I85PREP
⌘ K
Gambia Driving Test study materials
Gambia Driving Test study resources

Gambia Driving Test practice questions

One question at a time. Build your Gambia Driving Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road signs, signals and road markings

You are driving into a built-up area and see a circular sign with a red border and the number 50 in the centre. What does this sign require of you?

  1. You must not exceed 50 km/h until a sign shows a different limit or the restriction ends Correct answer.
  2. You may drive up to 50 mph if the road is clear
  3. You must drive at exactly 50 km/h at all times
  4. You must reduce speed to 50 km/h only when approaching a junction

Explanation

A red-bordered circle carrying a number is a regulatory maximum speed sign, and the figure is in kilometres per hour. The limit applies from the sign until another sign changes it or an end-of-restriction sign appears. It is a ceiling, not a target, so slower speeds are required when conditions demand.

Question 2Road signs, signals and road markings

A circular sign with a red border shows a black car alongside a red car. What does this sign mean on a Gambian road?

  1. No overtaking by motor vehicles Correct answer.
  2. No entry for motor vehicles
  3. End of a dual carriageway
  4. Overtaking by any vehicle is prohibited

Explanation

The red border marks a prohibition, and the paired car symbols indicate that one motor vehicle may not pass another. The ban applies to overtaking manoeuvres by motor vehicles, including passing slower traffic. It does not close the road to vehicles, so you may still drive along it.

Question 3Road signs, signals and road markings

You approach a junction where the traffic lights are completely dark because of a power failure. A police officer is standing in the centre facing you with the right arm raised vertically. What should you do?

  1. Sound the horn and continue through slowly
  2. Stop and wait until the officer lowers the arm and signals you on Correct answer.
  3. Reverse away from the junction immediately
  4. Proceed because the lights are off and the junction is uncontrolled

Explanation

An officer's signals override traffic lights and road markings, and a raised arm facing your direction means stop. You remain stopped until the officer changes the signal and indicates that your stream may move. Proceeding on the assumption that a dark signal means free passage is dangerous.

Question 4Road signs, signals and road markings

A traffic light shows a steady red circle together with a green arrow pointing left. What does this combination permit?

  1. Proceed in the direction of the arrow after giving way where required Correct answer.
  2. Turn left only after the red light changes to amber
  3. Proceed straight ahead only
  4. Wait until the full green circle appears

Explanation

A green arrow authorises movement in the direction it points even while the main aspect remains red. Traffic going straight or right must still stop and wait for the main green. When turning under the arrow you must still yield to pedestrians and to traffic already in the road you are entering.

Question 5Road signs, signals and road markings

What does a flashing amber light at a pelican-type pedestrian crossing require a driver to do?

  1. Stop completely until the light turns green
  2. Speed up to clear the crossing before pedestrians step out
  3. Treat it exactly like a steady red light
  4. Proceed only if no pedestrian is on the crossing, giving way to anyone still crossing Correct answer.

Explanation

A flashing amber aspect means you may proceed but must give priority to pedestrians still on the crossing. It places the judgement on the driver rather than imposing an absolute stop. You should approach slowly enough to stop if someone is finishing their crossing.

Question 6Road signs, signals and road markings

You see a triangular sign with a red border containing a black symbol of a bend curving to the right. How should you respond?

  1. Expect a right-hand exit from a roundabout
  2. Expect the road to bend right ahead and adjust speed before reaching it Correct answer.
  3. Turn right at the next junction
  4. Prepare to overtake on the right

Explanation

Triangular signs with red borders are warnings, and a bend symbol shows the direction the road curves. The correct response is to reduce speed before the bend so you can stay in lane without harsh braking. Warning signs describe the road ahead, not a manoeuvre you must perform.

Question 7Road signs, signals and road markings

A triangular warning sign shows a black cross on a white background. What hazard does it announce?

  1. A crossroads junction ahead Correct answer.
  2. A railway level crossing without barriers
  3. A hospital ahead
  4. A church or place of worship ahead

Explanation

The cross symbol inside a red-bordered triangle warns of a crossroads where another road crosses yours. You should slow down and be ready to give way according to the markings and signs at the junction. It is not a religious or medical symbol on this type of sign.

