I85PREP
⌘ K
QLD Motorcycle Knowledge Test study materials
QLD Motorcycle Knowledge Test study resources

QLD Motorcycle Knowledge Test practice questions

One question at a time. Build your QLD Motorcycle Knowledge Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road rules and safe riding

When riding on a Queensland road with a speed limit of 100 km/h, what is the minimum safe following distance in good conditions based on the two-second rule?

  1. At least five seconds behind the vehicle ahead
  2. At least two seconds behind the vehicle ahead Correct answer.
  3. At least one second behind the vehicle ahead
  4. At least half a second behind the vehicle ahead

Explanation

The two-second rule gives you time to react and stop if the vehicle ahead brakes suddenly. At higher speeds the gap in metres grows even though the time stays two seconds. In poor conditions such as rain or darkness you should increase the gap further.

Question 2Road rules and safe riding

You are approaching a roundabout and intend to turn right. How should you signal?

  1. Do not signal at all inside a roundabout
  2. Signal right on approach and continue until you exit Correct answer.
  3. Signal right only after entering the roundabout
  4. Signal left on approach and continue until you exit

Explanation

When turning right at a roundabout you signal right on approach to show your intended direction and keep the signal on until you leave. This tells other drivers you are continuing around rather than exiting early. You should cancel the signal as you exit.

Question 3Road rules and safe riding

What is the maximum blood alcohol concentration permitted for a learner or provisional motorcycle rider in Queensland?

  1. 0.05
  2. Zero Correct answer.
  3. 0.02
  4. 0.08

Explanation

Learner and provisional licence holders must have a zero blood alcohol concentration while riding. Any alcohol in the system is an offence for these riders. This applies regardless of how little has been consumed.

Question 4Road rules and safe riding

When should you use your motorcycle's horn?

  1. To warn other road users of your presence when necessary Correct answer.
  2. To encourage slower traffic to move aside
  3. To greet friends you pass on the road
  4. To express frustration at another driver's behaviour

Explanation

A horn is a warning device used to alert others to your presence when there is a risk of collision. Using it for any other reason can startle or confuse other road users. It should not be used as a way to vent frustration or demand space.

Question 5Road rules and safe riding

What does a flashing yellow traffic light at an intersection mean?

  1. Proceed with caution and give way as required Correct answer.
  2. Speed up to clear the intersection
  3. The lights are broken and normal give-way rules do not apply
  4. Stop and wait for a green light

Explanation

A flashing yellow light warns that the signals are operating in a caution mode, often outside peak times. You may proceed but must obey normal give-way rules and check carefully. It does not mean stop unless a stop sign or line also applies.

Question 6Road rules and safe riding

When riding at night, which of the following keeps you most visible to other road users?

  1. Wearing a black leather jacket with no reflective material
  2. Riding with your high beam on at all times
  3. Wearing a light-coloured jacket with reflective strips Correct answer.
  4. Turning off your headlight in well-lit streets

Explanation

Light-coloured clothing with reflective strips makes you stand out to drivers, especially in low light. Reflective material catches headlights and increases your chance of being seen. High beam should be dipped when it could dazzle others, and your headlight must stay on.

Question 7Road rules and safe riding

You are riding and see a pedestrian waiting at a marked zebra crossing. What must you do?

  1. Continue at the same speed because you have right of way
  2. Move to the centre line and pass the crossing quickly
  3. Sound your horn to warn them to wait
  4. Slow down and give way to the pedestrian Correct answer.

Explanation

Drivers and riders must give way to pedestrians at marked crossings. You should slow down and be ready to stop as you approach. Failing to give way puts pedestrians at serious risk.

Question 8Road rules and safe riding

What is the legal requirement for wearing a helmet when riding a motorcycle in Queensland?

  1. A helmet is optional for experienced riders
  2. An approved helmet must be worn and securely fastened at all times while riding Correct answer.
  3. A helmet is only required on roads with a speed limit over 60 km/h
  4. A helmet is required only on highways and freeways

Explanation

Queensland law requires all riders and pillion passengers to wear an approved helmet that is properly fastened. This applies on all roads and in all conditions. The helmet must meet the approved standard to be legal.

Question 9Road rules and safe riding

You are riding in heavy rain and visibility is reduced. What is the safest adjustment to make?

