I85PREP
⌘ K
Idaho DMV Permit Test study materials
Idaho DMV Permit Test study resources

Idaho DMV Permit Test practice questions

One question at a time. Build your Idaho DMV Permit Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic signs, signals and road markings

A driver approaches an intersection where the traffic signal is dark because of a power failure. What must the driver do?

  1. Stop only if another vehicle is already in the intersection
  2. Speed up to clear the intersection before cross traffic arrives
  3. Proceed through the intersection without slowing because the signal is off
  4. Slow down and treat the intersection as an all-way stop Correct answer.

Explanation

When a signal is completely dark, Idaho law requires drivers to treat the intersection as an all-way stop, coming to a full stop and yielding before proceeding. The failure of the signal does not remove the duty to stop and check for cross traffic.

Question 2Traffic signs, signals and road markings

You are driving and the traffic light turns yellow as you approach the intersection. What does a steady yellow signal mean?

  1. The intersection is closed and you must detour
  2. Traffic in all directions must stop immediately
  3. The light is about to turn red, so stop if you can do so safely Correct answer.
  4. You may turn left only after yielding to oncoming traffic

Explanation

A steady yellow light warns that the signal is changing to red. Drivers should stop if they can do so safely; if stopping is not possible, they may proceed with caution.

Question 3Traffic signs, signals and road markings

What does a flashing red traffic signal require a driver to do?

  1. Come to a complete stop, then proceed when it is safe Correct answer.
  2. Yield only to vehicles approaching from the left
  3. Slow down and continue without stopping
  4. Stop and wait for a green light before moving

Explanation

A flashing red signal works like a stop sign: the driver must come to a full stop, yield to cross traffic and pedestrians, and then proceed when the way is clear. There is no need to wait for a green light.

Question 4Traffic signs, signals and road markings

A steady red arrow pointing left is displayed. What may a driver turning left do?

  1. Turn left after coming to a rolling stop
  2. Turn left after slowing down and checking for traffic
  3. Turn left if no pedestrians are in the crosswalk
  4. Stop and remain stopped until the arrow changes to green Correct answer.

Explanation

A steady red arrow means traffic moving in the direction of the arrow must stop and stay stopped until a green arrow or other permissive signal appears. A left turn on a red arrow is not allowed.

Question 5Traffic signs, signals and road markings

A driver sees a flashing yellow signal above the lane. How should the driver respond?

  1. Slow down and proceed with caution while watching for hazards Correct answer.
  2. Stop completely before entering the intersection
  3. Treat the signal as a stop sign and yield to all traffic
  4. Come to a stop only if a pedestrian is present

Explanation

A flashing yellow signal tells drivers to proceed with caution. It does not require a stop, but the driver should reduce speed and scan for cross traffic, pedestrians, and other hazards.

Question 6Traffic signs, signals and road markings

What is the meaning of a solid white line painted across your lane at an intersection?

  1. It indicates that passing is permitted in the lane
  2. It marks a lane reserved for buses only
  3. It shows where parking is allowed along the curb
  4. It marks the point where vehicles must stop for a signal or sign Correct answer.

Explanation

A solid white stop line shows the exact place where a vehicle must stop for a stop sign, traffic signal, or crosswalk. Stopping beyond the line can block pedestrians and interfere with cross traffic detection.

Question 7Traffic signs, signals and road markings

A yellow diamond-shaped sign is posted along a rural road. What kind of information does this shape and color generally convey?

  1. A construction zone restriction in effect
  2. A warning about a road condition or hazard ahead Correct answer.
  3. A regulatory requirement such as a speed limit
  4. A guide to nearby services such as fuel or lodging

Explanation

Yellow diamond signs are warning signs that alert drivers to conditions ahead, such as curves, intersections, or narrowing lanes. Regulatory signs are typically white rectangles, and guide signs are usually green or blue.

Question 8Traffic signs, signals and road markings

What do double solid yellow center lines mean on a two-lane road?

  1. Passing is allowed for traffic in both directions
  2. The lane nearest the line is reserved for turning
  3. Passing is prohibited for traffic in both directions Correct answer.
  4. Traffic must drive to the left of the lines

Explanation

Double solid yellow lines separate traffic moving in opposite directions and prohibit passing in both directions. Drivers may cross them only when making a permitted turn, such as into a driveway or side road, where local rules allow.