Question 8Road signs, signals and road markings

On a two-lane road you see a broken white line running along the centre. What does this marking allow?

  1. No overtaking under any circumstances
  2. Driving on the left-hand side of the line at all times
  3. Parking along the centre of the road
  4. Overtaking when it is safe and the road ahead is clear Correct answer.

Explanation

A broken white centre line separates opposing streams but permits crossing it to overtake when visibility and traffic conditions make the manoeuvre safe. You must complete the overtake and return before the line becomes solid. The marking is permissive, not compulsory.

Question 9Road signs, signals and road markings

You are following a double continuous white line along the centre of the road. A slow lorry ahead is moving at walking pace. What is the correct action?

  1. Stay behind the lorry and wait until the double line ends and overtaking is permitted Correct answer.
  2. Cross the double line to pass because the lorry is very slow
  3. Overtake by driving on the left-hand shoulder
  4. Flash your headlights until the lorry pulls over

Explanation

Double continuous centre lines forbid crossing them to overtake, and the slow speed of the vehicle ahead does not create an exception. You should hold a safe following distance and wait for a broken line or a clear authorised stretch. Impatience is a common cause of head-on collisions on such roads.

Question 10Road signs, signals and road markings

A blue circular sign shows a white arrow pointing straight ahead. What does this sign tell you?

  1. You must proceed straight ahead only Correct answer.
  2. Straight ahead is recommended but optional
  3. A one-way street begins ahead
  4. Straight ahead is closed to traffic

Explanation

Blue circles give mandatory instructions, so the arrow means you must travel in the direction shown. Other movements at that point are not permitted. This differs from a warning triangle, which merely alerts you to a feature ahead.

Question 11Road signs, signals and road markings

You see a red circle containing a white horizontal bar at the entrance to a road. What does it mean?

  1. Road closed to pedestrians only
  2. Give way to oncoming traffic
  3. No entry for vehicular traffic Correct answer.
  4. No parking at any time

Explanation

The red circle with a white bar is the no-entry sign, meaning vehicles must not enter that road. It is often placed at the exit of a one-way street to prevent wrong-way driving. Entering anyway puts you in direct conflict with traffic coming towards you.

Question 12Road signs, signals and road markings

Approaching a junction, you see a road marking of a broad white line across your lane paired with an inverted triangle sign. What is required?

  1. Give way to traffic on the main road and stop only if necessary Correct answer.
  2. Sound the horn and continue without slowing
  3. Accelerate to merge ahead of main-road traffic
  4. Stop completely before the line in all cases

Explanation

The inverted triangle and the associated transverse marking indicate a give-way junction. You must let traffic on the priority road pass, stopping only if the way is not clear. A full stop is compulsory only where a stop sign and solid stop line are present.

Question 13Road signs, signals and road markings

A rectangular blue sign shows a white letter P. What does it indicate?

  1. A pedestrian zone begins
  2. Parking is permitted in the marked area Correct answer.
  3. A passing place is provided
  4. A police checkpoint is ahead

Explanation

The letter P on a blue rectangular sign marks a place where parking is allowed, usually subject to any plates or markings beneath it. Any supplementary plate stating times or restrictions must be read along with it. Parking outside those conditions can lead to a fine or removal of the vehicle.

Question 14Road signs, signals and road markings

You are driving at night and an oncoming vehicle's headlights are dazzling you. What is the safest response?

  1. Look towards the left edge of your lane and slow down until the vehicle has passed Correct answer.
  2. Move towards the centre line to make yourself more visible
  3. Switch your own headlights to main beam to warn the other driver
  4. Close your eyes briefly until the glare passes

Explanation

Looking towards the left edge of the road keeps you aligned without staring into the glare. Reducing speed shortens the distance you travel while your vision is impaired. Retaliating with main beam increases the risk for both drivers.

Question 15Road signs, signals and road markings

What is the meaning of a yellow box junction marking painted on the carriageway?

