I85PREP
⌘ K
Dominica Driving Test study materials
Dominica Driving Test study resources

Dominica Driving Test practice questions

One question at a time. Build your Dominica Driving Test understanding.

First 50 of 199 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Signs, Signals and Markings

On Dominica's roads, a circular sign with a red border and a white background generally communicates which type of information?

  1. A service or facility available nearby
  2. A warning of a hazard ahead
  3. A prohibition or restriction that applies to road users Correct answer.
  4. A mandatory direction that must be followed

Explanation

Circular signs with a red rim belong to the regulatory family that prohibits or restricts behaviour, such as speed limits or entry bans. They tell you what you must not do or the limit that applies. Warning signs are normally triangular, and mandatory signs are usually blue circles.

Question 2Road Signs, Signals and Markings

A triangular road sign in Dominica with a red border and a symbol inside is designed to do what?

  1. Show the maximum speed permitted on the road
  2. Warn drivers of a hazard or changed condition ahead Correct answer.
  3. Order drivers to stop immediately at that point
  4. Identify a tourist attraction in the area

Explanation

Triangular signs with a red border are warning signs; the symbol inside shows the nature of the hazard, such as a bend, junction or slippery surface. They alert you to prepare to slow or adjust. They do not impose a stop or a speed limit by themselves.

Question 3Road Signs, Signals and Markings

What does a solid white line along the centre of a two-way road normally mean for a driver?

  1. You may overtake whenever the road ahead looks clear
  2. You must not cross or straddle it to overtake Correct answer.
  3. You may cross it only to enter or leave a side road or property
  4. You must drive with two wheels on the left of it

Explanation

A continuous solid centre line tells drivers not to cross or straddle it, most importantly to prevent overtaking where visibility or space is inadequate. Crossing is only acceptable in limited circumstances such as turning into a side road or driveway where it is safe and legal. It is not a general permission to overtake.

Question 4Road Signs, Signals and Markings

You approach a junction controlled by traffic lights and the amber (yellow) light appears as you near the stop line. What is the correct action?

  1. Continue at the same speed and ignore the change
  2. Stop at the line unless it is unsafe to do so Correct answer.
  3. Reverse away from the junction to wait
  4. Accelerate to pass the line before red appears

Explanation

An amber signal warns that red is about to follow, so you should stop at the stop line if you can do so safely. Only if you are so close that stopping abruptly would cause a collision should you continue through. Accelerating to beat the light is dangerous and unlawful.

Question 5Road Signs, Signals and Markings

A flashing red light at a railway level crossing in Dominica requires you to do what?

  1. Stop completely and wait until the signals stop flashing Correct answer.
  2. Sound your horn and cross quickly
  3. Slow down and proceed if no train is visible
  4. Treat it as a green light because it is flashing

Explanation

At a level crossing, flashing red lights mean stop and remain stopped until the lights cease flashing and any barriers are fully raised. You must not proceed merely because you cannot see a train. The flashing red is a positive stop instruction.

Question 6Road Signs, Signals and Markings

What is the meaning of the octagonal red sign bearing the word STOP at a Dominica junction?

  1. Slow down and continue if the road looks clear
  2. Stop only during the hours of darkness
  3. Stop only when another vehicle is approaching
  4. Come to a complete halt and give way before proceeding Correct answer.

Explanation

The octagonal STOP sign requires a full stop at the stop line or, if there is none, at the edge of the junction. You then give way to traffic on the priority road before moving off. A rolling slow-down does not satisfy the requirement.

Question 7Road Signs, Signals and Markings

A blue circular sign showing a white arrow curving to the left indicates what?

  1. A warning that the road bends sharply left
  2. A one-way street flowing to the right
  3. A mandatory direction to keep or turn left Correct answer.
  4. A prohibition on turning left

Explanation

Blue circular signs give positive mandatory instructions. A white arrow curving left on a blue circle means you must follow that direction, for example keep left of a bollard or turn left. It is an order, not a warning or a prohibition.

Question 8Road Signs, Signals and Markings

On a Dominica road, broken (dashed) white centre line markings generally permit which action when it is safe?

