I85PREP
⌘ K
HPE ASE Compute Solutions study materials
HPE ASE Compute Solutions study resources

HPE ASE Compute Solutions practice questions

One question at a time. Build your HPE ASE Compute Solutions understanding.

First 50 of 190 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1HPE compute requirements, platform selection and supported configurations

A customer needs a dense, general-purpose 1U rack server for virtualization that supports two 5th Gen Intel Xeon Scalable processors. Which HPE ProLiant Gen11 model is the best fit?

  1. HPE ProLiant ML110 Gen11
  2. HPE ProLiant MicroServer Gen11
  3. HPE ProLiant DL360 Gen11 Correct answer.
  4. HPE Apollo 6500 Gen10 Plus

Explanation

The HPE ProLiant DL360 Gen11 is a 1U, dual-socket rack server supporting two Intel Xeon Scalable processors, making it the standard choice for dense general-purpose virtualization. Its 1U density maximizes rack efficiency for compute-intensive consolidation.

Question 2HPE compute requirements, platform selection and supported configurations

Which HPE ProLiant Gen11 server is a 2U, dual-socket workhorse positioned as the most versatile and widely deployed enterprise rack server for mixed workloads?

  1. HPE ProLiant DL20 Gen11
  2. HPE ProLiant DL380 Gen11 Correct answer.
  3. HPE ProLiant MicroServer Gen11
  4. HPE Superdome Flex 280

Explanation

The HPE ProLiant DL380 Gen11 is the flagship 2U, dual-socket general-purpose rack server, offering broad expansion for storage, GPUs, and I/O. It is the most widely deployed ProLiant model for mixed enterprise workloads.

Question 3HPE compute requirements, platform selection and supported configurations

A customer requires a composable infrastructure platform where compute, storage, and fabric are software-defined and managed as fluid resource pools. Which HPE platform should you recommend?

  1. HPE Apollo 4200
  2. HPE ProLiant ML350 Gen11
  3. HPE MicroServer Gen11
  4. HPE Synergy Correct answer.

Explanation

HPE Synergy is HPE's composable infrastructure platform, treating compute, storage, and fabric as fluid pools of resources that are programmatically composed via HPE OneView (the Synergy Composer). This matches the requirement for software-defined, composable resource pools.

Question 4HPE compute requirements, platform selection and supported configurations

Which HPE platform is purpose-built for large-scale HPC and AI clusters, offering density-optimized compute and GPU-rich nodes?

  1. HPE MicroServer Gen11
  2. HPE Apollo systems Correct answer.
  3. HPE ProLiant DL20 Gen11
  4. HPE Synergy 480 compute module

Explanation

HPE Apollo systems are purpose-built for high-performance computing (HPC) and AI workloads, providing density-optimized chassis and GPU-rich configurations (such as the Apollo 6500) for large parallel and accelerated workloads.

Question 5HPE compute requirements, platform selection and supported configurations

A customer runs a single, very large in-memory database (such as SAP HANA) requiring massive scale-up with many sockets and terabytes of shared memory. Which HPE platform fits best?

  1. HPE ProLiant DL360 Gen11
  2. HPE MicroServer Gen11
  3. HPE Superdome Flex Correct answer.
  4. HPE Apollo 2000

Explanation

HPE Superdome Flex is a modular, scale-up mission-critical platform that grows to many sockets and tens of terabytes of shared memory in a single system image, making it ideal for very large in-memory databases like SAP HANA.

Question 6HPE compute requirements, platform selection and supported configurations

Within HPE Synergy, which management appliance hosts and serves bootable OS/application images to enable stateless, image-based deployment of compute modules?

  1. HPE Synergy Composer
  2. HPE Virtual Connect SE
  3. HPE iLO Amplifier Pack
  4. HPE Synergy Image Streamer Correct answer.

Explanation

HPE Synergy Image Streamer is the management appliance that stores golden OS/application images and serves them over the fabric to compute modules, enabling fast, stateless, image-based provisioning that integrates with OneView server profiles.