  1. You may enter only if your exit is clear, apart from when turning right and blocked by oncoming traffic Correct answer.
  2. You must always keep the box free by reversing out of it
  3. You may park inside the box for short deliveries
  4. You must stop inside the box whenever the lights are red

Explanation

The yellow criss-cross box is designed to keep the junction clear, so you should not enter unless you can clear it. The recognised exception is a right turn blocked by oncoming traffic or other vehicles waiting to turn. Stopping inside the box otherwise obstructs cross traffic.

Question 16Road signs, signals and road markings

A driver approaches a roundabout and sees a sign showing three arrows in a circle. How should the driver normally proceed?

  1. Travel anticlockwise around the island
  2. Stop at the entry line and wait for a green light
  3. Give way to traffic already on the roundabout and travel clockwise around the island Correct answer.
  4. Keep left of the central island and turn right immediately

Explanation

In The Gambia traffic keeps to the right, so roundabouts are negotiated in a clockwise direction around the central island. You give way to traffic already circulating and to the right where markings require it. Entering without yielding causes sideswipes and blockages.

Question 17Road signs, signals and road markings

A triangular sign shows a picture of a hump-backed bridge. What should the driver expect and do?

  1. A bridge that is closed to heavy vehicles
  2. A steep upward slope with a crest that limits forward visibility, so slow down Correct answer.
  3. A toll point where payment is required
  4. A ford where water crosses the road

Explanation

The hump-backed bridge warning alerts you to a sharp rise and crest that hides the road beyond. You should reduce speed so you can stop within the distance you can see. Approaching too fast risks losing control or meeting oncoming traffic hidden by the crest.

Question 18Road signs, signals and road markings

You are waiting at a red light and it changes to amber. What does the amber aspect require?

  1. Sound the horn and proceed immediately
  2. Continue at the same speed without checking
  3. Reverse behind the stop line
  4. Stop, unless you have already crossed the stop line or are so close that stopping would be unsafe Correct answer.

Explanation

Amber warns that the signal is about to turn red, so you should stop if you can do so safely. If you have already crossed the line or are too close to stop without harsh braking, you continue. Accelerating to beat the red endangers pedestrians and cross traffic.

Question 19Road signs, signals and road markings

What does a continuous yellow line running along the edge of the carriageway indicate?

  1. A cycle lane begins at the line
  2. The road is one-way in the direction of travel
  3. Overtaking is permitted at all times
  4. Parking and waiting are prohibited along that stretch Correct answer.

Explanation

A continuous yellow edge line marks a restriction on waiting or parking along that length of road. The restriction keeps the edge clear for visibility and for access. A broken yellow line usually permits limited waiting subject to any signs.

Question 20Road signs, signals and road markings

A circular sign with a red border shows a pedestrian inside a diagonal red bar. What does it mean?

  1. No pedestrians are allowed beyond the sign Correct answer.
  2. Pedestrians must use the footway on the left
  3. A pedestrian crossing is ahead
  4. Pedestrians have priority over vehicles

Explanation

The red border and diagonal bar create a prohibition, and the pedestrian symbol identifies who is excluded. The sign therefore bars pedestrians from the road or area beyond it, often used on fast roads or tunnels. It does not indicate a crossing or confer priority.

Question 21Road signs, signals and road markings

You see a sign showing a red-bordered triangle with a black symbol of two children running. What does it warn of?

  1. A play street closed to all traffic
  2. A bus stop serving school services
  3. A school or playground nearby, so children may be in the road Correct answer.
  4. A pedestrian zone where vehicles are banned

Explanation

The children symbol inside a warning triangle alerts you to a school, playground or area where children are likely to cross. You should reduce speed and be ready to stop suddenly, since children may run out without looking. The sign warns of a hazard rather than closing the road.

Question 22Road signs, signals and road markings

At a junction controlled by traffic lights, the signals fail and no officer is present. How should you treat the junction?