  1. Parking on the carriageway beside the line
  2. Ignoring the line at all times
  3. Driving on the right-hand side indefinitely
  4. Overtaking or crossing the line to change lanes Correct answer.

Explanation

A broken centre line indicates that crossing it is permitted when it is safe to do so, typically to overtake or change lanes. The driver must still judge visibility, oncoming traffic and any other restrictions. The line is a permission, not an obligation to cross.

Question 9Road Signs, Signals and Markings

You see a sign showing a pedestrian symbol inside a red triangle. What should you do?

  1. Expect pedestrians crossing ahead and be ready to slow or stop Correct answer.
  2. Stop immediately and wait for a green signal
  3. Maintain speed because pedestrians must give way to vehicles
  4. Sound your horn to clear pedestrians from the road

Explanation

A red triangle containing a pedestrian symbol warns of a pedestrian crossing or a place where pedestrians are likely in the road. You should reduce speed and prepare to stop if someone is crossing. It is a warning, not a signal-controlled stop.

Question 10Road Signs, Signals and Markings

A yellow box junction marking painted on the carriageway means a driver should do what?

  1. Enter the box only if the exit is clear, except when turning right Correct answer.
  2. Park inside the box for short deliveries
  3. Stop inside the box whenever traffic ahead is stationary
  4. Use the box as a waiting area during congestion

Explanation

A yellow box junction is designed to keep the junction clear. You may enter only if your exit is clear, with the usual exception that you may wait in the box when turning right and are prevented only by oncoming traffic. Stopping in the box otherwise blocks cross traffic.

Question 11Road Signs, Signals and Markings

What does a red circle containing the number 50 mean on a Dominica road?

  1. The maximum permitted speed is 50 km/h Correct answer.
  2. A warning that the road is 50 metres ahead
  3. A minimum speed of 50 km/h must be maintained
  4. A distance of 50 metres to the next junction

Explanation

A red-rimmed circle containing a number is a regulatory speed limit sign, so 50 means the maximum permitted speed is 50 km/h. It is an upper limit, not a target or minimum. Unless a different limit is posted, you must not exceed it.

Question 12Road Signs, Signals and Markings

A sign with a red diagonal bar across a black arrow pointing right means what?

  1. A right-hand bend is approaching
  2. Turn right ahead is compulsory
  3. Right turns are allowed only at night
  4. No right turn is permitted Correct answer.

Explanation

A prohibition sign uses a red circle with a diagonal bar over the symbol of the prohibited movement. A barred right arrow therefore means no right turn. Mandatory turns appear as plain blue circles with white arrows and no bar.

Question 13Road Signs, Signals and Markings

You are driving and approach a pedestrian crossing marked by broad white stripes on the road with no signal. How should you respond when a pedestrian is waiting?

  1. Continue at the limit because pedestrians must wait for a gap
  2. Flash your headlights to warn the pedestrian to stay back
  3. Slow down and be prepared to stop to let the pedestrian cross Correct answer.
  4. Speed up to pass before the pedestrian steps out

Explanation

At an uncontrolled pedestrian crossing, drivers should approach at a speed that allows them to stop and should give way to pedestrians waiting to cross. The markings exist to protect people on foot. Speeding past or intimidating a pedestrian is unsafe and contrary to the purpose of the crossing.

Question 14Road Signs, Signals and Markings

What does a triangular warning sign depicting a slippery road surface tell a driver to do?

  1. Change to a lower gear and accelerate hard
  2. Reduce speed and avoid sudden braking or steering Correct answer.
  3. Apply the handbrake gently while passing
  4. Increase speed to maintain grip through the hazard

Explanation

A slippery-road warning alerts you to reduced grip ahead, so you should ease off the accelerator, reduce speed smoothly and avoid harsh braking or steering inputs. Abrupt actions can cause a skid. The sign warns of a condition, not a required manoeuvre.

Question 15Road Signs, Signals and Markings

A traffic light shows a green arrow pointing left alongside a red full circle. What does this combination allow?

