I85PREP
⌘ K
ADS study materials
ADS study resources

ADS practice questions

One question at a time. Build your ADS understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Drawings, Templates, and Layers

In a drawing set, a template file is primarily used to do which of the following?

  1. Replace the need for a title block on each layout
  2. Provide a reusable starting point with predefined styles, layers, and sheet setups Correct answer.
  3. Serve as the final deliverable that is issued to the client
  4. Store only the geometry of previously completed projects

Explanation

A template (.dwt) supplies standardized settings such as layers, dimension styles, text styles, linetypes, and layout configurations so every new drawing begins consistently. It does not carry project geometry or replace title blocks. Templates are working aids, not issued deliverables.

Question 2Drawings, Templates, and Layers

A layer named A-WALL-FULL-M is created in a template that follows the AIA layering convention. What does the final '-M' segment most likely indicate?

  1. The discipline that owns the layer
  2. The major grouping of the layer Correct answer.
  3. The modification status of the layer
  4. The drawing scale at which the layer is plotted

Explanation

In AIA-style layer names, the trailing single-character field is the minor group, which further subdivides the major group. The '-M' suffix commonly denotes a minor grouping such as a material or component category. Discipline is the first field (A for architectural), not the last.

Question 3Drawings, Templates, and Layers

Which color setting on a layer causes objects on that layer to print using the plot style's assigned color rather than the layer color?

  1. Color ByBlock
  2. Color 255
  3. Color 7
  4. Color ByLayer Correct answer.

Explanation

When a layer's color is set to ByLayer, objects on that layer inherit the layer color, and the plot style table then maps that layer color to its plotted output. ByBlock makes objects adopt the color of their enclosing block reference instead. Colors 7 and 255 are ordinary indexed colors, not inheritance settings.

Question 4Drawings, Templates, and Layers

A drafter wants every new object to be created on a specific layer without changing the current layer manually each time. Which approach achieves this while keeping the current layer unchanged?

  1. Set the layer as the current layer Correct answer.
  2. Make the target layer the default for new objects through the layer standard
  3. Freeze all other layers before drawing
  4. Use a layer state that locks the target layer

Explanation

New objects are created on the current layer, so making the target layer current is the direct way to control placement. Freezing, locking, or saving layer states affects visibility or editability, not the creation layer. Layer standards enforce naming and properties rather than object placement.

Question 5Drawings, Templates, and Layers

What is the purpose of locking a layer in a drawing?

  1. It prevents the layer from being deleted
  2. It hides the layer from display and plotting
  3. It changes the linetype of all objects on the layer
  4. It prevents objects on the layer from being selected or edited while remaining visible Correct answer.

Explanation

Locking a layer keeps its objects visible and plottable but blocks editing and selection, which protects reference geometry. Hiding is done by turning a layer off or freezing it. Locking has no effect on linetype or on the ability to delete the layer definition.

Question 6Drawings, Templates, and Layers

A user freezes a layer instead of turning it off. Which behavior distinguishes freezing from turning off?

  1. Frozen layers are excluded from regeneration and some object-snap calculations Correct answer.
  2. Frozen layers remain visible but are not plotted
  3. Frozen layers cannot be renamed
  4. Frozen layers are automatically purged when the drawing is saved

Explanation

Frozen layers are not regenerated, which improves performance in large drawings, and their objects are ignored by many object snaps and selection operations. Turning a layer off hides it but keeps it active in regeneration. Neither action renames or purges the layer.

Question 7Drawings, Templates, and Layers

Which layer property controls whether objects on that layer appear in a plotted output while still showing on screen?

  1. Plot Correct answer.
  2. Transparency
  3. Lock
  4. Freeze

Explanation

The Plot column of the layer properties manager toggles whether a layer is included in plotted output while leaving it visible in the drawing editor. Freeze and lock affect visibility and editability respectively but not plotting in this selective way. Transparency changes appearance, not plot inclusion.

Question 8Drawings, Templates, and Layers

A drawing uses a layer state named 'Issued' to capture visibility settings for a milestone. What does restoring that layer state do?

  1. Restores saved on/off, freeze, lock, color, and plot settings for the named layers Correct answer.
  2. Deletes layers created after the state was saved
  3. Converts all layer names to the current layer standard
  4. Replaces the current drawing template with the one used at save time

Explanation

A layer state records properties such as on/off, freeze/thaw, lock, color, linetype, and plot settings for the layers present when it was saved. Restoring it reapplies those properties. It does not delete layers, swap templates, or rename layers to match a standard.