  1. As an uncontrolled junction, giving way to traffic on the right and proceeding only when clear Correct answer.
  2. As closed, and wait until repairs are completed
  3. As a priority road where you may proceed without checking
  4. As a four-way stop where the first vehicle to arrive always goes first regardless of position

Explanation

When signals fail and no officer is directing traffic, the junction reverts to the ordinary right-of-way rules. In The Gambia you give way to traffic approaching from the right and enter only when it is safe. Treating a dark signal as permission to continue is a frequent cause of collisions.

Question 23Road signs, signals and road markings

A rectangular sign shows a white bicycle on a blue background. What does it indicate?

  1. A cycle repair facility ahead
  2. A route or lane designated for cyclists Correct answer.
  3. Cyclists are prohibited from the route
  4. Cyclists must give way to all traffic

Explanation

A blue rectangular sign with a bicycle marks a route or lane intended for cyclists. Drivers should expect cyclists there and avoid encroaching on the marked lane. A prohibition would instead use a red circle with a diagonal bar.

Question 24Road signs, signals and road markings

You are about to overtake a cyclist on a road with a broken white centre line. Which action is correct?

  1. Overtake on the cyclist's left-hand side
  2. Sound the horn continuously while passing
  3. Leave a generous lateral clearance and pass only when you can see the road ahead is clear Correct answer.
  4. Pass closely so the manoeuvre is completed quickly

Explanation

Overtaking a cyclist requires enough space to avoid unsettling or clipping them, and enough visible road to complete the move safely. A broken centre line permits crossing only when the way ahead is clear. Passing closely at speed can cause the cyclist to lose balance.

Question 25Road signs, signals and road markings

What is the purpose of a stop line painted as a solid white bar across your lane at a junction?

  1. To show where pedestrians should cross
  2. To show where you must stop when required by the accompanying sign or signal Correct answer.
  3. To mark a place where parking is allowed
  4. To indicate the edge of a bus lane

Explanation

A solid white stop line marks the point beyond which you must not proceed when a stop sign or red signal requires you to halt. It keeps the junction clear and protects cross traffic and pedestrians. The line works together with the sign or signal, not on its own.

Question 26Road signs, signals and road markings

A circular sign has a red border and shows a black car beside a black motorcycle inside the circle. What does this sign tell you?

  1. Motorcycles are prohibited from proceeding past this sign
  2. Motor vehicles of all kinds are prohibited from proceeding past this sign Correct answer.
  3. No motor vehicles other than motorcycles are permitted beyond this point
  4. Motorcycles and cars may use the road but must keep to separate lanes

Explanation

A red-bordered circle is a prohibition sign, and a red border with a vehicle symbol means that class of traffic must not proceed. When the symbol shows a car and a motorcycle together, the ban applies to motor vehicles generally, including both of those classes. The sign marks the point beyond which the prohibition takes effect.

Question 27Road signs, signals and road markings

You approach a junction where the traffic lights are working but a police officer is standing in the road signalling you to stop. What should you do?

  1. Continue if the light is green for your direction
  2. Stop only if the officer steps into your lane
  3. Stop, because the officer's signal overrides the light Correct answer.
  4. Sound the horn and proceed slowly past the officer

Explanation

Directions given by a police officer on point duty take priority over traffic lights, signs and road markings. Even with a green aspect showing, you must obey the officer and halt. Proceeding against an officer's signal is an offence and creates a collision risk at the junction.

Question 28Road signs, signals and road markings

A warning sign shows a black symbol of a traffic light on a triangular white background with a red border. What does it warn you about?

  1. A place where the lights are permanently switched off
  2. Traffic lights ahead that may be hidden until you are close Correct answer.
  3. A pedestrian crossing controlled by lights further along the road
  4. A junction where you must give way to the right

Explanation

The triangular red-bordered sign is a warning sign, and the traffic-light symbol warns of signals ahead. Such signs are placed where the lights may not be visible in time, so the driver should be ready to slow and respond. The sign does not change the meaning of the lights themselves.

Question 29Road signs, signals and road markings

You are driving and see a circular blue sign showing a white arrow curving to the left. What does this sign require?