  1. Proceed straight ahead because any green light permits it
  2. Proceed only in the direction of the green arrow, giving way as required Correct answer.
  3. Turn left only after the full circle turns green
  4. Stop completely because a red light is showing

Explanation

A green arrow authorises movement in the direction it points even when the main circle is red, provided you give way to any traffic or pedestrians with priority. The red circle continues to prohibit other movements. Only the arrowed direction is permitted.

Question 16Road Signs, Signals and Markings

What is indicated by a rectangular blue sign showing a white letter 'P'?

  1. A police checkpoint is ahead
  2. Parking is permitted in the marked area Correct answer.
  3. A pedestrian zone begins here
  4. No parking is allowed at any time

Explanation

A blue rectangular sign bearing a white 'P' indicates a parking place where parking is allowed, often subject to conditions shown on supplementary plates. It is an information sign, not a prohibition. Restrictions such as time limits may appear beneath it.

Question 17Road Signs, Signals and Markings

A driver sees a solid white line on the left edge of the carriageway marking the edge of the road. What is its main purpose?

  1. To mark a place where overtaking is compulsory
  2. To separate opposing streams of traffic
  3. To show where vehicles may park freely
  4. To indicate the edge of the carriageway and guide drivers Correct answer.

Explanation

Edge lines define the boundary of the carriageway, helping drivers, especially in poor visibility or darkness, to judge where the road ends. They are a guidance marking. Opposing traffic streams are separated by centre lines, not edge lines.

Question 18Road Signs, Signals and Markings

A sign showing a black symbol of a car skidding inside a red triangle warns of what?

  1. A compulsory stop for all vehicles
  2. A steep hill requiring low gear
  3. A car park entrance ahead
  4. A slippery or loose surface where skidding is possible Correct answer.

Explanation

The skidding-car symbol is a warning sign for a slippery or loose road surface ahead. Drivers should reduce speed and handle the controls gently. It is distinct from hill warnings, which show a gradient symbol.

Question 19Road Signs, Signals and Markings

When a traffic light is out of order at a junction and no officer is present, what should a driver do?

  1. Ignore other traffic and take priority
  2. Treat the junction with caution and apply normal give-way rules Correct answer.
  3. Proceed at speed because the signals are not working
  4. Wait indefinitely until the lights are repaired

Explanation

If signals fail, the junction reverts to the normal priority rules, so you should approach with caution and give way as you would at an uncontrolled junction. You must be prepared to stop for cross traffic. Assuming priority or rushing through is dangerous.

Question 20Road Signs, Signals and Markings

What does a double solid white line in the centre of the road indicate?

  1. Neither direction may cross to overtake Correct answer.
  2. The road has become a one-way street
  3. Overtaking is permitted for both directions
  4. Only vehicles turning left may cross

Explanation

A double solid centre line means neither direction of traffic may cross it to overtake, usually because visibility or the road layout makes overtaking unsafe. It reinforces the restriction of a single solid line. It does not convert the road into a one-way street.

Question 21Road Signs, Signals and Markings

A driver approaches a 'Give Way' sign at a junction. What is the correct behaviour?

  1. Accelerate to merge ahead of main-road traffic
  2. Stop completely in every case before proceeding
  3. Sound the horn and proceed without looking
  4. Slow down, be ready to stop, and give priority to traffic on the main road Correct answer.

Explanation

A Give Way sign requires you to slow down, assess the traffic and give priority to vehicles on the road you are joining. A full stop is only necessary if traffic requires it. It differs from a STOP sign, which always requires a complete halt.

Question 22Road Signs, Signals and Markings

What does a yellow diamond-shaped sign with a black symbol typically indicate in road signage systems?

  1. A parking restriction
  2. A prohibition that carries a fine
  3. A warning of a hazard ahead requiring attention Correct answer.
  4. A compulsory direction of travel

Explanation

Diamond-shaped yellow signs are warning signs in many systems, alerting drivers to a hazard so they can adjust speed and position. They are cautionary rather than prohibitive. Prohibitions and compulsory directions use circular signs.