Question 9Drawings, Templates, and Layers

In a template, a dimension style is set with a scale factor appropriate for plotting at 1:50 in model space. What is the main benefit of configuring this in the template rather than per drawing?

  1. It ensures consistent annotation sizing across all drawings created from the template Correct answer.
  2. It eliminates the need for a dimension layer
  3. It automatically updates existing dimensions when the plot scale changes
  4. It removes the need for annotative scaling on layouts

Explanation

Embedding a correctly scaled dimension style in the template gives every new drawing consistent annotation sizes without repeated setup. It does not remove the need for annotative objects or dimension layers, and existing dimensions are not auto-updated by the template.

Question 10Drawings, Templates, and Layers

Which file type is the standard AutoCAD drawing template format?

  1. .dws
  2. .dwt Correct answer.
  3. .dxf
  4. .dwg

Explanation

AutoCAD templates use the .dwt extension and are opened as new drawings with all stored settings. The .dwg extension is a drawing file, .dws is a CAD standards file, and .dxf is a drawing exchange format.

Question 11Drawings, Templates, and Layers

A company wants new drawings to be checked automatically against approved layer names and properties. Which file type stores those standards for checking?

  1. .dws Correct answer.
  2. .ctb
  3. .lin
  4. .dwt

Explanation

A CAD standards file (.dws) stores approved layers, dimension styles, linetypes, and text styles that drawings can be checked against. Templates (.dwt) provide starting settings, plot style tables (.ctb) map colors to plot output, and .lin files define linetypes.

Question 12Drawings, Templates, and Layers

A drafter opens a new drawing from a template and finds that several layers appear in the layer list that the project does not use. What is the most appropriate action?

  1. Freeze every unused layer and leave them in the file
  2. Rename the unused layers to match the project naming scheme
  3. Purge the unused layers after confirming they hold no objects Correct answer.
  4. Delete the template file and start from a blank drawing

Explanation

Purging removes unused layer definitions that contain no objects, keeping the file clean while preserving the template's useful settings. Deleting the template discards standardization, freezing leaves clutter, and renaming does not remove unneeded layers.

Question 13Drawings, Templates, and Layers

Which statement best describes how a layout viewport relates to layers in a drawing?

  1. Layers cannot be controlled from within a layout viewport
  2. Viewport layer overrides permanently change the model space layer state
  3. Each viewport can freeze specified layers independently of other viewports Correct answer.
  4. A layer frozen in model space is automatically thawed in every viewport

Explanation

Layout viewports support per-viewport layer overrides, so a layer can be frozen in one viewport without affecting others or the model space state. These overrides are temporary display settings, not permanent changes to the layer definition.

Question 14Drawings, Templates, and Layers

A layer contains objects that must not be moved or erased but should still be selectable for snapping. Which combination of settings is most appropriate?

  1. Lock the layer and leave it on and thawed Correct answer.
  2. Set the layer color to ByBlock and lock it
  3. Turn the layer off and unlock it
  4. Freeze the layer and set its plot property to false

Explanation

Locking prevents editing of objects while leaving them visible and available for object snaps. Turning off or freezing would hide the geometry, defeating the snapping requirement. Color settings do not control editability.

Question 15Drawings, Templates, and Layers

Which of the following is a valid reason to set an object's color to ByLayer rather than assigning an explicit color?

  1. It prevents the object from being moved to another layer
  2. It allows the object color to be changed globally by editing the layer Correct answer.
  3. It forces the object to plot in black regardless of the plot style
  4. It makes the object invisible in model space

Explanation

ByLayer makes an object inherit its layer's color, so changing the layer color updates all ByLayer objects on it at once. It does not force black output, prevent layer changes, or hide objects.

Question 16Drawings, Templates, and Layers

A drawing must show a layer's objects in one viewport at a reduced lineweight while other viewports show normal lineweight. Which feature supports this per-viewport control?

  1. Block attribute definitions
  2. Layer states stored in the drawing
  3. Plot style tables
  4. Viewport layer overrides Correct answer.

Explanation

Viewport layer overrides let you change properties such as color, linetype, lineweight, and plot for a layer within a single viewport without altering the global layer settings. Layer states, plot styles, and block attributes do not provide per-viewport property overrides.