  1. Reduce your speed and increase your following distance Correct answer.
  2. Maintain your normal speed to stay with traffic
  3. Turn on your high beam to see further ahead
  4. Ride closer to the vehicle ahead to use its spray as a guide

Explanation

Wet roads reduce grip and increase stopping distances, so slowing down and leaving a larger gap is essential. Rain also reduces visibility for you and for drivers around you. High beam in rain can reflect off the droplets and worsen visibility.

Question 10Road rules and safe riding

When are you permitted to cross a continuous double centre line on a Queensland road?

  1. To enter or leave a property or to pass a cyclist when it is safe Correct answer.
  2. Only when travelling above 80 km/h
  3. Never, under any circumstances
  4. Whenever the road ahead appears clear

Explanation

You may cross a continuous double centre line in limited situations such as turning into or out of a property, or when safely passing a cyclist. Otherwise you must not cross it. The line exists to protect against dangerous overtaking.

Question 11Road rules and safe riding

You are riding behind a large truck that is about to turn left. Why should you avoid passing on the left?

  1. The truck will accelerate faster than your motorcycle
  2. The truck may swing wide and its driver may not see you in the blind spot Correct answer.
  3. Passing on the left is only illegal at night
  4. Trucks always have the right of way when turning

Explanation

Large vehicles often swing out before turning and have significant blind spots along their sides. A rider in that space risks being crushed if the truck turns across them. Staying back and passing only when clearly safe is the correct approach.

Question 12Road rules and safe riding

What should you do if your motorcycle's front tyre suddenly loses pressure while you are riding?

  1. Accelerate to stabilise the bike
  2. Apply the front brake hard immediately
  3. Ease off the throttle, hold the bars firmly and slow down gradually to a safe stop Correct answer.
  4. Lean sharply to the side to counter the pull

Explanation

A deflating front tyre makes steering heavy and unpredictable, so you should reduce speed smoothly while keeping a firm grip. Hard braking or sudden movements can cause a loss of control. Pull over safely once you have slowed.

Question 13Road rules and safe riding

When riding over a railway level crossing with no boom gates or flashing lights, what should you do?

  1. Speed up to cross as quickly as possible without looking
  2. Sound your horn continuously while crossing
  3. Stop on the tracks to check for trains
  4. Slow down, look both ways and cross only when clear Correct answer.

Explanation

At an uncontrolled crossing you must approach with caution, look and listen for trains, and proceed only when the way is clear. Stopping on the tracks is extremely dangerous. Trains cannot stop quickly, so your own observation is critical.

Question 14Road rules and safe riding

You are riding at night and an oncoming vehicle's headlights are dazzling you. What is the safest response?

  1. Speed up to get past the vehicle quickly
  2. Stare directly at the headlights to judge the distance
  3. Turn on your high beam to retaliate
  4. Slow down and look toward the left edge of your lane until it passes Correct answer.

Explanation

Looking toward the left edge of your lane helps you maintain position without being blinded. Reducing speed gives you more time to react while your vision recovers. Retaliating with high beam increases the danger for both riders.

Question 15Road rules and safe riding

What is the correct way to negotiate a curve on a motorcycle?

  1. Accelerate hard as you enter the curve
  2. Coast with the clutch pulled in through the whole curve
  3. Brake firmly while leaned over in the middle of the curve
  4. Slow down before the curve and maintain a steady throttle through it Correct answer.

Explanation

Most of your speed adjustment should be done before entering the curve, then a steady throttle helps the bike stay stable. Braking hard while leaned over reduces grip and can cause a slide. Coasting with the clutch in removes engine control and stability.

Question 16Road rules and safe riding

When are you allowed to use a mobile phone while riding a motorcycle?

  1. While stopped at a red light with the engine running
  2. While riding slowly in heavy traffic
  3. While using one hand to hold the phone to your ear
  4. Only when parked safely and the engine is off or you are legally parked Correct answer.

Explanation

A phone may only be used when you are safely parked and not required to be in control of the moving vehicle. Using a handheld phone while riding or stopped in traffic is illegal. Touching a phone while riding takes your attention and a hand away from the controls.

Question 17Road rules and safe riding

You are riding and a vehicle ahead flashes its brake lights repeatedly. What does this most likely indicate and how should you respond?