Question 23Road Signs, Signals and Markings

You are waiting to turn right at a junction and your exit is blocked by oncoming traffic, leaving you inside a yellow box junction. Is this acceptable?

  1. Only if you switch on your hazard lights
  2. No, you must never enter a box junction for any reason
  3. Yes, waiting in the box while turning right is the recognised exception Correct answer.
  4. Only if another driver waves you through

Explanation

The box junction rule keeps junctions clear, but there is a recognised exception: a driver turning right may wait in the box when prevented from completing the turn by oncoming traffic. Waiting for other reasons is not allowed. Hazard lights or another driver's wave do not change the rule.

Question 24Road Signs, Signals and Markings

A red circle with a white horizontal bar across it means what?

  1. End of the speed limit
  2. No overtaking permitted
  3. Stop and give way
  4. No entry for vehicular traffic Correct answer.

Explanation

A red circle containing a white horizontal bar is the 'no entry' sign, meaning vehicles must not proceed past it. It is often placed at the exit of a one-way street. It is not a stop sign, which is octagonal and bears the word STOP.

Question 25Road Signs, Signals and Markings

What is the purpose of hatched white markings painted on the carriageway, often bordered by solid lines?

  1. To provide a lane for overtaking
  2. To reserve space for pedestrians to walk
  3. To mark a place where U-turns are encouraged
  4. To separate traffic streams and keep vehicles off that area Correct answer.

Explanation

Hatched areas separate traffic streams or protect turning space and should not be entered except in an emergency or where a broken border permits it. They are not driving lanes. Entering them unnecessarily reduces safety margins.

Question 26Road Signs, Signals and Markings

On a Dominica road you see a circular sign with a red border and, inside it, a black bicycle symbol. What does this sign require of you?

  1. Cyclists must give way to motor traffic here
  2. A cycle route crosses or joins the road ahead Correct answer.
  3. Bicycles are prohibited from the road ahead
  4. No entry for any vehicle except bicycles

Explanation

A red-bordered circle is a prohibition sign, but the meaning depends on the symbol; where the symbol shows a permitted class of traffic the sign warns that cyclists are present or crossing. In practice a red-ringed bicycle sign warns drivers that a cycle crossing or cycle route intersects the road, so they should slow and watch for cyclists. It does not ban bicycles, which would be shown differently, and it does not create a give-way rule for cyclists.

Question 27Road Signs, Signals and Markings

A traffic light shows a flashing amber light at a pelican-style pedestrian crossing. What is the correct driver response?

  1. Stop and remain stopped until the light turns green
  2. Proceed only if the crossing is clear of pedestrians Correct answer.
  3. Treat it exactly as a red light and wait
  4. Sound the horn to warn pedestrians before moving

Explanation

A flashing amber signal at a pedestrian crossing means drivers may proceed but must give way to any pedestrian still on the crossing. The driver should check that the crossing is clear and only then continue. It is not equivalent to red, and it does not require waiting for a green light.

Question 28Road Signs, Signals and Markings

You are driving on a Dominica road and see a warning sign with a red triangle containing a symbol of two children. What is the appropriate action?

  1. Reduce speed and watch for children near a school or playground Correct answer.
  2. Change lane to the right and accelerate past
  3. Stop immediately and wait for a supervisor
  4. Expect children to give way to your vehicle

Explanation

A red triangle is a warning sign, and the children symbol warns of a school, playground, or area where children may be in or near the road. The correct response is to slow down and be ready to stop, since children may move unpredictably. It does not require a full stop unless people are actually in the road.

Question 29Road Signs, Signals and Markings

A road marking shows a single broken white line across the mouth of a side road entering a main road. What does this marking indicate to a driver leaving the side road?

  1. They must give way to traffic on the main road Correct answer.
  2. They must stop completely before entering
  3. They may enter without checking if turning left
  4. They have priority over traffic on the main road

Explanation

A broken white line across the mouth of a side road marks a give-way line, meaning drivers emerging must yield to traffic already on the main road. A driver should slow, look both ways, and enter only when there is a safe gap. It is not a stop line, which would be solid.