Question 7HPE compute requirements, platform selection and supported configurations

Which appliance hosts HPE OneView and acts as the management brain that composes compute, storage, and fabric within an HPE Synergy frame group?

  1. HPE Synergy Composer Correct answer.
  2. HPE Synergy Image Streamer
  3. HPE OneView Global Dashboard
  4. HPE Frame Link Module

Explanation

The HPE Synergy Composer is the appliance that runs HPE OneView and serves as the management engine, composing and managing compute, storage, and fabric resources across a Synergy frame group through software-defined templates.

Question 8HPE compute requirements, platform selection and supported configurations

Which HPE storage controller family provides hardware RAID with the modern MR (Megaraid-based) stack used in many ProLiant Gen11 configurations?

  1. HPE Smart Array / HPE MR controllers Correct answer.
  2. HPE Virtual Connect modules
  3. HPE Aruba CX switches
  4. HPE Frame Link Modules

Explanation

HPE offers Smart Array (SR) controllers and the newer MR-series controllers (based on the Broadcom MegaRAID stack) for hardware RAID in ProLiant Gen11 servers. Selecting SR vs MR depends on feature, performance, and management-tool requirements.

Question 9HPE compute requirements, platform selection and supported configurations

A customer needs a single-socket tower server suitable for a small remote office, supporting quiet operation and a few internal drives. Which HPE ProLiant Gen11 model is most appropriate?

  1. HPE ProLiant ML30 Gen11 Correct answer.
  2. HPE ProLiant DL380 Gen11
  3. HPE Apollo 6500
  4. HPE Superdome Flex 280

Explanation

The HPE ProLiant ML30 Gen11 is an entry-level single-socket tower server designed for small/remote offices, offering quiet operation and internal drive capacity for SMB workloads without rack infrastructure.

Question 10HPE compute requirements, platform selection and supported configurations

Which HPE platform extends OneView-class composability/management to traditional rack ProLiant servers and modern storage, often discussed alongside HPE Alletra compute/storage modernization?

  1. HPE MicroServer Gen11 only
  2. HPE Smart Storage Battery
  3. HPE OneView with HPE Alletra integration Correct answer.
  4. HPE Frame Link Module

Explanation

HPE OneView manages a broad portfolio including ProLiant, Synergy, Apollo, Superdome Flex, and HPE Alletra storage. Integrating OneView with Alletra brings unified, software-defined lifecycle management across modern compute and storage.

Question 11HPE compute requirements, platform selection and supported configurations

In HPE Synergy, which component provides the composable, software-defined network fabric that interconnects compute modules and uplinks across frames?

  1. HPE Smart Array controller
  2. HPE InfoSight
  3. HPE Virtual Connect SE Correct answer.
  4. HPE Intelligent Provisioning

Explanation

HPE Virtual Connect SE provides the composable, software-defined fabric in HPE Synergy, abstracting and provisioning network connectivity to compute modules and managing uplinks across a frame group through OneView server profiles.

Question 12HPE compute requirements, platform selection and supported configurations

A customer plans to host many independent, density-optimized compute nodes for hyperscale-style scale-out in a shared chassis. Which HPE platform fits this multi-node, shared-infrastructure design?

  1. HPE Superdome Flex (single system image)
  2. HPE Apollo 2000 system Correct answer.
  3. HPE MicroServer Gen11
  4. HPE ProLiant ML30 Gen11

Explanation

The HPE Apollo 2000 system packs multiple independent ProLiant-class server nodes into a shared 2U chassis with shared power/cooling, delivering density-optimized scale-out for distributed workloads. Each node operates independently, matching the multi-node design.

Question 13HPE iLO, fleet management and controlled lifecycle operations

Which embedded management controller is integrated into HPE ProLiant Gen11 servers to provide remote console, virtual media, power control, and out-of-band lifecycle management?

  1. HPE OneView
  2. HPE iLO 6 Correct answer.
  3. HPE InfoSight
  4. HPE Intelligent Provisioning

Explanation

iLO6 is the embedded out-of-band management controller in the stated ProLiant Gen11 example. It provides relevant management functions independently of the host OS under actual firmware, licensing and connectivity conditions. Not every remote console/media feature is universally included at every license level, and controller reachability does not prove application health.

