I85PREP
⌘ K
Georgia DMV Permit Test study materials
Georgia DMV Permit Test study resources

Georgia DMV Permit Test practice questions

One question at a time. Build your Georgia DMV Permit Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Signs and Signals

A sign shaped like an octagon with a white border always means:

  1. Slow down and yield to traffic
  2. Railroad crossing is ahead
  3. Do not enter this roadway
  4. Come to a complete stop Correct answer.

Explanation

The eight-sided octagon is used only for STOP signs in the United States. A driver must stop behind the stop line or crosswalk and continue only when the way is clear.

Question 2Road Signs and Signals

Warning signs that alert drivers to hazards ahead are usually:

  1. Green rectangles with white lettering
  2. Yellow diamonds with black symbols Correct answer.
  3. White rectangles with black lettering
  4. Orange circles with black symbols

Explanation

Warning signs are yellow diamonds carrying black letters or symbols, a combination reserved so drivers notice them quickly and have time to react to a hazard.

Question 3Road Signs and Signals

A flashing red traffic light means:

  1. Slow down and yield to cross traffic
  2. The signal is out of order and can be ignored
  3. Stop, then go when it is safe Correct answer.
  4. Proceed without stopping if the road looks clear

Explanation

A flashing red signal is treated like a stop sign: come to a full stop and proceed only after checking that the way is clear. It is commonly used at intersections that do not need a full signal at all hours.

Question 4Road Signs and Signals

To signal a left turn by hand, a driver extends the left arm:

  1. Out of the window and angled down
  2. Downward with the palm facing rear
  3. Upward with the elbow bent
  4. Straight out horizontally Correct answer.

Explanation

The three standard hand signals are arm straight out for a left turn, arm bent upward at the elbow for a right turn, and arm downward with the palm to the rear for slowing or stopping.

Question 5Road Signs and Signals

Signs that tell drivers what they must or must not do, such as speed limits and turning rules, are called:

  1. Warning signs
  2. Construction signs
  3. Regulatory signs Correct answer.
  4. Guide signs

Explanation

Regulatory signs set the rules of the road and must be obeyed; failing to follow one can be cited as a traffic violation. They are usually white with black, red, or green markings.

Question 6Road Signs and Signals

A speed limit sign is recognizable as:

  1. A green rectangle with white numbers
  2. A yellow diamond with a black number
  3. An orange square with black numbers
  4. A white rectangle with black numbers Correct answer.

Explanation

Speed limit signs are regulatory signs: white rectangles with black numerals and the words SPEED LIMIT. The number posted is the maximum lawful speed under good conditions.

Question 7Road Signs and Signals

A round yellow sign with a black X and the letters RR warns of:

  1. A bridge with a weight limit
  2. An intersection with a roundabout
  3. A pedestrian crossing
  4. A railroad crossing ahead Correct answer.

Explanation

The round yellow railroad advance warning sign tells drivers the tracks are close and that they should slow down and look for a train. The crossbuck and pavement markings appear at the tracks themselves.

Question 8Road Signs and Signals

A red square sign with a white horizontal bar means:

  1. Stop completely before proceeding
  2. One-way traffic begins here
  3. No parking at any time
  4. Do not enter Correct answer.

Explanation

The red square with a white bar is the DO NOT ENTER sign, typically posted where a one-way road or ramp exits toward oncoming drivers. Passing it puts a vehicle head-on against traffic.

Question 9Road Signs and Signals

In Georgia, a driver stopped at a steady red light may turn right when:

  1. The driver stops and yields, and no sign forbids it Correct answer.
  2. The driver slows without stopping if the road looks clear
  3. The driver is in the left lane of a two-way road
  4. The light has been red for at least thirty seconds

Explanation

Georgia allows a right turn on red only after a full stop, and the driver must yield to pedestrians and cross traffic. A NO TURN ON RED sign at that location cancels the permission.

Question 10Road Signs and Signals

A flashing yellow light at an intersection tells a driver to:

  1. Treat the intersection as a four-way stop
  2. Slow down and proceed with caution Correct answer.
  3. Stop and wait for the light to turn green
  4. Yield only to vehicles coming from the right

Explanation

A flashing yellow signal gives no right of way by itself; it warns drivers to slow down and cross carefully. Where one road flashes yellow and the other flashes red, the yellow road must yield to traffic on the red road.