  1. The driver wants you to turn on your high beam
  2. The driver is braking hard or warning of a hazard, so ease off and increase your gap Correct answer.
  3. The driver is indicating the road ahead is clear
  4. The driver is inviting you to overtake immediately

Explanation

Repeated brake lights usually signal hard braking or a hazard ahead that the driver wants to warn others about. The safe response is to reduce speed and create more space. Overtaking in response would be dangerous.

Question 18Road rules and safe riding

What does a white diamond symbol painted on the road surface indicate?

  1. A no-overtaking zone
  2. A pedestrian crossing ahead
  3. A speed hump
  4. A marked lane for special vehicles such as buses or bicycles Correct answer.

Explanation

White diamond symbols commonly mark lanes set aside for particular vehicle types, such as bus or bicycle lanes. They help road users identify where those vehicles are expected. They do not indicate crossings, overtaking rules or speed humps.

Question 19Road rules and safe riding

You are following a motorcycle and want to overtake on a two-lane road. What should you check before moving out?

  1. Your mirrors, blind spot and that there is enough clear road to complete the pass Correct answer.
  2. That the vehicle behind you is signalling
  3. That your horn works
  4. Only that the motorcycle ahead is travelling slowly

Explanation

Before overtaking you must check mirrors and the blind spot and confirm there is enough clear road to complete the manoeuvre safely. Judging only the speed of the vehicle ahead ignores oncoming and following traffic. A safe overtake needs a clear gap and good visibility.

Question 20Road rules and safe riding

When riding, where should you position yourself in your lane on a multi-lane road to reduce risk?

  1. In a position that keeps you visible and gives an escape path Correct answer.
  2. Directly behind a large vehicle to shelter from wind
  3. Always directly beside another vehicle
  4. As close to the centre line as possible at all times

Explanation

Lane position should maximise your visibility to others and leave you room to avoid hazards. This often means avoiding blind spots and staying out of other vehicles' paths. A fixed position is not always best; it depends on traffic and conditions.

Question 21Road rules and safe riding

What is the effect of riding with your foot resting on the rear brake pedal?

  1. It increases fuel efficiency
  2. It can overheat the brake and reduce braking performance Correct answer.
  3. It has no effect on the motorcycle
  4. It improves stability at low speed

Explanation

Resting a foot on the brake pedal applies light continuous braking that can overheat the brake and wear it prematurely. It may also confuse following drivers if the brake light stays on. Keeping your foot off the pedal until needed preserves braking performance.

Question 22Road rules and safe riding

You are riding and approach a stopped school bus with its warning lights flashing. What must you do?

  1. Sound your horn and continue at the same speed
  2. Stop only if a child is already on the road
  3. Slow down and give way to children crossing near the bus Correct answer.
  4. Overtake the bus quickly before children step out

Explanation

Flashing lights on a school bus warn that children are getting on or off and may cross the road. You must slow down and be ready to stop for them. Overtaking or continuing at speed risks hitting a child who steps out unexpectedly.

Question 23Road rules and safe riding

What is the safest way to carry a load on a motorcycle?

  1. Secure it firmly and keep it balanced within the bike's limits Correct answer.
  2. Hold it in one hand while riding
  3. Let it hang over the side to keep the centre of gravity low
  4. Balance it on the fuel tank unsecured

Explanation

Loads must be securely fastened and balanced so they do not shift and upset the bike's handling. Carrying items in one hand or unsecured removes control and creates a hazard. Overhanging loads can catch on objects or other vehicles.

Question 24Road rules and safe riding

You are riding and the rear wheel starts to skid under hard braking. What is the best immediate action?

  1. Apply more rear brake to stop the skid
  2. Lean the bike hard to the side
  3. Ease off the rear brake to let the wheel regain grip Correct answer.
  4. Release the front brake only

Explanation

If the rear wheel locks and skids, easing off the rear brake allows the wheel to rotate and regain grip. Keeping it locked or braking harder prolongs the skid. Leaning sharply during a skid can cause a fall.

Question 25Road rules and safe riding

When riding in a group, what spacing and formation helps keep the group safe?