Question 14HPE iLO, fleet management and controlled lifecycle operations

What HPE security technology anchors server firmware integrity in immutable silicon, validating firmware against a fingerprint burned into the iLO chip to protect against firmware-level attacks?

  1. Secure Boot
  2. Silicon Root of Trust Correct answer.
  3. TPM 2.0
  4. UEFI Shell

Explanation

HPE Silicon Root of Trust anchors a cryptographic fingerprint of authentic firmware directly into the iLO silicon during manufacturing. At every boot it validates essential firmware against this immutable hardware anchor, preventing compromised or malicious firmware from running.

Question 15HPE iLO, fleet management and controlled lifecycle operations

Which iLO 6 licensing tier is required to use the integrated remote console (text and graphical), virtual media, and remote console multi-user collaboration for ongoing remote administration?

  1. iLO Advanced Correct answer.
  2. iLO Standard (no license)
  3. iLO Essentials only
  4. iLO 6 requires no license for any feature

Explanation

The full integrated remote console (graphical), virtual media, and advanced collaboration features require an iLO Advanced license. iLO Standard provides basic management, but the rich remote console/virtual media capabilities are unlocked with iLO Advanced.

Question 16HPE iLO, fleet management and controlled lifecycle operations

A customer wants to enforce that only HPE-signed, authentic firmware can run and to detect any firmware that has been altered. Beyond Silicon Root of Trust, which complementary iLO security capability continuously checks firmware against known-good values?

  1. RAID 5 parity scrubbing
  2. iLO Standard licensing
  3. USB boot ordering
  4. Runtime firmware verification / firmware consistency detection Correct answer.

Explanation

HPE servers add runtime firmware verification (firmware consistency/integrity detection) that periodically validates firmware against known-good measurements while the system runs, complementing the boot-time Silicon Root of Trust to catch tampering and automatically support recovery to authentic firmware.

Question 17HPE iLO, fleet management and controlled lifecycle operations

A customer requires that ProLiant servers boot only trusted, signed bootloaders/OS components to defend against bootkits. Which feature should be enabled in UEFI?

  1. Legacy BIOS boot mode
  2. Wake-on-LAN
  3. Fast Boot only
  4. Secure Boot Correct answer.

Explanation

Secure Boot, configured in the UEFI System Utilities, validates the digital signatures of bootloaders and OS boot components against trusted keys, preventing unsigned or tampered code from loading and defending against bootkit/rootkit attacks at boot.

Question 18HPE iLO, fleet management and controlled lifecycle operations

Which standards-based component on ProLiant Gen11 servers stores cryptographic keys and platform integrity measurements to support features like measured boot and disk encryption key protection?

  1. Smart Storage Battery
  2. Frame Link Module
  3. Trusted Platform Module (TPM 2.0) Correct answer.
  4. Virtual Connect SE

Explanation

The Trusted Platform Module (TPM 2.0) is a dedicated security chip that stores cryptographic keys and platform configuration measurements, underpinning measured boot, attestation, and protection of disk-encryption keys (e.g., for BitLocker) on Gen11 servers.

Question 19HPE iLO, fleet management and controlled lifecycle operations

A customer wants iLO accounts and access to be governed by the corporate identity system rather than local iLO accounts. Which iLO capability supports this?

  1. Disabling all authentication
  2. Using only the default admin password
  3. Removing the iLO entirely
  4. Directory services / authentication integration (e.g., LDAP/Active Directory) Correct answer.

Explanation

iLO supports directory-based authentication (LDAP/Active Directory, including schema-free directory groups), letting organizations centrally govern iLO access and roles through the corporate identity system instead of managing many local iLO accounts.

Question 20HPE iLO, fleet management and controlled lifecycle operations

Which HPE feature provides automated firmware/configuration recovery if the active firmware is found to be corrupted or compromised on a ProLiant server?