Question 17Drawings, Templates, and Layers

When creating a title block template, which practice best supports consistent sheet numbering across a project?

  1. Embedding the sheet number in the block name
  2. Placing the sheet number on a frozen layer
  3. Using a field linked to the sheet set or layout property Correct answer.
  4. Typing the sheet number directly into each layout

Explanation

Fields linked to sheet set or layout properties update automatically when sheet numbers change, keeping title blocks consistent. Typed text must be edited manually, frozen layers do not plot, and block names are not visible sheet data.

Question 18Drawings, Templates, and Layers

What happens to objects on a layer when that layer is deleted?

  1. The objects become invisible but remain on the deleted layer
  2. The objects are deleted along with the layer
  3. The objects are moved to layer 0 automatically
  4. The layer cannot be deleted while it contains objects Correct answer.

Explanation

A layer that contains objects cannot be deleted; the objects must first be moved to another layer or erased. Layer 0 also cannot be deleted. Deleting a layer never silently moves or removes its objects.

Question 19Drawings, Templates, and Layers

Layer 0 has special behavior in AutoCAD. Which statement about layer 0 is accurate?

  1. It can be renamed to match a company standard
  2. It is always the current layer when a drawing opens
  3. It cannot be turned off or frozen
  4. It cannot be deleted or renamed Correct answer.

Explanation

Layer 0 is a reserved layer that cannot be deleted or renamed, which is why project geometry should generally be placed on named layers. It can be turned off, frozen, and changed in color like other layers, and it is not guaranteed to be current at open.

Question 20Drawings, Templates, and Layers

A block is defined with all its objects on layer 0 and with ByBlock properties. When the block is inserted onto a layer with a red color, what color do the block objects display?

  1. Red, because layer 0 objects adopt the insertion layer's properties Correct answer.
  2. The color assigned to layer 0 in the drawing
  3. ByBlock, because the block retains its definition color
  4. White, because layer 0 always plots white

Explanation

Objects drawn on layer 0 with ByBlock properties take on the properties of the layer where the block reference is inserted. Inserting on a red layer therefore displays the block in red. Layer 0 itself is not forced to white, and the block does not keep a fixed definition color in this case.

Question 21Drawings, Templates, and Layers

Which action converts a set of drawing layers to match an approved standard's names and properties?

  1. Saving a layer state
  2. Changing the drawing's plot style table
  3. Creating a new layout viewport
  4. Running the layer translator with a standards file Correct answer.

Explanation

The layer translator maps drawing layers to names and properties defined in a standards file or another drawing, producing a converted layer set. Layer states capture properties, viewports control display, and plot style tables affect output, none of which rename or remap layers.

Question 22Drawings, Templates, and Layers

A layer named 'S-GRID' follows the AIA convention. Which discipline does the leading 'S' indicate?

  1. Site
  2. Survey
  3. Structural Correct answer.
  4. Sanitary

Explanation

In the AIA layer naming convention, the first field is the discipline designator, and 'S' stands for structural. Site, sanitary, and survey are not the standard discipline code for 'S' in this convention.

Question 23Drawings, Templates, and Layers

A drafter wants to print a drawing where all layers plot in black except one layer that must plot in red. Which approach is most reliable?

  1. Freeze the red layer and thaw it after plotting
  2. Assign the red layer an explicit red color and use a plot style table that maps it to red Correct answer.
  3. Set all layers to ByBlock color
  4. Turn off all other layers before plotting

Explanation

A color-dependent plot style table can map most colors to black while mapping the red layer's color to red output, giving controlled results. Turning off or freezing layers hides content rather than controlling color, and ByBlock color does not guarantee plot colors.

Question 24Drawings, Templates, and Layers

Which statement about the relationship between templates and layer standards is correct?

  1. Layer standards are stored only in plot style tables
  2. A template cannot contain any layers
  3. A template can embed layers that already conform to a company standard Correct answer.
  4. Templates override the drawing's layer names at plot time

Explanation

A well-built template includes layers that already match the company standard, so new drawings start compliant. Templates can and normally do contain layers, layer standards live in .dws files rather than plot style tables, and templates do not rename layers at plot time.

Question 25Drawing Objects and Annotation

In AutoCAD, which object snap ensures a new line starts exactly at the center of a circle rather than at its quadrant?