  1. You may turn left if it is safe but are not obliged to
  2. You must turn left ahead Correct answer.
  3. The road bends left with no change of direction required
  4. You must keep left of the obstruction or traffic island ahead

Explanation

A blue circle is a mandatory sign, so the white arrow gives a direction you are compelled to follow. An arrow curving left therefore means you must turn left at the point indicated. It is not advisory and it is not a warning of a bend.

Question 30Road signs, signals and road markings

A road has a broken white line along the left edge of the carriageway. What is the purpose of this marking?

  1. It shows where the hard shoulder begins for emergency use only
  2. It marks the boundary of a parking bay
  3. It separates the carriageway from a cycle lane
  4. It marks the edge of the carriageway so drivers can judge their position Correct answer.

Explanation

An edge line marks the limit of the carriageway and helps drivers keep their position, particularly in poor light or rain. A broken edge line is used where the edge is less critical or where lay-bys and entrances interrupt it. It is not a lane divider or a parking marking.

Question 31Road signs, signals and road markings

You are approaching a junction and see a broken white line of short marks across your lane, with a give-way sign beside the road. What does the broken line mean?

  1. Give way to traffic on the major road at the line Correct answer.
  2. The lane ahead is closed and you must merge
  3. Stop completely before the line in every case
  4. You have priority over traffic joining from the left

Explanation

A broken transverse line at a junction marks the give-way point, and it is paired with the give-way sign. You must slow, assess the traffic on the road you are joining and give way where necessary. A full stop is only compulsory where a solid stop line and stop sign are provided.

Question 32Road signs, signals and road markings

A rectangular sign shows a white symbol of a bus on a blue background. What does this sign indicate?

  1. A place where buses must give way to other traffic
  2. A bus station entrance where only buses may enter
  3. A lane or route reserved for buses Correct answer.
  4. A bus stop where all vehicles may park briefly

Explanation

A blue rectangular sign with a white vehicle symbol designates a facility for that class of traffic, here a bus lane or bus route. Other traffic must stay out of the reserved lane during the times shown, if times are given. The sign does not create a parking permission.

Question 33Road signs, signals and road markings

You see a triangular sign with a red border containing a black symbol of a tractor. What should you expect?

  1. A prohibition on agricultural vehicles using this road
  2. Slow-moving agricultural vehicles on or crossing the road ahead Correct answer.
  3. A farm entrance where you have priority
  4. A lay-by reserved for agricultural machinery

Explanation

A red-bordered triangle warns of a hazard ahead, and the tractor symbol warns of slow-moving agricultural vehicles. Such vehicles often emerge from field entrances or move between farms, so be ready to slow and overtake only when safe. It is a warning, not a prohibition.

Question 34Road signs, signals and road markings

You are driving behind a slow vehicle on a road where the centre line is a single broken white line. What does the marking permit?

  1. Overtaking on either side regardless of oncoming traffic
  2. No overtaking at any time
  3. Overtaking only if you can see the road ahead is clear and it is safe Correct answer.
  4. Overtaking only when the vehicle ahead signals you to pass

Explanation

A broken white centre line means you may cross it to overtake when it is safe to do so. The marking permits but never requires overtaking, so you must still judge sight lines, oncoming traffic and speed. The driver ahead cannot waive your duty to ensure the manoeuvre is safe.

Question 35Road signs, signals and road markings

What does a double continuous yellow line along the edge of the carriageway mean?

  1. Loading is permitted at all times
  2. Waiting is prohibited only during the hours shown on a nearby plate
  3. Waiting, loading and parking are prohibited at all times Correct answer.
  4. Parking is allowed for up to fifteen minutes

Explanation

A double yellow line along the edge of the carriageway imposes a continuous restriction on waiting, loading and parking. Because no times are attached, the restriction applies at all times, including nights and weekends. A single yellow line, by contrast, applies only during the times shown on the accompanying plate.

Question 36Road signs, signals and road markings

You are driving and see a sign showing a red-bordered circle with a black and white symbol of two arrows, one pointing up and one pointing down. What does this sign mean?