  1. Replacing the chassis fans
  2. Firmware recovery to a last-known-good/authentic image (part of HPE firmware integrity protection) Correct answer.
  3. Increasing DIMM voltage
  4. Switching to legacy BIOS

Explanation

As part of HPE's firmware integrity protection, the server can automatically recover compromised or corrupted firmware to a last-known-good/authentic image, restoring a trusted state without manual reflashing in many cases.

Question 21HPE iLO, fleet management and controlled lifecycle operations

An administrator wants to deploy and configure an HPE ProLiant Gen11 server, including installing a supported OS, directly from the embedded environment without external media. Which embedded tool provides this guided deployment?

  1. HPE OneView
  2. HPE Smart Update Manager
  3. HPE Intelligent Provisioning Correct answer.
  4. HPE iLO Amplifier Pack

Explanation

Intelligent Provisioning provides a supported embedded guided deployment environment for the stated server. Actual operating-system source, drivers, network access and compatibility prerequisites still matter; an embedded tool does not mean that every OS installation needs no external source or preparation. No server is provisioned here.

Question 22HPE iLO, fleet management and controlled lifecycle operations

What is the HPE Service Pack for ProLiant (SPP)?

  1. A cloud subscription for support contracts
  2. A comprehensive, tested bundle of firmware, drivers, and system software for ProLiant servers Correct answer.
  3. A hardware RAID controller card
  4. A licensing key for iLO Advanced features

Explanation

The HPE Service Pack for ProLiant (SPP) is a single, comprehensive bundle of firmware, drivers, and system software components that have been tested together as a baseline. It is deployed using Smart Update Manager (SUM) to keep servers at a consistent, supported revision level.

Question 23HPE iLO, fleet management and controlled lifecycle operations

A scripting team wants to automate iLO and server configuration using a standards-based REST API. Which interface should they target on HPE Gen11 servers?

  1. IPMI 1.5 over LAN
  2. The Redfish-based iLO RESTful API Correct answer.
  3. SNMP v1 traps
  4. The legacy serial-over-LAN only

Explanation

HPE iLO implements the DMTF Redfish standard, exposing a modern RESTful API (accessible via tools such as the iLO RESTful Interface Tool / iLOREST). This is the recommended, standards-based way to automate server and iLO configuration on Gen11.

Question 24HPE iLO, fleet management and controlled lifecycle operations

A customer requires the highest read/write data protection for a small set of critical drives, accepting 50% usable capacity for full mirroring. Which RAID level should you configure on the HPE array controller?

  1. RAID 1 Correct answer.
  2. RAID 0
  3. RAID 5
  4. RAID 6

Explanation

RAID 1 (mirroring) writes identical data to two drives, providing strong redundancy and good read performance at the cost of 50% usable capacity. This matches the requirement for full mirroring on a small critical drive set.

Question 25HPE iLO, fleet management and controlled lifecycle operations

An administrator wants to script firmware and BIOS configuration across many servers from a single management point and integrate with the SPP. Which HPE tool provides this scriptable, large-scale update orchestration?

  1. HPE Smart Update Manager (SUM) Correct answer.
  2. HPE Smart Storage Administrator (SSA)
  3. HPE Synergy Image Streamer
  4. HPE iLO virtual media

Explanation

HPE Smart Update Manager (SUM) deploys firmware, drivers, and software from the SPP and supports scripted/automated, large-scale updates across multiple servers, including baseline comparison and dependency handling.

Question 26HPE iLO, fleet management and controlled lifecycle operations

A customer needs to deploy identical configurations to 50 new ProLiant Gen11 servers efficiently. Beyond OneView server profile templates, which approach helps automate consistent provisioning at scale?

  1. Manually clicking through each server's setup
  2. Using scripted deployment via the iLO RESTful/Redfish API (e.g., iLOREST) combined with SPP/SUM and template-based configuration Correct answer.
  3. Reading each setting aloud to a colleague
  4. Configuring servers only after they fail

Explanation

At scale, automation is key: scripting configuration through the iLO RESTful (Redfish) API/iLOREST, applying firmware/drivers via SPP and SUM, and using template-based config (or OneView profiles) ensures consistent, repeatable provisioning of many servers efficiently.

