswalk or stop line Correct answer.
  4. Yield to traffic and continue without stopping

Explanation

A steady red signal requires a full stop before the stop line, crosswalk, or intersection. You may proceed only when the signal turns green or, where permitted, after stopping and yielding on a right turn. Rolling through a red light is a violation.

Question 2Traffic Laws, Signs, Signals, and Road Markings

What does a flashing yellow traffic light mean?

  1. Stop completely before proceeding
  2. Proceed with caution Correct answer.
  3. Yield only to vehicles on your right
  4. The signal is broken and the road is closed

Explanation

A flashing yellow signal warns drivers to slow down and proceed carefully while watching for hazards. It does not require a full stop the way a flashing red does. Treat it as a caution signal at the intersection.

Question 3Traffic Laws, Signs, Signals, and Road Markings

What shape and color is a standard regulatory speed limit sign?

  1. Green rectangle with white lettering
  2. Yellow diamond
  3. White rectangle with black lettering Correct answer.
  4. Red octagon

Explanation

Speed limit signs are white rectangles with black numerals and lettering. The shape and color identify them as regulatory signs that state the legal maximum speed. Warning signs, by contrast, are typically yellow diamonds.

Question 4Traffic Laws, Signs, Signals, and Road Markings

A solid yellow line on your side of the centerline means:

  1. You may pass when the road ahead is clear
  2. The lane is reserved for turning
  3. You must drive in the left lane
  4. Passing is prohibited from your direction Correct answer.

Explanation

A solid yellow centerline on your side marks a no-passing zone for traffic moving in your direction. Passing is allowed only when the line on your side is broken. The restriction exists because visibility or road conditions make passing unsafe.

Question 5Traffic Laws, Signs, Signals, and Road Markings

What must you do when a school bus with flashing red lights is stopped on a two-lane road without a median?

  1. Slow down and pass carefully
  2. Stop and remain stopped until the lights stop flashing Correct answer.
  3. Honk to warn children and continue
  4. Pass only if no children are visible

Explanation

On an undivided two-lane road, traffic in both directions must stop for a school bus displaying flashing red lights. You stay stopped until the red lights are turned off. This protects children entering or leaving the bus.

Question 6Traffic Laws, Signs, Signals, and Road Markings

A pedestrian is crossing the street in a marked crosswalk at an intersection with no traffic signal. What should you do?

  1. Yield and let the pedestrian cross Correct answer.
  2. Proceed because vehicles have the right of way
  3. Drive around behind the pedestrian
  4. Sound your horn so the pedestrian hurries

Explanation

Drivers must yield to pedestrians in a marked crosswalk, and pedestrians have the right of way once they are in it. You should stop and wait until they have crossed safely. Honking or steering around them is unsafe and unlawful.

Question 7Traffic Laws, Signs, Signals, and Road Markings

When may you make a right turn at a steady red light?

  1. Only after the light turns green
  2. Without stopping if the road is empty
  3. Never, under any circumstances
  4. After stopping, if no sign prohibits it and you yield to traffic and pedestrians Correct answer.

Explanation

A right turn on red is allowed after a complete stop unless a sign forbids it. You must yield to pedestrians and to traffic that has the green light. Some intersections post signs prohibiting the turn.

Question 8Traffic Laws, Signs, Signals, and Road Markings

What does a yellow diamond-shaped sign indicate?

  1. A route or destination guide
  2. A warning of a road condition or hazard ahead Correct answer.
  3. A regulatory requirement such as a speed limit
  4. A construction zone restriction

Explanation

Yellow diamond signs are warning signs that alert drivers to conditions ahead, such as curves, merging traffic, or pedestrian crossings. They tell you to adjust speed or be alert. Regulatory signs are usually white rectangles.

Question 9Traffic Laws, Signs, Signals, and Road Markings

A double solid yellow centerline means:

  1. Passing is prohibited in both directions Correct answer.
  2. Only trucks may pass
  3. Passing is permitted in both directions
  4. The road is one-way

Explanation

Two solid yellow lines mean neither direction may cross them to pass. The restriction applies to traffic in both directions. A broken line on your side would allow passing from your direction.