  1. Two-way traffic crosses the road ahead
  2. Two-way traffic resumes ahead after a one-way section Correct answer.
  3. No entry for vehicles travelling in either direction
  4. Priority must be given to oncoming traffic over a narrow section

Explanation

The red circle makes this a regulatory sign, and the opposing arrows warn that two-way traffic operates on the road ahead. It is typically placed where a one-way street ends and traffic begins to flow in both directions. Drivers must move to the correct side and expect oncoming vehicles.

Question 37Road signs, signals and road markings

A traffic light shows a green arrow pointing left while the main aspect is red. What does this allow?

  1. Proceed in the direction of the arrow if the way is clear Correct answer.
  2. Wait until the main light turns green before moving
  3. Proceed straight ahead as well as turning left
  4. Turn left only after giving way to traffic behind you

Explanation

A green arrow authorises movement only in the direction it points, and only if the way is clear. The red main aspect continues to prohibit movement in all other directions. You do not need to wait for the main light to change before following the arrow.

Question 38Road signs, signals and road markings

You are on a road where the lane is marked with a white diamond symbol painted on the surface. What does this marking indicate?

  1. A lane reserved for high-occupancy vehicles at peak times Correct answer.
  2. A bus stop clearway where stopping is prohibited
  3. A speed hump ahead that must be crossed slowly
  4. A pedestrian crossing is about to begin

Explanation

A diamond symbol painted in a traffic lane marks a reserved lane, commonly for buses or high-occupancy vehicles, during the times shown on accompanying signs. Other drivers should leave the lane before the restriction begins. The symbol is not a warning of a physical feature such as a hump or crossing.

Question 39Road signs, signals and road markings

What is the meaning of a white diagonal stripe area bounded by solid white lines in the middle of the carriageway?

  1. A parking area for motorcycles only
  2. A lane where vehicles may queue at a junction
  3. A hatched area that vehicles should not enter except in an emergency Correct answer.
  4. An area where vehicles may stop to load goods

Explanation

Hatched areas bounded by solid white lines separate traffic streams and should not be entered except in an emergency. Where the boundary is broken, you may enter only if it is safe and necessary. The area is not a lane, a loading bay or a parking place.

Question 40Road signs, signals and road markings

A driver sees a red-bordered triangle showing a black symbol of a gate or level crossing barrier. What does this warn of, and what should the driver do?

  1. A tunnel entrance ahead; switch on headlights
  2. A level crossing with a barrier ahead; be ready to stop if the barrier or lights indicate Correct answer.
  3. A cattle grid ahead; reduce speed and cross without braking
  4. A toll booth ahead; stop and pay before continuing

Explanation

The triangular warning sign with a gate symbol warns of a level crossing equipped with barriers. The driver should reduce speed, be prepared to stop and never enter the crossing while the barrier is down or the lights are showing. Ignoring the warning risks a collision with a train.

Question 41Road signs, signals and road markings

On a road with a continuous white line on your side of the centre and a broken line on the other side, what does the marking mean for you?

  1. You must not cross the line, though traffic coming the other way may Correct answer.
  2. You may cross the line to overtake when it is safe
  3. The line marks the edge of a bus lane
  4. The line applies only to heavy goods vehicles

Explanation

Where the centre marking combines a continuous line with a broken line, the line nearest you governs your movement. A continuous line on your side means you must not cross or straddle it, while traffic on the other side may cross when it is safe. The restriction is not limited to particular vehicle classes.

Question 42Road signs, signals and road markings

What does a circular sign with a red border containing a black symbol of a horn with a diagonal red bar mean?

  1. Sound the horn to warn others of your approach
  2. Only emergency vehicles may sound a horn here
  3. The horn must not be used beyond this point Correct answer.
  4. The horn may be used only in daylight

Explanation

A red-bordered circle with a diagonal bar is a prohibition sign, so the horn symbol with a bar bans the use of the horn from that point. Such signs are placed near hospitals, schools and other noise-sensitive areas. The ban applies to all vehicles, not only to some classes.

Question 43Road signs, signals and road markings

You are approaching a junction where a yellow box marking covers the carriageway. The exit beyond the box is blocked by stationary traffic. What should you do?