Question 11Road Signs and Signals

A double solid yellow line in the center of a road means:

  1. The road ahead is one-way
  2. Passing is allowed when the way ahead is clear
  3. Traffic in both directions may cross to pass
  4. No passing in either direction Correct answer.

Explanation

Two solid yellow lines mark a no-passing zone for traffic moving in both directions. A driver may still cross them where the law allows, such as turning into a driveway or side road.

Question 12Road Signs and Signals

A broken white line between two lanes means:

  1. The lane is reserved for buses
  2. Passing is never permitted across the line
  3. The lanes may be crossed when it is safe Correct answer.
  4. Vehicles must stay in their lane at all times

Explanation

Broken white lines separate lanes traveling in the same direction and may be crossed for a lane change when it is safe. Solid white lines discourage or prohibit lane changes.

Question 13Road Signs and Signals

The five-sided (pentagon) sign is used to mark:

  1. A hospital entrance ahead
  2. A railroad crossing is ahead
  3. A school zone or crossing Correct answer.
  4. A highway weigh station

Explanation

The pentagon shape is reserved for school signs, so a driver recognizes a school area even when the sign is seen from behind or in poor visibility. Slow down and watch for children whenever one appears.

Question 14Road Signs and Signals

A steady green left-turn arrow means:

  1. Left turns are prohibited at this time
  2. Turn left after yielding to oncoming traffic
  3. Turn left; oncoming traffic is stopped Correct answer.
  4. Proceed straight or turn left

Explanation

A green arrow gives a protected turn because oncoming traffic is held by a red light, so the turn may be completed without yielding. The protection ends when the arrow changes to yellow, turns red, or disappears.

Question 15Road Signs and Signals

A steady red right-turn arrow means:

  1. Right turn permitted after a full stop
  2. No right turn while the arrow is red Correct answer.
  3. The arrow applies only to trucks
  4. Right turn permitted if the road is clear

Explanation

A red arrow prohibits the movement it points to for as long as it is shown. The driver must wait in the proper lane until a green arrow or circular green appears.

Question 16Road Signs and Signals

An overhead signal shows a yellow X above your lane. You should:

  1. Use the lane for passing only
  2. Stay in the lane but slow down sharply
  3. Stop in the lane and wait for a green arrow
  4. Leave the lane as soon as it is safe Correct answer.

Explanation

A yellow X warns that the lane will close ahead, so a driver should merge out of it while there is room. A red X means the lane is already closed and must not be entered.

Question 17Road Signs and Signals

Orange signs with black lettering are normally used to:

  1. Mark school crossing areas
  2. Warn of road work ahead Correct answer.
  3. Show mandatory speed limits
  4. Guide drivers to nearby cities

Explanation

Orange is the color used for traffic control in work zones, including warning signs, arrow boards, and channeling devices. Penalties for moving violations are often higher when workers are present.

Question 18Road Signs and Signals

At a yield sign, a driver must:

  1. Stop only if another vehicle is already stopped
  2. Slow down and give the right of way when needed Correct answer.
  3. Increase speed to merge with traffic quickly
  4. Come to a complete stop before entering

Explanation

A yield sign requires the driver to slow and let traffic on the through road go first, stopping only if that is necessary to avoid a conflict. Once a safe gap exists, the driver may continue without a full stop.

Question 19Road Signs and Signals

A yellow diamond sign showing a walking figure means:

  1. Watch for pedestrians crossing ahead Correct answer.
  2. A pedestrian overpass is ahead
  3. Pedestrians are not allowed on this road
  4. The road ends at a pedestrian mall

Explanation

The pedestrian warning sign alerts drivers to people who may be crossing or walking along the roadway. Drivers should reduce speed and be prepared to stop for them.

Question 20Road Signs and Signals

A driver's left arm is extended downward with the palm facing the vehicles behind. This signals:

  1. A left turn is coming
  2. The driver is about to park
  3. Slowing or stopping Correct answer.
  4. A right turn is coming

Explanation

The downward arm with the palm to the rear is the hand signal for slowing or stopping. Turn signals use the arm straight out for a left turn and bent upward for a right turn.