Question 27HPE iLO, fleet management and controlled lifecycle operations

A solution requires bootable OS images to be applied to stateless Synergy compute modules so a module can be replaced and rebooted to the same OS without local install. Which Synergy capability enables this?

  1. Manually installing the OS from a USB stick on each module
  2. Image Streamer serving OS images referenced by the OneView server profile Correct answer.
  3. Smart Storage Battery caching
  4. Secure Boot key enrollment

Explanation

HPE Synergy Image Streamer serves golden OS images that are referenced in the OneView server profile. A stateless compute module boots its assigned image over the fabric, so a replacement module simply reuses the same profile/image without a local OS install.

Question 28HPE iLO, fleet management and controlled lifecycle operations

An administrator must verify correct operation of a newly deployed ProLiant Gen11 server after OS install. Which check best confirms the hardware and firmware are healthy before handover?

  1. Confirm the server has a clean IML/AHS status, all components show OK in iLO, and firmware matches the intended baseline Correct answer.
  2. Verify the server is the heaviest in the rack
  3. Count the number of screws used
  4. Check that the box it shipped in is recycled

Explanation

The keyed checks provide useful post-deployment hardware and baseline evidence. A clean hardware display or cleared log does not alone prove the OS/application, protection or every firmware function is correct. Preserve relevant event context and verify the actual intended service and supported configuration before handover.

Question 29HPE iLO, fleet management and controlled lifecycle operations

On supported identical HPE targets, which listed interface/tool can automate replication of supported BIOS, boot and iLO configuration settings, subject to each setting’s support and unique-value handling?

  1. Re-seating the bezel on each server
  2. Configuration capture/replication via the iLO RESTful API or RESTful Interface Tool (iLOREST) Correct answer.
  3. Adjusting the fan curve manually
  4. Painting the servers the same color

Explanation

The iLO RESTful/Redfish interface and supported iLOREST tooling can automate relevant configuration on supported targets. Not every setting, credential or unique identifier should be copied or is writable through one operation. Use compatible versions, required permissions, individual identity handling and verified results rather than promise a complete universal clone.

Question 30HPE iLO, fleet management and controlled lifecycle operations

A customer wants to ensure consistent BIOS settings (e.g., virtualization extensions, power profile) across newly deployed Gen11 hosts in the data center. Where are these settings configured on the server?

  1. In the UEFI System Utilities (BIOS/Platform Configuration) Correct answer.
  2. On the front-panel power button
  3. In the shipping manifest
  4. In the rack PDU display

Explanation

BIOS/platform settings such as Intel VT/AMD-V virtualization extensions, boot mode, and the power/workload profile are configured in the UEFI System Utilities (also applyable via OneView/Redfish). These determine hardware behavior for the OS and hypervisor.

Question 31HPE iLO, fleet management and controlled lifecycle operations

Which HPE deployment best practice helps ensure a new ProLiant Gen11 server boots in the intended firmware mode and with the correct controller before OS installation?

  1. Skip firmware updates and install the OS immediately
  2. Update to the validated SPP baseline, configure the storage controller/array and boot mode (UEFI), then install the OS Correct answer.
  3. Install the OS first, then never update firmware
  4. Randomly choose boot mode and hope it works

Explanation

Best practice is to bring the server to the validated SPP firmware baseline, configure the storage controller/logical drives and the correct (UEFI) boot mode, and then install the OS. Doing firmware and storage/boot setup first avoids reinstalls and ensures supported operation.

Question 32HPE iLO, fleet management and controlled lifecycle operations

Which best practice should an HPE ASE follow when deploying HPE ProLiant servers to maximize supportability and consistency across a customer environment?

  1. Standardize on tested SPP baselines and documented, repeatable configurations applied through templates/automation Correct answer.
  2. Deploy each server with a unique, ad-hoc firmware and BIOS configuration
  3. Avoid documentation to save time
  4. Use a different management tool on every server

Explanation

Standardizing on tested SPP baselines and documented, repeatable configurations (applied via OneView/COM templates or scripted automation) maximizes supportability, simplifies troubleshooting, and ensures consistency across the customer's ProLiant estate.