Question 10Traffic Laws, Signs, Signals, and Road Markings

You are approaching an intersection and the traffic light turns yellow. What is the safest action?

  1. Stop if you can do so safely before the intersection Correct answer.
  2. Continue at the same speed without checking
  3. Accelerate to beat the red light
  4. Reverse if you have already entered the intersection

Explanation

A yellow light warns that the signal is about to turn red. You should stop if you can do so safely; if you are too close to stop safely, proceed through with caution. Accelerating to beat the light is dangerous.

Question 11Traffic Laws, Signs, Signals, and Road Markings

What does a white painted arrow on the pavement of a lane indicate?

  1. The lane is closed ahead
  2. The direction or movement that lane is designated for Correct answer.
  3. The lane is reserved for buses only
  4. Parking is permitted in that lane

Explanation

Pavement arrows show the movement allowed from that lane, such as straight, left, or right. You should be in the correct lane before reaching the intersection. Following the arrow keeps traffic flowing safely.

Question 12Traffic Laws, Signs, Signals, and Road Markings

A flashing red traffic light should be treated the same as:

  1. A stop sign Correct answer.
  2. A yield sign
  3. A flashing yellow light
  4. A green light

Explanation

A flashing red signal requires you to come to a complete stop, yield to cross traffic, and proceed when it is safe, exactly like a stop sign. A flashing yellow, by contrast, only calls for caution.

Question 13Traffic Laws, Signs, Signals, and Road Markings

What is the purpose of a shared center left-turn lane marked by solid and broken yellow lines?

  1. To separate bicycles from cars
  2. To let traffic from either direction make left turns Correct answer.
  3. To provide a lane for emergency vehicles only
  4. To allow passing of slow vehicles

Explanation

A shared center left-turn lane is used by traffic from both directions to slow down and wait for a safe gap before turning left. You enter it only when preparing to turn. It is not a passing or travel lane.

Question 14Traffic Laws, Signs, Signals, and Road Markings

When two vehicles arrive at an uncontrolled four-way intersection at the same time, who has the right of way?

  1. The vehicle going straight
  2. The larger vehicle
  3. The vehicle on the left
  4. The vehicle on the right Correct answer.

Explanation

At an uncontrolled intersection where vehicles arrive at the same time, the driver on the left must yield to the driver on the right. If one vehicle is turning left across the other's path, the turning vehicle yields. Vehicle size does not determine right of way.

Question 15Traffic Laws, Signs, Signals, and Road Markings

A steady green arrow pointing left means:

  1. Left turns are prohibited
  2. You have a protected left turn and oncoming traffic is stopped Correct answer.
  3. You must stop before turning left
  4. You may turn left after yielding to oncoming traffic

Explanation

A green arrow gives a protected movement, meaning conflicting traffic is held by a red light. You may turn left without yielding to oncoming traffic, though you should still watch for pedestrians. A flashing yellow arrow would require yielding.

Question 16Traffic Laws, Signs, Signals, and Road Markings

What does a red circle with a diagonal slash over a black symbol on a white sign mean?

  1. The action or item shown is prohibited Correct answer.
  2. The sign marks a school zone
  3. The action is required by law
  4. The item is recommended for use

Explanation

A red circle with a diagonal slash is the universal prohibition symbol, meaning the action or item pictured is not allowed. For example, it may indicate no U-turn or no bicycles. The symbol itself defines what is banned.

Question 17Traffic Laws, Signs, Signals, and Road Markings

You are driving and a solid white line separates your lane from the lane to your right. What does this generally mean?

  1. The right lane is a shoulder you may use for passing
  2. Lane changes are discouraged; cross only when necessary and safe Correct answer.
  3. The right lane is for oncoming traffic
  4. You may change lanes freely at any time

Explanation

A solid white line marks the edge of a lane and indicates that lane changes are discouraged. You should cross it only when necessary and safe, such as to reach a turn or exit. Broken white lines separate lanes where changing is routine.

Question 18Traffic Laws, Signs, Signals, and Road Markings

What should you do when an emergency vehicle with lights and siren approaches from behind?