Question 21Road Signs and Signals

In Georgia, a left turn on a steady red light is legal only when:

  1. Both streets are one-way and no sign forbids it Correct answer.
  2. The driver stops and the cross street has no traffic
  3. The cross street has a flashing yellow signal
  4. The turn is made from the left lane of a two-way street

Explanation

Georgia permits a left turn on red only from a one-way street onto another one-way street, after a full stop and a yield, and only if no sign prohibits it. The turn must still give way to pedestrians and cross traffic.

Question 22Road Signs and Signals

A series of chevron signs (black on yellow) along the outside of a curve is used to:

  1. Guide drivers through a sharp turn Correct answer.
  2. Warn that the road narrows to one lane
  3. Mark the end of a passing zone
  4. Show the legal speed limit for the curve

Explanation

Chevron alignment signs are placed on the outside of a sharp curve to show its direction and help drivers steer through it. They supplement, but do not replace, the curve warning sign and posted speed limit.

Question 23Road Signs and Signals

A yellow diamond sign shows two arrows, one pointing up and one pointing down. It indicates:

  1. A roundabout is ahead
  2. Passing is allowed in either lane
  3. A divided highway begins ahead
  4. Two-way traffic is ahead Correct answer.

Explanation

The two-way traffic warning tells drivers that opposing traffic will share the roadway, often after a one-way section or the end of a divided highway. Keep to the right and do not assume the left lane belongs to you.

Question 24Road Signs and Signals

A driver with a green light wants to cross an intersection, but traffic on the far side is stopped and there is no room. The driver should:

  1. Enter the intersection and wait there for space
  2. Enter only after the light turns yellow
  3. Wait behind the line until there is room Correct answer.
  4. Sound the horn until the traffic moves

Explanation

A green light authorizes entering the intersection only if the driver can clear it; blocking the box is illegal and stalls cross traffic and pedestrians. The driver should wait behind the stop line or crosswalk until space opens.

Question 25Road Signs and Signals

At a stop sign where a white stop line is painted, a driver must stop:

  1. Before the stop line Correct answer.
  2. Anywhere inside the crosswalk
  3. Beside the stop sign post
  4. At the edge of the intersecting road

Explanation

The stop line marks where the vehicle must stop so it does not intrude on the crosswalk or the intersection. If no line is painted, stop before the crosswalk, and if there is no crosswalk, before entering the intersection.

Question 26Road Signs and Signals

The only eight-sided traffic sign on U.S. roads is the:

  1. yield sign
  2. school zone sign
  3. stop sign Correct answer.
  4. railroad crossing sign

Explanation

The stop sign is an octagon, an eight-sided shape used for no other sign so it can be recognized even when covered with snow or seen from behind. Drivers must come to a complete stop at it.

Question 27Road Signs and Signals

A pedestrian signal shows a flashing orange hand. A pedestrian who has not yet stepped into the crosswalk should:

  1. cross only if no cars are visible
  2. press the button and cross anyway
  3. begin crossing quickly
  4. wait for the next walk interval Correct answer.

Explanation

The flashing hand warns that the walk interval is ending and that pedestrians should not start crossing. A pedestrian already in the crosswalk should finish crossing without delay.

Question 28Road Signs and Signals

A blue sign along a highway generally provides information about:

  1. motorist services such as fuel and food Correct answer.
  2. regulatory requirements
  3. road construction
  4. recreation areas and parks

Explanation

Blue signs with white symbols or lettering direct drivers to motorist services such as fuel, food, lodging, and hospitals. They are informational rather than regulatory.

Question 29Road Signs and Signals

A white sign with a red circle and a diagonal red slash through a symbol means:

  1. the action shown is required
  2. the action shown is prohibited Correct answer.
  3. the action shown is recommended
  4. the sign applies only to trucks

Explanation

A red circle with a diagonal slash is the standard symbol for a prohibition, such as no left turn or no parking. The symbol inside shows what may not be done.

Question 30Road Signs and Signals

A driver extends the left arm out the window and bends it upward at the elbow. This hand signal means:

  1. right turn Correct answer.
  2. left turn
  3. slowing or stopping
  4. backing up

Explanation

Hand signals are used when turn signals fail or are not visible. Arm straight out means left turn, arm bent upward means right turn, and arm downward with palm back means slowing or stopping.

Question 31Road Signs and Signals

Brown signs with white lettering are used to guide drivers to:

  1. hospitals and emergency services
  2. weigh stations and inspection sites
  3. road construction areas
  4. parks and historical sites Correct answer.