  1. Riding in a single file with no gaps between bikes
  2. A staggered formation with adequate gaps to allow room to react Correct answer.
  3. Following the rider ahead as closely as possible
  4. Riding side by side in a tight block

Explanation

A staggered formation with generous gaps gives each rider room to see, be seen and react to hazards. Tight blocks or no gaps leave no escape space if someone brakes suddenly. Spacing out also lets other traffic pass safely.

Question 26Road rules and safe riding

What must you do before changing lanes on a multi-lane road?

  1. Speed up sharply so you complete the move quickly
  2. Check your mirrors and blind spot, then signal before moving Correct answer.
  3. Rely on your mirrors alone and move when the lane looks clear
  4. Sound your horn to warn nearby traffic, then change lanes

Explanation

A lane change requires you to check mirrors and turn your head to cover the blind spot, then signal your intention before moving across. Mirrors alone leave blind spots that can hide a vehicle. Signalling lets other road users anticipate your movement.

Question 27Road rules and safe riding

What is the default speed limit on a road in a built-up area in Queensland when no sign shows a different limit?

  1. 60 km/h
  2. 40 km/h
  3. 80 km/h
  4. 50 km/h Correct answer.

Explanation

Where no speed limit sign is displayed in a built-up area, the default limit is 50 km/h. Signed limits override the default. You must always ride at a speed that is safe for the conditions, even below the limit.

Question 28Road rules and safe riding

At an intersection with a stop sign, what must you do?

  1. Slow down and proceed if the way looks clear
  2. Stop only when a red light is also showing
  3. Come to a complete stop and give way before proceeding Correct answer.
  4. Stop only if another vehicle is approaching

Explanation

A stop sign requires a complete stop at the stop line or, if none, at the edge of the intersection. After stopping you must give way to traffic before moving off. A rolling check does not satisfy the requirement.

Question 29Road rules and safe riding

What does a broken (dashed) white lane line mean?

  1. You may cross it to change lanes when it is safe Correct answer.
  2. It marks the edge of a bicycle lane only
  3. You must not cross it at any time
  4. It marks a lane reserved for buses

Explanation

A broken white line separates lanes travelling in the same direction and may be crossed when it is safe to change lanes. A continuous line restricts crossing. Lane markings work together with observation and signalling.

Question 30Road rules and safe riding

When must you use your indicator on a roundabout?

  1. Never, because roundabout direction is obvious
  2. When entering, and again when leaving Correct answer.
  3. Only when another vehicle is nearby
  4. Only when you are leaving the roundabout

Explanation

You should signal left before exiting a roundabout, and signal as required when entering depending on your intended exit. Indicating your exit warns following and nearby drivers of your movement. Consistent signalling helps traffic flow.

Question 31Road rules and safe riding

What is the minimum safe following distance in good conditions for a motorcycle?

  1. Exactly one car length at any speed
  2. At least a two-second gap behind the vehicle ahead Correct answer.
  3. No gap is needed if you can see the driver's mirrors
  4. Half a second, because motorcycles stop faster

Explanation

A minimum two-second gap in good conditions gives you time to react and stop. The gap should increase in poor weather, at night, or when following large vehicles. Following distance should be measured in time, not fixed lengths.

Question 32Road rules and safe riding

What should you do when you see a red traffic light at an intersection?

  1. Slow down and continue through
  2. Treat it as a give-way sign
  3. Proceed carefully if no traffic is crossing
  4. Stop at the stop line and wait for green Correct answer.

Explanation

A red light requires you to stop at the stop line and remain stopped until the signal turns green. You may only proceed on green when it is safe. Red-light running is dangerous and illegal.

Question 33Road rules and safe riding

What does a solid white line along the left edge of the road generally indicate?

  1. A lane reserved for oncoming traffic
  2. A lane you may use for overtaking
  3. A parking area for motorcycles
  4. The edge of the roadway or a shoulder boundary Correct answer.

Explanation

Edge lines mark the boundary of the roadway or travel lane, helping riders stay within the sealed surface. They are not an invitation to travel on the shoulder. Staying inside the edge line keeps you clear of hazards and soft surfaces.

Question 34Road rules and safe riding

You are approaching a give-way sign at a T-intersection and want to turn right. What is the correct action?