Question 33HPE iLO, fleet management and controlled lifecycle operations

Which HPE management platform provides software-defined, template-driven management of HPE Synergy, ProLiant, Apollo, and Superdome Flex through server profiles and a unified API?

  1. HPE InfoSight
  2. HPE iLO 6
  3. HPE OneView Correct answer.
  4. HPE Intelligent Provisioning

Explanation

OneView is the infrastructure-management platform associated with server profiles, templates and APIs in the stated supported environment. Actual supported hardware can have different monitored versus managed capabilities. Do not infer identical profile or lifecycle functions for every named family, model, firmware and OneView release.

Question 34HPE iLO, fleet management and controlled lifecycle operations

What HPE cloud-based service uses AI/ML across an installed base to deliver predictive analytics, automated case creation, and proactive support recommendations for HPE infrastructure?

  1. HPE Smart Update Manager
  2. HPE iLO Federation
  3. HPE RESTful Interface Tool
  4. HPE InfoSight Correct answer.

Explanation

HPE InfoSight is the cloud-based AI-driven analytics platform that learns from the global installed base to predict and prevent issues, automate support cases, and provide proactive recommendations for compute and storage infrastructure.

Question 35HPE iLO, fleet management and controlled lifecycle operations

A customer wants to consume HPE compute on a pay-per-use basis with on-premises infrastructure managed as-a-service. Which HPE offering addresses this?

  1. HPE Pointnext one-time installation
  2. HPE Care Pack warranty
  3. HPE GreenLake for Compute Correct answer.
  4. HPE Smart Buy promotion

Explanation

HPE GreenLake delivers on-premises infrastructure on a consumption (pay-per-use) basis as a managed cloud experience. HPE GreenLake for Compute lets customers consume ProLiant/compute capacity with metered billing and as-a-service operations.

Question 36HPE iLO, fleet management and controlled lifecycle operations

An administrator needs to push a complete firmware, driver, and BIOS configuration baseline to many ProLiant servers and ensure they stay consistent. Which approach best applies these baselines through HPE OneView?

  1. Assigning a firmware baseline within a server profile template Correct answer.
  2. Manually flashing each server with a USB key
  3. Editing each iLO REST endpoint individually
  4. Using Intelligent Provisioning on each server separately

Explanation

In HPE OneView, a firmware baseline (uploaded from an SPP into the OneView repository) is referenced in a server profile template. Applying the template enforces a consistent firmware/configuration baseline across all servers, and drift can be detected and remediated centrally.

Question 37HPE iLO, fleet management and controlled lifecycle operations

What is the primary benefit of using a server profile template (rather than individual server profiles) in HPE OneView?

  1. It eliminates the need for iLO firmware
  2. It enforces consistency and enables drift detection across many servers from one definition Correct answer.
  3. It doubles the network bandwidth of the servers
  4. It replaces the need for an operating system

Explanation

A server profile template defines configuration (firmware baseline, BIOS, connections, local storage, boot order) once. Profiles derived from it inherit the definition, so OneView can detect and flag drift from the template and re-apply settings, enforcing consistency at scale.

Question 38HPE iLO, fleet management and controlled lifecycle operations

A customer wants cloud-based, agentless lifecycle management of distributed HPE ProLiant Gen10/Gen11 servers across multiple sites, including firmware updates, onboarding, and monitoring from the GreenLake platform. Which service should you recommend?

  1. HPE Compute Ops Management Correct answer.
  2. HPE Intelligent Provisioning
  3. HPE Smart Storage Administrator
  4. HPE iLO 6 local console

Explanation

HPE Compute Ops Management (COM) is the cloud-native service on the HPE GreenLake platform for managing distributed ProLiant servers across sites, including onboarding, automated firmware updates, group-based policies, and monitoring from a single cloud console.