Explanation

Brown signs identify recreation areas, parks, historical sites, and other points of interest. They are guide signs, not regulatory or warning signs.

Question 32Road Signs and Signals

A solid white line along the right side of your lane marks:

  1. the right edge of the roadway Correct answer.
  2. a boundary you may never cross
  3. a lane where passing is allowed
  4. the center line of a two-way road

Explanation

A solid white edge line marks the right edge of the roadway. You may cross it where it is legal to park or to enter a shoulder, but it is not a lane line for passing.

Question 33Road Signs and Signals

Two solid white lines separating lanes on a multi-lane road mean:

  1. traffic in the right lane must exit
  2. the lane is reserved for carpools
  3. passing is permitted in either lane
  4. crossing them to change lanes is prohibited Correct answer.

Explanation

Double solid white lines separate lanes moving in the same direction, and crossing them to change lanes is prohibited. They are often used where lane changes are dangerous, such as near interchanges.

Question 34Road Signs and Signals

On a two-way road, the line on your side is broken yellow and the line on the other side is solid yellow. This means:

  1. passing is prohibited for both directions
  2. the road is one-way
  3. passing is prohibited for you
  4. you may pass, but opposing traffic may not Correct answer.

Explanation

A broken yellow line on your side permits you to cross the center line to pass when it is safe. The solid line on the other side prohibits passing for traffic coming the other way.

Question 35Road Signs and Signals

An overhead lane signal shows a red X above your lane. You should:

  1. treat it as a yield and merge left
  2. move to an open lane Correct answer.
  3. continue in the lane but slow down
  4. stop and wait for a green arrow

Explanation

A red X over a lane means that lane is closed ahead, so you must leave it and move to a lane marked with a green arrow or no signal. Changing lanes should be done when it is safe.

Question 36Road Signs and Signals

A steady green right-turn arrow is shown while the circular light is red. A driver in the right-turn lane may:

  1. turn right only after coming to a full stop
  2. turn right; the arrow is a protected movement Correct answer.
  3. turn right only after yielding to oncoming traffic
  4. not turn until the circular light turns green

Explanation

A green arrow gives a protected movement, meaning conflicting traffic is stopped and the turn may be made without yielding to oncoming vehicles. Drivers should still watch for pedestrians and complete the turn carefully.

Question 37Road Signs and Signals

A yellow diamond sign showing a black traffic signal warns that:

  1. the signal ahead is out of order
  2. a stop sign is ahead
  3. a traffic signal is ahead Correct answer.
  4. a railroad crossing is ahead

Explanation

The traffic-signal warning sign tells drivers a signal is coming so they can prepare to stop if it is red. It does not indicate whether the signal is working.

Question 38Road Signs and Signals

A flashing yellow left-turn arrow means:

  1. you may turn left after yielding to traffic Correct answer.
  2. you must stop and wait for a green arrow
  3. left turns are prohibited at this intersection
  4. left turns are protected from oncoming traffic

Explanation

A flashing yellow arrow permits the left turn, but it is not protected, so the driver must yield to oncoming traffic and to pedestrians before turning. A steady green arrow is used when the turn is protected.

Question 39Road Signs and Signals

A two-way left-turn lane is marked by solid yellow lines on the outside and broken yellow lines inside. It may be used:

  1. as a travel lane during rush hour
  2. by buses only
  3. for passing slower vehicles
  4. only for left turns from either direction Correct answer.

Explanation

A two-way left-turn lane is shared by traffic moving in both directions and is reserved for left turns into or out of driveways or side roads. It is not a travel or passing lane and should not be used to merge into traffic.

Question 40Road Signs and Signals

A yellow diamond showing a curve with a small 35 MPH plaque means:

  1. the legal speed limit is 35 mph at all times
  2. 35 mph is the recommended speed for the curve Correct answer.
  3. the minimum speed through the curve is 35 mph
  4. trucks must not exceed 35 mph on the entire road

Explanation

A speed plaque on a warning sign gives an advisory speed, the maximum speed considered safe for the hazard under good conditions. The legal speed limit is set separately by a regulatory speed limit sign.

Question 41Road Signs and Signals

At a railroad crossing marked only by a crossbuck sign, a driver must:

  1. proceed without slowing if no lights are flashing
  2. stop only when a train is visible
  3. come to a complete stop before every crossing
  4. yield to trains, which have the right of way Correct answer.