  1. Enter the box and wait behind the traffic already there
  2. Enter the box only if you are turning right
  3. Wait before the box until you can clear it completely Correct answer.
  4. Sound the horn and edge into the box to claim space

Explanation

A yellow box marking must not be entered unless your exit is clear and you can clear the box without stopping. If traffic beyond is stationary, you should wait before the box. Blocking the box obstructs cross traffic and is an offence.

Question 44Road signs, signals and road markings

A sign shows a red-bordered circle containing a black symbol of a pedestrian with a diagonal red bar. What does it mean for drivers?

  1. Pedestrians must not use the road beyond the sign Correct answer.
  2. Pedestrians have priority over vehicles at the crossing ahead
  3. A pedestrian zone begins where vehicles must give way
  4. Pedestrians are prohibited from crossing here and should be directed elsewhere

Explanation

The red-bordered circle with a diagonal bar is a prohibition, and the pedestrian symbol means pedestrians may not proceed beyond the sign. The restriction is placed where pedestrian access is unsafe, such as the approach to a tunnel or a restricted carriageway. Drivers should still take care, since pedestrians may not have noticed the sign.

Question 45Rules of the road and right-of-way

On a two-way road in The Gambia with no centre markings, which side must you keep to when driving?

  1. Whichever side has less traffic
  2. The left side of the road Correct answer.
  3. The right side of the road
  4. The centre of the road

Explanation

The Gambia is a left-hand traffic country, so a driver keeps to the left half of the carriageway. Where no centre line is painted, you must still judge your position so oncoming traffic passes on your right.

Question 46Rules of the road and right-of-way

You are approaching a roundabout and intend to take the second exit (straight ahead). Which lane and signal should you use?

  1. Right lane, signalling left as you enter
  2. Left lane without a signal on approach, then signal left after passing the exit before yours Correct answer.
  3. Left lane, signalling left throughout
  4. Right lane, signalling right on approach

Explanation

For a straight-ahead exit you normally approach in the left lane with no signal, because you are not turning off before then. Once you pass the exit before the one you want, you signal left to show you are leaving.

Question 47Rules of the road and right-of-way

At an unmarked crossroads where two vehicles arrive at the same time, how is priority decided?

  1. The vehicle on the left gives way to the vehicle on the right Correct answer.
  2. The faster vehicle proceeds first
  3. The vehicle that sounds its horn first goes
  4. The larger vehicle always goes first

Explanation

Where no signs or markings give priority, the general rule is that a driver gives way to traffic approaching from the right. This avoids deadlock when two vehicles reach the junction together.

Question 48Rules of the road and right-of-way

A pedestrian has stepped onto a zebra crossing ahead of you. What must you do?

  1. Continue at the same speed if you have right of way
  2. Sound your horn so the pedestrian hurries
  3. Steer around the pedestrian if the road is clear
  4. Stop and give way to the pedestrian Correct answer.

Explanation

At a zebra crossing, once a pedestrian has set foot on the crossing you must stop and let them cross. You should also be ready to stop for anyone waiting to step onto it.

Question 49Rules of the road and right-of-way

You are following a vehicle and want to overtake on a single-carriageway road. Which condition makes overtaking unsafe?

  1. A long straight stretch with clear visibility ahead
  2. A clear road with an overtaking lane marked ahead
  3. A solid white line along the centre of the road on your side Correct answer.
  4. A broken white centre line with no oncoming traffic

Explanation

A continuous white line on your side of the centre means you must not cross it, so overtaking is prohibited there. Broken lines permit crossing when it is safe, and a clear straight road is normally suitable.

Question 50Rules of the road and right-of-way

What does a flashing amber light at a pelican-style signalised crossing mean for drivers?

  1. Proceed only if the crossing is completely empty of pedestrians
  2. Reverse away from the crossing
  3. Give way to any pedestrian still on the crossing, otherwise proceed Correct answer.
  4. Stop and wait until the light turns green

Explanation

The flashing amber phase means pedestrians already on the crossing have priority, but if the crossing is clear you may drive on. It is a give-way phase rather than an absolute stop.