Question 30Road Signs, Signals and Markings

You approach a junction where the traffic lights are working but a police officer is directing traffic with hand signals that conflict with the lights. Whose instruction should you follow?

  1. The vehicle in front, following it through
  2. The traffic lights, because they are the primary control
  3. Whichever allows you to move first
  4. The police officer, because an officer's directions override signals Correct answer.

Explanation

When a police officer is controlling a junction, their signals take precedence over traffic lights and signs. Drivers must obey the officer even where the lights show something different, because the officer can see conditions the signals cannot. Following other vehicles or racing the lights risks a collision.

Question 31Road Signs, Signals and Markings

A driver sees a sign with a red circle containing a black arrow bending sharply to the left with a red diagonal bar across it. What does this combination mean?

  1. Sharp left bend ahead, drive with caution
  2. No left turn permitted Correct answer.
  3. Left turn only for buses
  4. Road narrows on the left ahead

Explanation

A red circle with a diagonal bar is a prohibition, and the arrow inside identifies the movement prohibited, so the sign bans turning left at that point. Warning signs for bends are triangles, not circles. Drivers must continue ahead or use another route as permitted.

Question 32Road Signs, Signals and Markings

On a two-way road, the centre line changes from broken white to a double solid white line. What does this change mean for a driver who wishes to overtake?

  1. Overtaking across the line is prohibited for traffic on both sides Correct answer.
  2. Overtaking is allowed but only at night
  3. Overtaking is allowed if the road ahead looks clear
  4. Only heavy vehicles are barred from crossing the line

Explanation

A double solid white centre line means neither direction of traffic may cross it to overtake or turn across it, usually because visibility or the road layout makes it unsafe. A driver must stay in lane and wait until the marking changes to a broken line where crossing is permitted. Judging the road 'clear' does not override the marking.

Question 33Road Signs, Signals and Markings

A driver on a wet Dominica road sees a warning sign in a red triangle showing a car with wavy skid marks behind it. What does this sign most directly warn of?

  1. A ford where water crosses the road
  2. A slippery surface where grip is reduced Correct answer.
  3. A steep hill requiring a lower gear
  4. A vehicle repair area ahead

Explanation

The skidding-car symbol in a warning triangle indicates a slippery road surface, often caused by rain, oil, or loose material. Drivers should reduce speed, avoid sudden braking or steering, and increase the gap to the vehicle ahead. It does not mean a hill, works, or a water crossing, each of which has its own symbol.

Question 34Road Signs, Signals and Markings

You are driving at night on an unlit road and approach a junction controlled by traffic lights that you cannot yet see clearly. What is the safest approach consistent with Dominica road rules?

  1. Use the horn continuously until you pass
  2. Slow down so you can stop if the signal is red or amber Correct answer.
  3. Maintain speed so you clear the junction quickly
  4. Flash headlights and proceed without slowing

Explanation

Where a signal-controlled junction cannot be seen in good time, the driver should reduce speed so there is time to respond to a red or amber light. Approach speed should always allow stopping within the distance you can see to be clear. Flashing lights or sounding the horn does not give priority.

Question 35Road Signs, Signals and Markings

A blue circular sign shows a white arrow pointing straight ahead. How should a driver treat this sign?

  1. It is an advisory suggestion that may be ignored
  2. It marks the start of a one-way street in the opposite direction
  3. It is a warning that the road ahead is closed
  4. It is a mandatory direction requiring travel straight ahead Correct answer.

Explanation

Blue circular signs give mandatory instructions, and a white arrow pointing straight ahead requires traffic to continue in that direction. Drivers may not turn off at that point unless another sign permits it. It is an order, not advice, and it does not by itself indicate a closure.

Question 36Road Signs, Signals and Markings

A driver is waiting at a red light and the light changes to green, but the junction ahead is blocked by queuing traffic. What should the driver do?