  1. Pull to the right edge of the road and stop until it passes Correct answer.
  2. Stop immediately in your lane
  3. Speed up to stay ahead of it
  4. Continue driving normally

Explanation

When an emergency vehicle approaches with lights and siren, pull over to the right edge of the road and stop until it passes. This clears a path for it. Stopping in the middle of your lane can block the vehicle.

Question 19Traffic Laws, Signs, Signals, and Road Markings

What does a yellow pennant-shaped sign on the left side of a two-way road indicate?

  1. A construction zone
  2. A no-passing zone ahead Correct answer.
  3. A school crossing
  4. A railroad crossing

Explanation

A yellow pennant sign marks the beginning of a no-passing zone and is placed on the left side of the road facing oncoming drivers. It warns that passing is unsafe ahead. The pennant shape is unique to this warning.

Question 20Traffic Laws, Signs, Signals, and Road Markings

A driver reaches a steady red light intending to turn left from a one-way street onto another one-way street. What is allowed in most jurisdictions?

  1. A left turn on red without stopping
  2. A left turn on red is never permitted
  3. Only a U-turn is permitted
  4. A left turn on red after a complete stop, if not prohibited and after yielding Correct answer.

Explanation

In many jurisdictions a left turn on red is allowed from a one-way street onto another one-way street after a complete stop, unless a sign prohibits it, and only after yielding to traffic and pedestrians. It is not permitted from a two-way street onto a two-way street.

Question 21Traffic Laws, Signs, Signals, and Road Markings

You are in a lane marked with a white diamond symbol. What does this indicate?

  1. The lane ends ahead
  2. The lane is for passing only
  3. The lane is closed for maintenance
  4. The lane is reserved for high-occupancy vehicles or special use Correct answer.

Explanation

A white diamond on the pavement marks a lane reserved for special use, such as high-occupancy vehicles, buses, or bicycles, depending on the signs. You may use it only if you meet the posted requirement. Signs nearby state the specific restriction.

Question 22Traffic Laws, Signs, Signals, and Road Markings

At an intersection with a flashing yellow arrow for left turns, what must you do?

  1. Stop and wait for a green arrow before turning
  2. Turn without yielding because the arrow is green
  3. Treat it as a red light and not turn
  4. Yield to oncoming traffic and pedestrians before turning left Correct answer.

Explanation

A flashing yellow arrow means you may turn left but must yield to oncoming traffic and pedestrians first. It is not a protected turn. You proceed only when a safe gap exists.

Question 23Traffic Laws, Signs, Signals, and Road Markings

Two vehicles approach an uncontrolled intersection at the same time. Vehicle A is going straight; Vehicle B is turning left across A's path. Who must yield?

  1. Vehicle A, because it is on the left
  2. Neither, because both arrived at once
  3. Vehicle B, because it is turning left Correct answer.
  4. Vehicle A, because it is going straight

Explanation

When one vehicle is turning left across the path of another, the left-turning vehicle must yield. This rule applies even if the vehicles arrived at the same time. The straight-through vehicle has the right of way.

Question 24Traffic Laws, Signs, Signals, and Road Markings

A solid white line marks the right edge of the roadway. What does crossing it generally indicate?

  1. You are entering a designated parking area
  2. You are entering a shoulder or off the travel lane Correct answer.
  3. You are entering oncoming traffic
  4. You are entering a passing zone

Explanation

The solid white edge line separates the travel lane from the shoulder. Crossing it generally means you are leaving the travel lane onto the shoulder. You should cross it only when necessary, such as for an emergency stop.

Question 25Traffic Laws, Signs, Signals, and Road Markings

A driver approaches a steady red light and wants to turn right, but a sign reads 'NO TURN ON RED.' What should the driver do?

  1. Turn right after stopping, because the sign is only a suggestion
  2. Turn right without stopping
  3. Treat the sign as a yield and proceed
  4. Wait for a green light before turning right Correct answer.

Explanation

A 'NO TURN ON RED' sign overrides the general permission to turn right on red. The driver must wait for a green signal before turning. Ignoring the sign is a traffic violation.

Question 26Traffic Laws, Signs, Signals, and Road Markings

What is the meaning of a circular sign with a yellow background and a black X?