Explanation

A crossbuck sign means the same thing as a yield sign at a railroad crossing: slow down, look and listen, and yield to any train. Trains always have the right of way because they cannot stop quickly.

Question 42Road Signs and Signals

A rectangular white sign with black lettering reading ONE WAY and an arrow means:

  1. travel only in the direction of the arrow Correct answer.
  2. the road becomes two-way ahead
  3. you must turn at the next intersection
  4. the lane is reserved for turning traffic

Explanation

The ONE WAY sign tells drivers that traffic on that road or lane moves only in the direction shown by the arrow. Driving against the arrow is illegal and dangerous.

Question 43Road Signs and Signals

A WRONG WAY sign facing you means:

  1. the road ahead is closed to all traffic
  2. you should yield to traffic on the right
  3. a one-way road begins ahead
  4. you are heading against traffic on a one-way road Correct answer.

Explanation

The WRONG WAY sign is posted where a driver might mistakenly enter a one-way road or exit ramp against traffic. Seeing it means you must stop and turn around before continuing.

Question 44Road Signs and Signals

You approach an intersection where the traffic signal is completely dark because of a power failure. You should:

  1. wait at the intersection until the power returns
  2. treat the dark signal as a yield sign
  3. treat it as an all-way stop and yield Correct answer.
  4. proceed through without stopping if no cars are near

Explanation

When a signal is not working, drivers must treat the intersection like an all-way stop, coming to a full stop and taking turns in order of arrival. Proceeding without stopping risks a collision with cross traffic.

Question 45Road Signs and Signals

A police officer is directing traffic at an intersection and motions you to stop, but your light is green. You should:

  1. obey the officer and stop Correct answer.
  2. stop only if other cars are crossing
  3. sound your horn and continue
  4. follow the green light and proceed

Explanation

Directions from a police officer override traffic signals, signs, and pavement markings. If an officer signals you to stop, you must stop even if your light is green.

Question 46Road Signs and Signals

A white diamond symbol painted in a lane indicates:

  1. an HOV lane during posted hours Correct answer.
  2. a lane reserved for passing
  3. a lane that ends ahead
  4. a lane reserved for bicycles

Explanation

A white diamond marks a high-occupancy vehicle lane, reserved during posted hours for carpools, buses, and other qualifying vehicles. A solo driver who uses the lane during those hours can be cited.

Question 47Road Signs and Signals

You are in the left-turn lane and see a red left arrow while the circular signal is green for through traffic. You may:

  1. treat the red arrow as a yield sign
  2. turn left after yielding to oncoming traffic
  3. turn left if no oncoming cars are visible
  4. not turn left until the arrow changes Correct answer.

Explanation

A red left arrow controls the left-turn movement and prohibits the turn even though through traffic has a green light. The driver must wait in the turn lane until the left-turn signal shows a green arrow or another permitted indication.

Question 48Road Signs and Signals

A school bus with red lights flashing is stopped on the opposite side of a divided highway separated by a raised median. You are traveling the other direction. You must:

  1. continue without stopping Correct answer.
  2. stop only if children are visible
  3. slow to 10 mph and proceed
  4. stop until the red lights stop flashing

Explanation

On a divided highway with a raised median or barrier, traffic on the opposite side of the roadway is not required to stop for a school bus loading or unloading children. Traffic traveling in the same direction as the bus must stop.

Question 49Road Signs and Signals

Which shape is used exclusively for STOP signs on United States roadways?

  1. Downward-pointing triangle
  2. Octagon Correct answer.
  3. Circle
  4. Five-sided pentagon

Explanation

STOP signs use the eight-sided octagon shape so drivers can identify them instantly, even from the back or when the word is obscured by snow or distance. No other sign shares this shape, which is why a rolling stop at an unmarked octagon is still a violation.

Question 50Road Signs and Signals

You approach an intersection where the traffic signal in your lane is flashing red. What is the proper action?

  1. Continue through without stopping if your light was green earlier
  2. Come to a full stop, then yield and proceed when clear Correct answer.
  3. Stop only if another vehicle is already inside the intersection
  4. Yield to traffic on your right without coming to a stop

Explanation

A flashing red signal carries the same meaning as a STOP sign: you must make a complete stop behind the limit line or crosswalk, yield to cross traffic and pedestrians, and enter only when it is safe. A flashing yellow, by contrast, allows you to proceed with caution without stopping.