  1. Sound the horn until the queue moves
  2. Edge forward onto the pedestrian crossing to hold position
  3. Stay behind the stop line until there is room beyond the junction Correct answer.
  4. Enter the junction and wait in the middle of it

Explanation

A green light permits movement only if the driver can clear the junction; entering a blocked junction obstructs cross traffic and pedestrians. The driver should remain behind the stop line until space is available on the far side. Blocking a crossing or the junction box is an offence and creates conflict.

Question 37Road Signs, Signals and Markings

What is the purpose of a yellow diamond-shaped sign bearing a black symbol, as used in many road signage systems?

  1. To give a mandatory instruction that must be obeyed
  2. To indicate a parking restriction zone
  3. To warn of a hazard ahead so drivers can prepare Correct answer.
  4. To show the route number of the road

Explanation

A diamond-shaped sign, commonly yellow with a black symbol, functions as a warning of a hazard or condition ahead, giving drivers time to adjust speed and position. Warning signs differ from circular signs, which impose mandatory instructions or prohibitions. They do not mark parking zones or route numbers.

Question 38Road Signs, Signals and Markings

A driver sees hatched white markings on the carriageway bordered by a solid white line on the driver's side. How should the driver treat the hatched area?

  1. Use it to overtake slower vehicles
  2. Park on it briefly while making a delivery
  3. Use it as a normal lane when traffic is heavy
  4. Treat it as an area not to be entered except in an emergency Correct answer.

Explanation

Hatched areas separate traffic streams or protect turning space, and where the boundary line on the driver's side is solid the area must not be entered except in an emergency. Drivers should stay in their lane and not use the hatching to gain advantage. Parking or overtaking there is not permitted.

Question 39Road Signs, Signals and Markings

At a crossroads with no signs, signals, or markings, two vehicles arrive at about the same time, one from your right. What does the general rule require in Dominica?

  1. The faster vehicle has priority
  2. The vehicle on the left always goes first
  3. The larger vehicle has priority
  4. You should give way to the vehicle approaching from your right Correct answer.

Explanation

Where no signs, signals or markings establish priority at an uncontrolled junction, the general rule is to give way to traffic approaching from the right. Drivers should still slow and be prepared to stop if the other vehicle does not appear to yield. Vehicle size or speed confers no priority.

Question 40Road Signs, Signals and Markings

A driver approaches a level crossing where a sign shows a gate or barrier symbol and a red light begins flashing after the driver has already passed the stop line. What is the correct action?

  1. Accelerate and weave around the barriers
  2. Stop on the crossing and wait for the train to pass
  3. Continue clear of the crossing without stopping on it Correct answer.
  4. Reverse back behind the stop line immediately

Explanation

Once a vehicle has crossed the stop line it should keep moving so it clears the crossing and does not become stranded on the track. Reversing back is dangerous because following traffic and the barrier may make it impossible. A driver must never stop on the crossing or attempt to pass lowered barriers.

Question 41Traffic Rules and Right-of-Way

On a standard two-lane road in Dominica, on which side of the road must you drive?

  1. On the left side Correct answer.
  2. On whichever side has less traffic
  3. In the centre of the road
  4. On the right side

Explanation

Dominica follows the left-hand traffic system inherited from British practice, so vehicles keep to the left at all times. Driving on the right would put you head-on into oncoming traffic. The centre line and traffic conditions never change this basic rule.

Question 42Traffic Rules and Right-of-Way

You are approaching an unmarked crossroads where two roads of equal size meet and no signs are present. Who has the right of way?

  1. The vehicle approaching from your left Correct answer.
  2. The vehicle travelling fastest
  3. The vehicle approaching from your right
  4. The larger vehicle

Explanation

Where no signs or markings give priority at an equal junction, you must give way to traffic approaching from your left. This mirrors the keep-left system, since that traffic would otherwise cross your path. Size and speed of the other vehicle are irrelevant.

Question 43Traffic Rules and Right-of-Way

A roundabout in Dominica is not controlled by traffic lights or signs. Which traffic must you give way to before entering?