  1. Slow or stop as needed and give way to traffic on the continuing road Correct answer.
  2. Sound your horn and proceed first
  3. Maintain your speed and turn if the road looks clear
  4. Only give way to vehicles approaching from your right

Explanation

At a give-way sign you must slow or stop as necessary and give way to vehicles on the road you are entering or crossing. At a T-intersection the continuing road generally has priority. Give-way obligations apply to traffic from both directions where relevant.

Question 35Road rules and safe riding

You are riding in the left lane of a multi-lane road and want to turn right at the next intersection. What should you do?

  1. Turn right from the left lane after signalling
  2. Stop in the left lane and wait for a gap in all traffic
  3. Cross the lanes sharply just before the turn
  4. Move into the right lane in good time, signalling and checking blind spots Correct answer.

Explanation

You should change into the correct lane well before the intersection, using mirrors, a head check and signals. Turning from the wrong lane is unsafe and unlawful. Early positioning gives other drivers time to react.

Question 36Road rules and safe riding

You are riding on a wet road and need to slow for a corner. What is the safest technique?

  1. Close the throttle abruptly and coast through
  2. Reduce speed smoothly before the corner and use gentle, progressive controls Correct answer.
  3. Brake hard while leaning into the corner
  4. Pull the front brake firmly mid-corner

Explanation

On wet roads, traction is reduced, so speed should be reduced smoothly before entering the corner. Braking and steering forces should be kept gentle and progressive. Abrupt inputs can cause a loss of grip.

Question 37Road rules and safe riding

What is the safest response when a vehicle behind is tailgating you?

  1. Wave the driver past and slow down suddenly
  2. Accelerate well above the limit to create distance
  3. Maintain a steady speed and increase your own following gap ahead Correct answer.
  4. Brake sharply to warn the driver off

Explanation

Keeping a steady speed and increasing the gap ahead gives you more room to slow gradually, reducing the chance of the tailgater hitting you. Avoid sudden braking or provocative gestures. If possible, let the driver pass when it is safe.

Question 38Road rules and safe riding

You are riding near a parked car and see its driver's door beginning to open. What should you do?

  1. Continue at the same speed and position
  2. Move away from the door line and be ready to slow Correct answer.
  3. Accelerate to pass before the door is fully open
  4. Sound your horn and hold your line

Explanation

Doors opening into traffic are a common hazard for riders, so it is safer to create space and be prepared to slow. Adjusting your position away from parked cars reduces the risk. Anticipating the hazard gives you time to react.

Question 39Road rules and safe riding

What is the correct way to handle a motorcycle through a roundabout when going straight ahead?

  1. Stay in the left lane and accelerate hard through the circle
  2. Enter without giving way if you are already moving
  3. Give way to traffic already on the roundabout and signal left before your exit Correct answer.
  4. Stop inside the roundabout to check your exit

Explanation

You must give way to vehicles already circulating on the roundabout, then signal left before leaving at your exit. Choosing the correct lane and speed keeps the flow predictable. Stopping inside a roundabout is unsafe.

Question 40Road rules and safe riding

You are riding at night on an unlit road and see a hazard ahead. What is the main reason to reduce your speed?

  1. Your headlight beam shows less distance than your stopping distance may require Correct answer.
  2. Your tyres grip better at lower speed in the dark
  3. The engine runs more efficiently at lower speed
  4. Other drivers are more likely to see you at higher speed

Explanation

At night your headlight only illuminates a limited distance ahead, so you must be able to stop within the distance you can see. Reducing speed brings your stopping distance within the lit area. This is why night riding requires a lower speed on unlit roads.

Question 41Road rules and safe riding

What should you do if you must stop on the roadside at night?

  1. Stop in a position visible to traffic and keep your lights or hazard lights on Correct answer.
  2. Park facing oncoming traffic without lights
  3. Stop just over the crest of a hill
  4. Leave your lights off to save the battery

Explanation

When stopped at night, position the motorcycle where it can be seen and use lights or hazard lights to warn approaching traffic. Avoid stopping where visibility is limited, such as just over a crest. Being seen is critical to avoid being struck.

Question 42Road rules and safe riding

You are riding and the traffic light ahead turns amber as you approach. What should you do?