  1. A four-way intersection is ahead
  2. A pedestrian crossing is ahead
  3. A railroad crossing is ahead Correct answer.
  4. A school zone begins here

Explanation

The round yellow sign bearing a black X is the advance warning sign for a railroad crossing. It tells drivers to slow down, look, and listen for trains before proceeding.

Question 27Traffic Laws, Signs, Signals, and Road Markings

What does an octagonal red sign always indicate?

  1. No entry for any vehicle
  2. Come to a complete stop Correct answer.
  3. Yield to cross traffic
  4. End of a construction zone

Explanation

The eight-sided red sign is reserved exclusively for STOP, and its unique shape lets drivers recognize it even when it is partly obscured. A full stop is required before entering the intersection or crosswalk.

Question 28Traffic Laws, Signs, Signals, and Road Markings

A sign with a white background and black lettering reads 'SPEED LIMIT 55.' What does this sign represent?

  1. The speed limit only for trucks
  2. The minimum speed allowed on the road
  3. The maximum lawful speed in good conditions Correct answer.
  4. A suggested speed for curves and ramps

Explanation

White rectangular signs with black legends are regulatory, and a posted speed limit is the maximum legal speed under favorable conditions. Driving faster than the posted number is unlawful even if the road seems clear.

Question 29Traffic Laws, Signs, Signals, and Road Markings

What must you do at a steady red arrow pointing in the direction you want to travel?

  1. Stop and remain stopped until a green signal appears Correct answer.
  2. Slow down and proceed if the way is clear
  3. Yield and then turn when traffic clears
  4. Treat it as a flashing signal and continue

Explanation

A steady red arrow is a stop signal for traffic moving in the direction the arrow points. You may not proceed in that direction until a green arrow or green light is displayed.

Question 30Traffic Laws, Signs, Signals, and Road Markings

What does a broken yellow centerline on a two-lane road mean?

  1. The road has one-way traffic
  2. Passing is permitted when it is safe Correct answer.
  3. Passing is prohibited in both directions
  4. A turn lane begins in the center

Explanation

A single broken yellow line separates traffic moving in opposite directions and permits either side to pass when visibility and traffic conditions make it safe. Passing still requires adequate clear distance ahead.

Question 31Traffic Laws, Signs, Signals, and Road Markings

What is the meaning of a yellow diamond-shaped sign showing a curving arrow?

  1. A passing lane opens ahead
  2. The road ends and a detour begins
  3. A curve lies ahead and speed should be reduced Correct answer.
  4. The lane must turn in the arrow's direction

Explanation

Yellow diamond signs are warnings about conditions ahead, and a curving arrow warns of a bend in the road. Drivers should slow to a safe speed before reaching the curve.

Question 32Traffic Laws, Signs, Signals, and Road Markings

What does a pentagon-shaped sign with a yellow background indicate?

  1. A railroad crossing ahead
  2. A school zone or school crossing ahead Correct answer.
  3. A hospital zone ahead
  4. A work zone ahead

Explanation

The five-sided sign is used only for school areas, warning drivers that children may be present. Drivers must slow down and watch for students and crossing guards.

Question 33Traffic Laws, Signs, Signals, and Road Markings

When a traffic light is dark or not functioning at an intersection, how should you proceed?

  1. Treat the intersection as a four-way stop Correct answer.
  2. Proceed without slowing since no signal controls you
  3. Yield only to vehicles on your right
  4. Wait for a police officer before moving at all

Explanation

A signal that is dark or malfunctioning is treated as an all-way stop, so each driver stops and takes turns proceeding. Normal right-of-way rules then determine who goes first.

Question 34Traffic Laws, Signs, Signals, and Road Markings

What does a sign with a red circle and slash over a left-turn arrow mean?

  1. A left-turn lane begins ahead
  2. Left turns must be made from the right lane
  3. Left turns are prohibited Correct answer.
  4. Left turns are permitted only on green

Explanation

A red circle with a diagonal slash is the universal prohibition symbol, so the sign means the maneuver pictured is not allowed. Here, no driver may turn left at that location.

Question 35Traffic Laws, Signs, Signals, and Road Markings

You are driving in the left lane of a multi-lane highway and a faster vehicle approaches from behind. What is the proper action?