  1. Node
  2. Center Correct answer.
  3. Quadrant
  4. Midpoint

Explanation

The Center object snap locks the cursor to the true center point of a circle, arc, or ellipse. Quadrant snaps to the 0/90/180/270 degree points on the circumference, and Midpoint snaps to the middle of a line or arc, so neither lands on the center.

Question 26Drawing Objects and Annotation

A drafter needs a layer's objects to appear on screen but not on any printed output. Which layer setting accomplishes this?

  1. Lock the layer
  2. Set the layer to non-plotting Correct answer.
  3. Freeze the layer
  4. Turn the layer off

Explanation

The Plot column in the Layer Properties Manager controls whether a layer's geometry is included in plotted output. Disabling plotting keeps objects visible in the drawing editor while omitting them from plots. Turning off or freezing a layer hides it on screen as well, and locking only prevents editing.

Question 27Drawing Objects and Annotation

Which command creates a single object from several separate lines and arcs so they can be edited as one?

  1. BOUNDARY
  2. JOIN Correct answer.
  3. GROUP
  4. BLOCK

Explanation

JOIN merges collinear lines, concentric arcs, or continuous polylines into one object while preserving geometry. GROUP and BLOCK keep the source objects separate and only bundle them logically, and BOUNDARY generates a new closed polyline from an enclosed area.

Question 28Drawing Objects and Annotation

What is the primary purpose of using annotative text styles in a drawing that will be plotted at multiple scales?

  1. To convert text objects into multiline attributes
  2. To keep text height constant on the plotted sheet regardless of viewport scale Correct answer.
  3. To automatically translate text into multiple languages
  4. To lock text so it cannot be edited after placement

Explanation

Annotative objects carry scale representations, so the same text displays and plots at a consistent paper height across viewports set to different scales. The drafter adds or removes scale representations rather than manually resizing text for each viewport.

Question 29Drawing Objects and Annotation

Which dimension command is used to dimension the length of an arc along its curve?

  1. DIMLINEAR
  2. DIMARC Correct answer.
  3. DIMALIGNED
  4. DIMRADIUS

Explanation

DIMARC places a dimension that measures the true arc length along the curve of an arc or polyline arc segment. DIMRADIUS reports the radius, while DIMLINEAR and DIMALIGNED measure straight-line distances.

Question 30Drawing Objects and Annotation

Which command should be used to place a table of revision history directly into a drawing?

  1. QLEADER
  2. TABLE Correct answer.
  3. MTEXT
  4. MLEADER

Explanation

The TABLE command inserts a table object with rows and columns that can hold text and be linked to data. MTEXT creates a single multiline text object, and QLEADER and MLEADER create annotation leaders rather than tabular data.

Question 31Drawing Objects and Annotation

What does the Hatch command's 'Associative' option enable?

  1. The hatch updates when its boundary objects are modified Correct answer.
  2. The hatch object is converted to a solid fill
  3. The hatch is automatically placed on the current layer
  4. The hatch pattern is scaled to fit the viewport

Explanation

An associative hatch is linked to its boundary, so editing the boundary geometry causes the hatch to update to the new shape. Layer assignment and pattern scaling are separate settings, and associativity does not change the pattern type.

Question 32Drawing Objects and Annotation

A drafter wants dimension text to read 'Ø25' rather than '25' for a circular feature. Which dimension setting controls this?

  1. Alternate units toggle
  2. Text gap in the fit tab
  3. Text prefix in the dimension style's primary units Correct answer.
  4. Dimension line suppression

Explanation

A prefix added in the dimension style's primary units (or via the text override) places characters such as Ø before the measured value. Alternate units display a second measurement system, and the other settings control line display and spacing.

Question 33Drawing Objects and Annotation

A block must be inserted so that it scales differently in X and Y but stays the same in Z. Which insertion option applies?

  1. Use the Explode option on insertion
  2. Set separate X, Y, and Z scale factors in the Insert dialog Correct answer.
  3. Use the Uniform Scale option
  4. Set the rotation angle to 90 degrees

Explanation

Clearing uniform scale in the Insert dialog exposes independent X, Y, and Z scale fields, allowing non-uniform scaling. Uniform Scale forces all three axes to the same value, rotation changes orientation only, and Explode breaks the block into components.

Question 34Drawing Objects and Annotation

In a layout, a viewport is set to a scale of 1:2. A line drawn 100 units long in model space appears how long on the plotted sheet?