  1. Traffic already circulating on the roundabout Correct answer.
  2. No traffic, because entering vehicles have priority
  3. Traffic entering from the road opposite
  4. Traffic waiting behind you

Explanation

You must yield to vehicles already on the roundabout, which in left-hand traffic approach from your right around the circle. Only when there is a safe gap should you enter. Traffic behind you and traffic on other approach roads have no claim on your entry.

Question 44Traffic Rules and Right-of-Way

You want to turn left at a junction and a pedestrian is already crossing the road you intend to enter. What must you do?

  1. Proceed, because turning vehicles have priority
  2. Drive around the pedestrian behind them
  3. Stop and let the pedestrian finish crossing Correct answer.
  4. Sound your horn and continue turning

Explanation

A pedestrian already crossing the road has priority, and a turning vehicle must give way to them. You should stop before the crossing and wait until the pedestrian has cleared your path. Horn use and driving around a pedestrian are both dangerous and unlawful.

Question 45Traffic Rules and Right-of-Way

An ambulance approaches from behind with its siren and blue lights on while you are in slow traffic. What is the correct response?

  1. Continue at the same speed and ignore it
  2. Pull over safely and let it pass Correct answer.
  3. Speed up to stay ahead of it
  4. Brake sharply and stop where you are

Explanation

Emergency vehicles on call have priority, and other drivers should make way by pulling over safely as soon as possible. Braking abruptly in traffic can cause a collision, and speeding up obstructs the emergency response. Ignoring the vehicle delays potentially life-saving help.

Question 46Traffic Rules and Right-of-Way

A police officer is directing traffic at an intersection with hand signals while the traffic lights show green for your direction. Whose direction must you follow?

  1. The police officer Correct answer.
  2. The traffic lights
  3. The vehicle in front of you
  4. Your own judgement of the traffic flow

Explanation

A police officer directing traffic overrides both signals and road markings. You must obey the officer's signals even when the lights indicate otherwise. Following the lights or the vehicle ahead could put you in conflict with the officer's instructions.

Question 47Traffic Rules and Right-of-Way

You are driving and a school bus has stopped ahead with its hazard lights flashing and children nearby. What should you do?

  1. Sound your horn continuously as you pass
  2. Overtake quickly before children step out
  3. Slow down and pass only when it is safe, watching for children Correct answer.
  4. Stop permanently until the bus moves

Explanation

A stopped school bus with children around demands reduced speed and heightened caution, because a child may step into the road unexpectedly. You may pass only when you are sure it is safe. Overtaking quickly or blaring the horn endangers children.

Question 48Traffic Rules and Right-of-Way

At a pedestrian crossing, a person is standing on the pavement but has not yet stepped onto the road. What is the safest and legally correct action?

  1. Wave them back onto the pavement
  2. Stop and allow them to cross Correct answer.
  3. Accelerate to pass before they step out
  4. Continue at the same speed

Explanation

A person waiting at a crossing is signalling an intention to cross, and drivers should slow and stop to let them do so. Failing to stop risks a collision and breaches the duty to give way. Speeding up or continuing unchanged ignores the pedestrian's clear intention.

Question 49Traffic Rules and Right-of-Way

You intend to turn right from a main road into a side road. An oncoming vehicle is approaching but is still some distance away. What should you do?

  1. Wait until the oncoming vehicle has passed or it is clearly safe to turn Correct answer.
  2. Move into the oncoming lane and wait there
  3. Turn immediately, since turning traffic has priority
  4. Flash your headlights to warn the oncoming driver

Explanation

When turning right across oncoming traffic you must give way to vehicles coming towards you. You should wait for a safe gap before completing the turn. Turning immediately or entering the oncoming lane creates a head-on risk.

Question 50Traffic Rules and Right-of-Way

Two vehicles reach a steep, narrow section of road where only one can pass. One is going uphill and the other downhill. Who should give way?

  1. The downhill vehicle Correct answer.
  2. The uphill vehicle
  3. The vehicle that arrived first
  4. The heavier vehicle

Explanation

On a narrow incline the descending vehicle should give way, because it is generally easier for a downhill vehicle to stop and pull aside than for an uphill vehicle to restart. This is the standard convention for single-track hill sections. Weight and arrival order do not settle the matter.