  1. Maintain your speed and stay in the left lane
  2. Move to the right lane when it is safe to do so Correct answer.
  3. Brake to encourage the other driver to pass
  4. Speed up so the other driver cannot pass

Explanation

On multi-lane roads, slower traffic should keep right, and a driver holding up faster traffic should move over when it is safe. Braking or accelerating to block a passing vehicle creates unnecessary hazard.

Question 36Traffic Laws, Signs, Signals, and Road Markings

What does a white rectangular sign with black lettering reading 'ONE WAY' with an arrow tell a driver?

  1. The street is closed to through traffic
  2. Traffic on that street moves in two directions
  3. The arrow points to a one-lane bridge
  4. Traffic on that street moves only in the arrow's direction Correct answer.

Explanation

The ONE WAY sign indicates that all traffic on that roadway flows in the direction the arrow points. Drivers must not enter against the arrow.

Question 37Traffic Laws, Signs, Signals, and Road Markings

Where a road has a solid yellow line on your side of the centerline and a broken yellow line on the other side, what does this mean?

  1. Passing is prohibited for both directions
  2. Passing is permitted for you but prohibited for oncoming traffic
  3. Passing is permitted for both directions
  4. Passing is prohibited for you but permitted for oncoming traffic Correct answer.

Explanation

Each side of a centerline controls the traffic on that side, so a solid yellow line on your side bars you from passing. The broken line on the other side allows oncoming traffic to pass when safe.

Question 38Traffic Laws, Signs, Signals, and Road Markings

What does a white dashed line between two lanes of traffic moving in the same direction indicate?

  1. Lane changes are permitted when safe Correct answer.
  2. The lanes merge into one ahead
  3. Lane changes are prohibited
  4. The right lane is an exit-only lane

Explanation

Broken white lines separate lanes of same-direction traffic and may be crossed to change lanes when it is safe. Drivers should still signal and check mirrors and blind spots first.

Question 39Traffic Laws, Signs, Signals, and Road Markings

A traffic officer is directing traffic at an intersection while the signal shows green for your direction, but the officer signals you to stop. What should you do?

  1. Obey the officer and stop Correct answer.
  2. Proceed slowly while watching the officer
  3. Sound your horn to ask the officer to clarify
  4. Proceed because the light is green

Explanation

Directions given by a police officer or authorized flagger override traffic signals and signs. When an officer signals you to stop, you must stop regardless of the light color.

Question 40Traffic Laws, Signs, Signals, and Road Markings

What does a black-and-white sign reading 'YIELD' require a driver to do?

  1. Stop only if another vehicle is already in the intersection
  2. Merge without slowing if no sign of conflict exists
  3. Slow down and give the right of way to traffic and pedestrians Correct answer.
  4. Come to a complete stop in every case

Explanation

A yield sign requires a driver to slow and let cross traffic and pedestrians go first, proceeding only when the way is clear. A full stop is required only when necessary to yield safely.

Question 41Traffic Laws, Signs, Signals, and Road Markings

What is indicated by a yellow sign showing a pedestrian figure walking within a crosswalk?

  1. A pedestrian-only path begins
  2. Sidewalks end at this point
  3. Jogging is prohibited in the area
  4. A pedestrian crossing is ahead Correct answer.

Explanation

Yellow warning signs with a walking figure alert drivers that a crosswalk or pedestrian crossing is ahead. Drivers should reduce speed and be ready to stop for people on foot.

Question 42Traffic Laws, Signs, Signals, and Road Markings

You are approaching a stopped school bus with its red lights flashing on an undivided two-lane road. What must you do?

  1. Pass only if no children are visible
  2. Sound your horn and continue at the speed limit
  3. Slow down and pass with caution
  4. Stop until the red lights stop flashing Correct answer.

Explanation

On an undivided road, traffic in both directions must stop for a school bus displaying flashing red lights and an extended stop arm. You may proceed only after the lights stop flashing.

Question 43Traffic Laws, Signs, Signals, and Road Markings

What does a sign with a white background showing a black curved arrow and the word 'ONLY' beneath it mean for your lane?

  1. All traffic in the lane must turn in the arrow's direction Correct answer.
  2. The lane will end shortly ahead
  3. The lane is reserved for buses
  4. Traffic in the lane may turn or continue straight

Explanation

A regulatory sign with a turn arrow and the word ONLY designates a mandatory movement for that lane. Drivers who do not intend to make the turn should change lanes before the intersection.