  1. 200 units
  2. 100 units
  3. 50 units Correct answer.
  4. 25 units

Explanation

A viewport scale of 1:2 means one paper unit represents two model units, so a 100-unit model line plots as 50 paper units. The scale reduces model geometry by half on the sheet.

Question 35Drawing Objects and Annotation

Which object snap mode should be used to snap to the intersection of two lines that cross but do not share an endpoint?

  1. Apparent Intersection
  2. Intersection Correct answer.
  3. Endpoint
  4. Perpendicular

Explanation

The Intersection snap locates the point where two objects actually cross. Apparent Intersection is used when objects only appear to meet in the current view but do not truly intersect in 3D space, and Perpendicular snaps to a point at a right angle to another object.

Question 36Drawing Objects and Annotation

A dimension style uses a text height of 2.5 mm, but dimension text is placed in paper space layouts at various viewport scales. Which approach keeps plotted text consistent?

  1. Increase the text height to match the largest viewport scale
  2. Place all dimensions in model space at 1:1
  3. Use the OVERRIDE command to change text height per dimension
  4. Set DIMSCALE to 0 and enable annotative dimension styles Correct answer.

Explanation

Setting the overall dimension scale to 0 makes dimension styles annotative, so each scale representation keeps the specified paper height. Manually changing text height per dimension is error-prone, and model-space dimensions at 1:1 will not adapt to viewport scales.

Question 37Drawing Objects and Annotation

A drafter needs to add a leader with a boxed note and a landing line to a drawing. Which command is most appropriate?

  1. LEADER
  2. QLEADER
  3. MLEADER Correct answer.
  4. TOLERANCE

Explanation

MLEADER creates multileader objects with configurable arrowheads, landing lines, and text content, and multileader styles can store the boxed-note format. The legacy LEADER and QLEADER commands create simpler leader objects, and TOLERANCE creates a feature control frame.

Question 38Drawing Objects and Annotation

Which property must be set on a block definition so that its attribute values can be edited per insertion?

  1. The attribute must be defined as variable rather than constant Correct answer.
  2. The attribute must be defined as constant
  3. The attribute must be placed on a locked layer
  4. The block must be exploded after insertion

Explanation

Constant attributes store a fixed value in the block definition and cannot be changed per reference. Defining the attribute as variable (non-constant) allows each insertion to carry its own value, editable through the Enhanced Attribute Editor.

Question 39Drawing Objects and Annotation

A hatch pattern appears too dense when plotted at a small scale. Which setting should be adjusted to correct this?

  1. Hatch draw order
  2. Hatch scale value Correct answer.
  3. Hatch transparency
  4. Hatch angle

Explanation

The hatch scale multiplies the pattern spacing, so increasing the scale spreads pattern lines farther apart and reduces apparent density. Angle rotates the pattern, transparency affects opacity, and draw order changes display stacking.

Question 40Drawing Objects and Annotation

Which command converts an existing polyline into a region suitable for boolean operations such as UNION?

  1. PEDIT
  2. BOUNDARY
  3. REGION Correct answer.
  4. CONVERT

Explanation

REGION creates a planar region object from closed loops, and regions support boolean operations like UNION, SUBTRACT, and INTERSECT. BOUNDARY creates a polyline, PEDIT edits polylines, and CONVERT changes object types such as polylines to 2D polylines.

Question 41Drawing Objects and Annotation

A dimension's measured value must display as a fixed value rather than the true measured distance. Which method achieves this?

  1. Edit the dimension text override Correct answer.
  2. Change the dimension style's text height
  3. Set the dimension's associative property to off
  4. Apply a dimension line suppression

Explanation

Editing the dimension text (or setting a text override) replaces the measured value with the entered string, such as adding a prefix or a fixed value. Changing text height, associativity, or line suppression does not alter the displayed measurement.

Question 42Drawing Objects and Annotation

Which layer property prevents objects on that layer from being selected or modified while still remaining visible?

  1. Layer lock Correct answer.
  2. Layer plot off
  3. Layer freeze
  4. Layer off

Explanation

Locking a layer keeps its objects visible and plottable but blocks selection and editing, which is useful for reference geometry. Turning off or freezing a layer hides the objects, and plot-off only affects output.

Question 43Drawing Objects and Annotation

A user needs a block's attribute values extracted into a spreadsheet for a bill of materials. Which command produces this output?