Question 39HPE iLO, fleet management and controlled lifecycle operations

When onboarding an HPE ProLiant Gen11 server into HPE Compute Ops Management, what connectivity is required from the server's management controller?

  1. The server iLO must have secure outbound connectivity to the HPE GreenLake cloud Correct answer.
  2. The host OS must run a heavyweight on-prem agent
  3. A dedicated fiber link to HPE InfoSight is mandatory
  4. The server must be physically shipped to an HPE data center

Explanation

Compute Ops Management is agentless and works through iLO. The server's iLO needs secure outbound HTTPS connectivity (directly or via a proxy/COM gateway) to the HPE GreenLake cloud so the server can be onboarded and managed without an OS-level agent.

Question 40HPE iLO, fleet management and controlled lifecycle operations

Before applying a new SPP firmware baseline to production ProLiant servers, what should the administrator verify to avoid compatibility issues?

  1. That the SPP version supports the server generation and that firmware/driver compatibility with the OS and hypervisor is confirmed Correct answer.
  2. That the office Wi-Fi password is correct
  3. That the server has the newest bezel installed
  4. That all USB ports are populated

Explanation

Before deploying an SPP, confirm the SPP supports the specific server generation and validate that the included firmware and driver versions are compatible with the running OS/hypervisor (and any clustered/storage dependencies). This prevents post-update incompatibility or downtime.

Question 41HPE iLO, fleet management and controlled lifecycle operations

A customer in a clustered environment is concerned about downtime when updating firmware on ProLiant hosts. Which deployment practice minimizes disruption?

  1. Update all hosts simultaneously during business hours
  2. Perform a rolling update: drain/evacuate workloads from one host at a time, update, verify, then proceed Correct answer.
  3. Disable the cluster and update offline only
  4. Skip firmware updates entirely to avoid risk

Explanation

A supported rolling process can reduce disruption by evacuating or draining one host, updating under an approved compatible baseline and verifying before proceeding. Available capacity, workload mobility, cluster behavior and dependencies must support it. Rolling does not guarantee zero downtime for every workload or update.

Question 42HPE iLO, fleet management and controlled lifecycle operations

Which HPE management capability lets a group of iLOs perform local group power management, license activation, and querying without a central management server?

  1. iLO Standard licensing
  2. Secure Boot
  3. Smart Storage Battery
  4. iLO Federation Correct answer.

Explanation

iLO Federation groups iLOs on the same network so administrators can perform group-wide tasks (group power control, firmware/license queries, aggregated status) directly from any member iLO, without requiring a separate central management appliance.

Question 43HPE iLO, fleet management and controlled lifecycle operations

An administrator must confirm whether a planned OS, driver, and firmware combination is supported together on a specific ProLiant Gen11 model. Which authoritative resource should be consulted?

  1. A random internet forum thread
  2. The server's bezel label
  3. HPE compatibility/support documentation such as the SPP/OS support matrices and QuickSpecs Correct answer.
  4. Guessing based on the model number

Explanation

HPE publishes authoritative compatibility resources, including SPP and OS support matrices and product QuickSpecs, that state which OS versions, drivers, and firmware are supported on a given server generation. These should be checked to validate a planned combination.

Question 44HPE iLO, fleet management and controlled lifecycle operations

A customer asks how HPE Compute Ops Management helps keep many servers compliant with a desired firmware level. Which COM capability addresses this?

  1. Manually labeling each server with a sticker
  2. Group-based firmware compliance policies that flag and remediate servers not at the target baseline Correct answer.
  3. Disabling firmware updates fleet-wide
  4. Printing firmware versions to paper

Explanation

HPE Compute Ops Management lets administrators define server groups with a target firmware baseline; COM continuously reports compliance, flags servers that have drifted, and can schedule remediation updates to bring them back into compliance from the cloud.

Question 45HPE iLO, fleet management and controlled lifecycle operations

Which statement BEST describes the role of HPE Compute Ops Management relative to HPE OneView for a customer with both standalone ProLiant servers and OneView-managed environments?