Question 44Traffic Laws, Signs, Signals, and Road Markings

What does a white line painted across your lane at an intersection, paired with a stop sign, indicate?

  1. The start of a passing zone
  2. The boundary of a bike lane
  3. The point where your vehicle must stop Correct answer.
  4. The point where parking becomes legal

Explanation

A solid white stop line shows exactly where a vehicle must halt at a stop sign or signal. The front of the vehicle should be behind the line so crosswalks and intersections stay clear.

Question 45Traffic Laws, Signs, Signals, and Road Markings

You are driving 45 mph on a two-lane road when you see a solid yellow line on your side of the centerline. A slow truck ahead is traveling 20 mph. What is the correct course of action?

  1. Follow closely and flash your headlights until the truck pulls over
  2. Pass using the shoulder of the road
  3. Stay behind the truck until the marking permits passing Correct answer.
  4. Cross the solid line to pass because the truck is slow

Explanation

A solid yellow line on your side prohibits passing regardless of how slow the vehicle ahead is moving. The driver must wait for a broken line or another lawful passing opportunity.

Question 46Traffic Laws, Signs, Signals, and Road Markings

A driver on a one-way street wants to turn left at a red light onto another one-way street where turns are not prohibited. What does the law allow?

  1. A left turn only after yielding to traffic behind
  2. No turn until the light turns green
  3. A left turn without stopping if no traffic is present
  4. A left turn after stopping, if the way is clear Correct answer.

Explanation

Many states allow a left turn on red from a one-way street onto another one-way street, but only after a complete stop and only when no sign prohibits it and the way is clear. The turn is a permission, not a right, so yielding is required.

Question 47Traffic Laws, Signs, Signals, and Road Markings

A traffic signal shows a green circle while a pedestrian who entered the crosswalk on the walk signal is still crossing your path as you turn right. What must you do?

  1. Sound your horn so the pedestrian hurries
  2. Turn behind the pedestrian without stopping
  3. Proceed because the green light gives you priority
  4. Wait for the pedestrian to clear your path before turning Correct answer.

Explanation

A green light allows movement but does not override a pedestrian's right of way in a crosswalk. A turning driver must yield to pedestrians lawfully in the crosswalk and wait until the path is clear.

Question 48Traffic Laws, Signs, Signals, and Road Markings

Two lanes of traffic merge into one, and a sign shows a yellow diamond with a left lane ending symbol. You are in the right lane. What is the safest response?

  1. Brake sharply at the merge point
  2. Maintain your lane and speed and let merging traffic adjust Correct answer.
  3. Speed up to close the gap ahead of merging vehicles
  4. Move into the left lane to make room

Explanation

When your lane continues and the adjacent lane ends, the driver whose lane ends must merge safely. Holding a steady speed and position gives merging drivers a predictable gap to enter.

Question 49Traffic Laws, Signs, Signals, and Road Markings

A flashing yellow light is displayed at an intersection where you have the right of way over cross traffic controlled by flashing red. What does the flashing yellow require of you?

  1. Yield to all cross traffic before proceeding
  2. Slow down and proceed with caution Correct answer.
  3. Treat it as a green light and maintain speed
  4. Stop completely before entering

Explanation

A flashing yellow signal warns drivers to slow down and proceed carefully while watching for conflicting traffic. It does not require a stop, but it does not guarantee the way is clear.

Question 50Traffic Laws, Signs, Signals, and Road Markings

A steady red arrow is displayed for the lane you are in. What does this signal require you to do?

  1. Stop only if a vehicle is approaching from the cross direction
  2. Stop, then turn after yielding to oncoming traffic
  3. Come to a complete stop and remain stopped until a green arrow or other lawful signal appears Correct answer.
  4. Slow down and proceed if the lane ahead appears clear of cross traffic

Explanation

A steady red arrow applies to the specific movement it controls, so drivers in that lane must stop and stay stopped. The movement may resume only when a green arrow or another signal that lawfully permits it is shown. General red-light rules for the arrow movement do not allow a rolling or yield-only turn.