  1. Stop if it is safe to do so, otherwise proceed with caution Correct answer.
  2. Accelerate to get through before it turns red
  3. Always continue through at the same speed
  4. Reverse away from the intersection

Explanation

An amber light means stop if you can do so safely. If you are too close to stop safely, proceed through with caution. Accelerating to beat the red light is dangerous.

Question 43Road rules and safe riding

When may you ride in a bus lane during its operating hours?

  1. Only if signs permit motorcycles or outside the lane's operating times Correct answer.
  2. At any time, because motorcycles are small
  3. Only when carrying a pillion passenger
  4. Whenever traffic is heavy

Explanation

Bus lanes are restricted during their signed operating times, and motorcycles may only use them where signs specifically allow it or when the lane is not in operation. You must follow the signs for each lane. Using a restricted lane unlawfully can attract a fine.

Question 44Road rules and safe riding

You are riding past a row of parked cars on a narrow street. Which lane position is generally safest?

  1. Close to the parked cars to leave room for oncoming traffic
  2. Directly on the centre line
  3. Towards the centre of your lane, away from the doors and clear of oncoming traffic Correct answer.
  4. On the far left edge of the road

Explanation

Riding towards the centre of your lane keeps you clear of opening doors while maintaining a visible position. It also leaves room to react to hazards. The far left edge and the centre line both increase risk.

Question 45Road rules and safe riding

What is the safest way to approach a sharp left-hand bend on a country road?

  1. Set an appropriate speed before the bend and follow a smooth line within your lane Correct answer.
  2. Cross the centre line to straighten the bend
  3. Brake heavily while leaned over at the apex
  4. Enter wide, then tighten your line through the bend

Explanation

Setting speed before the bend lets you ride a smooth line with gentle inputs. Braking should be largely completed before you lean. Crossing the centre line is dangerous because of oncoming traffic.

Question 46Road rules and safe riding

You are riding in a group and approach a stop sign. What is the safest practice?

  1. Only the lead rider stops and the rest follow through
  2. The whole group stops together as one block
  3. Riders overtake each other to regroup after the stop
  4. Each rider stops individually and proceeds when it is safe Correct answer.

Explanation

Each rider must stop individually at a stop sign and proceed only when safe, so the group may become separated. Riders should regroup later at a safe location. Treating the group as one unit at a stop sign is unsafe and unlawful.

Question 47Road rules and safe riding

Why is it important to check your mirrors and blind spot before slowing for a hazard?

  1. To confirm the traffic behind can react and to choose a safe braking approach Correct answer.
  2. To check whether your brake light is working
  3. To signal other riders to overtake you
  4. To decide whether to accelerate instead

Explanation

Knowing what is behind you lets you brake in a way that gives following traffic time to react, reducing the risk of being hit from behind. It also helps you choose an escape path. Observation should precede any significant change in speed.

Question 48Road rules and safe riding

What is the main risk of riding in another vehicle's blind spot for an extended period?

  1. Your motorcycle will use more fuel
  2. The other driver may change lanes into your path without seeing you Correct answer.
  3. Your headlight will be less effective
  4. Your tyres will wear faster

Explanation

Staying in a blind spot means the driver may not see you and could move into your lane. Riders should either hang back or move ahead so they are visible in the mirrors. Being seen is a core defensive riding principle.

Question 49Road rules and safe riding

You are riding on a road with a painted median strip and need to turn right into a driveway. What is the safest approach?

  1. Use the median only as permitted by markings and check for traffic before turning Correct answer.
  2. Reverse into the driveway from the through lane
  3. Cross the median at a sharp angle without checking
  4. Stop on the median and wait for a long gap

Explanation

Painted medians may or may not permit certain movements, so you must follow the markings and check for traffic before turning. Crossing abruptly or stopping on a median can be dangerous. Plan the turn early and signal.

Question 50Road rules and safe riding

Why should you avoid riding with your foot resting on the gear lever or brake pedal?

  1. It can cause unintended braking or gear changes and reduces control Correct answer.
  2. It makes the engine run hotter
  3. It improves stability at speed
  4. It is required for smooth cornering

Explanation

Resting a foot on the controls can apply the brake or shift gears unintentionally, unsettling the bike and reducing control. Feet should be positioned on the pegs without pressure on the controls. This keeps the motorcycle predictable.