  1. COM and OneView cannot coexist
  2. OneView must be uninstalled before using COM
  3. COM only manages printers
  4. COM provides cloud-based management of distributed/standalone ProLiant servers, and a COM OneView Edition can connect existing OneView appliances for unified cloud reporting Correct answer.

Explanation

HPE Compute Ops Management delivers cloud-native management for distributed and standalone ProLiant servers, and the COM OneView Edition add-on connects existing OneView appliances to the GreenLake platform for centralized multi-site reporting and analytics, so both can coexist.

Question 46HPE iLO, fleet management and controlled lifecycle operations

A customer needs help understanding the impact of adding 20 new VMs to an existing virtualization cluster on ProLiant hosts. Which analysis should the ASE perform?

  1. Assume there is always enough capacity
  2. Add the VMs without checking and react to problems later
  3. Remove monitoring to avoid alerts
  4. Evaluate current host CPU/memory/storage/network headroom against the new VMs' projected resource demand to identify whether capacity must be added Correct answer.

Explanation

Assessing the change requires comparing the cluster's current CPU, memory, storage, and network headroom with the projected demand of the 20 new VMs. This determines whether existing capacity suffices or whether hosts/resources must be added to avoid contention.

Question 47HPE iLO, fleet management and controlled lifecycle operations

Which statement correctly describes the relationship between HPE GreenLake and HPE Compute Ops Management?

  1. GreenLake is a physical RAID controller embedded in COM
  2. COM replaces the need for the GreenLake platform entirely
  3. They are competing products from different vendors
  4. Compute Ops Management is delivered as a cloud service through the HPE GreenLake platform Correct answer.

Explanation

HPE Compute Ops Management is delivered as a cloud-native service through the HPE GreenLake platform. GreenLake provides the unified cloud experience and identity, while COM is the compute management service running on it.

Question 48HPE iLO, fleet management and controlled lifecycle operations

A customer wants to monitor health and receive proactive alerts for a small set of standalone ProLiant Gen11 servers without deploying OneView. Which approach is appropriate?

  1. Install OneView is the only option
  2. Manually check each server in person daily
  3. Use iLO 6 alerting (email/SNMP/Redfish events) and optionally onboard to HPE Compute Ops Management for cloud monitoring Correct answer.
  4. Disable all alerting

Explanation

For standalone servers, iLO 6 can send alerts via email, SNMP, or Redfish events, and the servers can optionally be onboarded to HPE Compute Ops Management for cloud-based monitoring and proactive notifications, without requiring a OneView appliance.

Question 49HPE iLO, fleet management and controlled lifecycle operations

An HPE ASE must recommend an HPE management strategy for a large enterprise with HPE Synergy, standalone ProLiant Gen11 rack servers across branch sites, and a new HPE Private Cloud AI environment. Which combination best fits?

  1. Use only iLO local console on every device individually
  2. Use HPE OneView (via Synergy Composer) for composable Synergy, HPE Compute Ops Management on GreenLake for distributed ProLiant fleet lifecycle, and the GreenLake-managed Private Cloud AI for the AI environment Correct answer.
  3. Manage everything with a single spreadsheet
  4. Avoid all HPE management tools and use generic third-party only

Explanation

A layered HPE strategy fits this mixed estate: OneView (run on the Synergy Composer) manages composable Synergy; HPE Compute Ops Management on GreenLake handles cloud lifecycle for the distributed standalone ProLiant fleet; and HPE Private Cloud AI is operated through the GreenLake managed experience. Each tool matches its workload domain.

Question 50HPE iLO, fleet management and controlled lifecycle operations

An HPE ProLiant Gen11 server fails to complete POST and the front-of-server display shows an error. Which embedded log records POST and hardware events independent of the operating system and is viewable in iLO?

  1. The Windows Event Viewer
  2. The /var/log/messages file
  3. The Integrated Management Log (IML) Correct answer.
  4. The SPP installation log

Explanation

The Integrated Management Log (IML) records POST, hardware, and system events independently of the OS and is viewable through iLO. It is the first place to check for POST and hardware fault details during troubleshooting.