  1. ATTDISP
  2. ATTDEF
  3. BATTMAN
  4. ATTEXT or DATAEXTRACTION Correct answer.

Explanation

DATAEXTRACTION (or the legacy ATTEXT) gathers attribute data from block references into a table or external file such as CSV. ATTDEF defines attributes, ATTDISP controls attribute visibility, and BATTMAN manages attribute definitions in blocks.

Question 44Drawing Objects and Annotation

Which object type is best suited for creating a closed, filled shape that can be edited vertex by vertex with grips?

  1. REGION
  2. 3D SOLID
  3. POLYLINE Correct answer.
  4. HATCH

Explanation

A closed polyline is a single editable object whose vertices can be moved with grips, making it ideal for outlines that need frequent shape changes. Regions are boolean-oriented and not vertex-editable in the same way, 3D solids are volumetric, and hatches depend on boundaries.

Question 45Drawing Objects and Annotation

A drawing contains a block reference whose attributes are invisible, yet the attributes must appear on the plot. Which action is required?

  1. Set ATTDISP to ON and ensure the attribute definitions are not constant Correct answer.
  2. Set the layer's plot property to off
  3. Explode the block so attributes become text
  4. Change the block's insertion point

Explanation

ATTDISP controls the visibility of non-constant attributes; setting it to ON makes them display and plot. Exploding the block converts attributes to text and loses the block structure, while layer plot-off would remove them from the plot entirely.

Question 46Drawing Objects and Annotation

Two viewports on the same layout show the same model geometry at 1:50 and 1:100, and annotative dimensions must read correctly in both. What must be true of the dimension style?

  1. The style must be annotative and carry scale representations for both 1:50 and 1:100 Correct answer.
  2. The dimensions must be placed in paper space only
  3. The viewports must be locked before dimensions are added
  4. The style must be non-annotative with DIMSCALE set to 50

Explanation

Annotative dimensions store separate scale representations, so each viewport displays the dimension at the correct paper height for its own scale. A single fixed DIMSCALE cannot serve two different viewport scales, and paper-space dimensions would not align with model geometry across viewports.

Question 47Drawing Objects and Annotation

A hatch created with a pick-point inside a region fails to appear after the region's boundary is edited. Which cause is most likely?

  1. The hatch is associative and lost its valid boundary Correct answer.
  2. The hatch angle is set to zero
  3. The hatch layer is current
  4. The hatch scale is too large

Explanation

Associative hatches depend on a valid closed boundary; if editing the region breaks or opens that boundary, the hatch can no longer resolve its fill. Scale, angle, and layer currency affect appearance or placement but not boundary validity.

Question 48Drawing Objects and Annotation

A block is inserted with a negative Y scale factor. What is the resulting effect on the block reference?

  1. The block is exploded automatically
  2. The block is scaled uniformly smaller
  3. The block is mirrored about the X axis Correct answer.
  4. The block is rotated 180 degrees

Explanation

A negative scale factor mirrors the block across the axis perpendicular to that scale direction; a negative Y factor flips the geometry about the X axis. Rotation and uniform scaling are separate transformations, and scale factors never trigger an explode.

Question 49Drawing Objects and Annotation

A drafter wants a table cell to automatically display a computed total from other cells. Which table feature provides this?

  1. A data link with a static value
  2. A block attribute definition
  3. A multiline attribute in the cell
  4. A field inserted into the cell Correct answer.

Explanation

Fields in table cells can reference other cells or objects and update when the referenced values change, giving computed totals. Static data links and block attributes do not recalculate, and multiline attributes are block-related rather than cell formulas.

Question 50Drawing Objects and Annotation

A drafter needs a dimension to show a tolerance of plus or minus 0.2 mm on every linear dimension in a drawing. Which dimension style setting group controls this?

  1. Primary Units tab, where the unit precision and suffix are defined
  2. Tolerances tab, where the tolerance method and upper/lower values are defined Correct answer.
  3. Symbols and Arrows tab, where arrowhead size and type are defined
  4. Fit tab, where the global scale for dimension features is defined

Explanation

Tolerance formatting is configured on the Tolerances tab of the dimension style dialog, where you choose the method (for example Symmetrical) and enter the upper and lower values. Once saved to the style, every dimension using that style displays the tolerance. The other tabs govern units, arrowheads, and overall scaling rather than tolerance display.