Question 9Traffic signs, signals and road markings

You approach a crosswalk where a pedestrian is waiting at the curb and appears ready to cross. What should you do?

  1. Move into the adjacent lane to pass around the pedestrian
  2. Continue at the same speed because the pedestrian has not stepped off the curb
  3. Stop and yield the right of way to the pedestrian Correct answer.
  4. Sound your horn to signal the pedestrian to wait

Explanation

Drivers must yield to pedestrians at crosswalks, and a person waiting at the curb who appears ready to cross should be given the right of way. Failing to yield at a marked or unmarked crosswalk is a common cause of serious injury crashes.

Question 10Traffic signs, signals and road markings

A sign shows a black railroad crossing symbol on a yellow circle. What should a driver expect?

  1. A train station with parking is nearby
  2. The road ends ahead at a rail terminal
  3. Trains are prohibited from using the crossing during daylight
  4. A railroad crossing is ahead and the driver should be prepared to stop Correct answer.

Explanation

The round yellow advance warning sign with a black railroad symbol alerts drivers that a railroad crossing is ahead. Drivers should slow down, look and listen, and be ready to stop if a train is approaching.

Question 11Traffic signs, signals and road markings

You are in a lane marked with a white left-turn arrow, and the arrow signal turns green. What does the green arrow allow?

  1. A U-turn in either direction from the turn lane
  2. A left turn only if the intersection is clear of pedestrians
  3. A left turn only after yielding to oncoming traffic
  4. A protected left turn while oncoming traffic is stopped Correct answer.

Explanation

A green arrow gives a protected movement, meaning oncoming traffic is held by a red light while you turn. You may complete the turn, but you should still watch for pedestrians and vehicles that may be violating the signal.

Question 12Traffic signs, signals and road markings

A white rectangular sign reads "SPEED LIMIT 55." What type of sign is this?

  1. A guide sign showing distance to the next town
  2. A warning sign advising a safe curve speed
  3. A regulatory sign that sets the maximum lawful speed Correct answer.
  4. A construction sign indicating a temporary work zone

Explanation

White rectangular signs with black lettering are regulatory signs, and a speed limit sign establishes the maximum lawful speed under normal conditions. Drivers may still need to drive slower in rain, snow, or heavy traffic.

Question 13Traffic signs, signals and road markings

You are driving on a road with a broken yellow center line on your side. When may you cross it to pass?

  1. Only when an oncoming vehicle is more than one mile away
  2. Only when the vehicle ahead is traveling below the speed limit
  3. When the way ahead is clear and passing is otherwise safe and legal Correct answer.
  4. Never, because a yellow line always prohibits passing

Explanation

A broken yellow line on your side of the center line means you may cross it to pass when it is safe and permitted by other rules. You must ensure there is enough clear distance and that no sign or marking prohibits passing.

Question 14Traffic signs, signals and road markings

What does a sign with a red circle and a diagonal red slash over a symbol mean?

  1. The symbol marks a facility available to drivers
  2. The action shown is required by law
  3. The condition shown is recommended for safety
  4. The action or condition shown is prohibited Correct answer.

Explanation

A red circle with a diagonal slash is the universal prohibition symbol, meaning the action or condition pictured is not allowed. For example, a slash over a left-turn arrow means no left turn.

Question 15Traffic signs, signals and road markings

You are approaching an intersection and want to turn right at a red light. Under Idaho rules, when is this permitted?

  1. Only after the vehicle behind you also stops
  2. After a full stop, when no sign prohibits it and you yield to traffic and pedestrians Correct answer.
  3. Only when a green arrow is displayed for the right turn
  4. Without stopping if the way appears clear

Explanation

Idaho allows a right turn on red after a complete stop unless a sign prohibits it. The driver must yield to pedestrians in the crosswalk and to vehicles approaching on the cross street before turning.

Question 16Traffic signs, signals and road markings

A lane is marked with a white diamond symbol painted on the pavement. What does this marking indicate?

  1. The lane is reserved for high-occupancy or special-use vehicles Correct answer.
  2. The lane is a shoulder open to bicyclists
  3. The lane is closed to all traffic ahead
  4. The lane leads to a mandatory exit

Explanation

A white diamond pavement marking designates a reserved lane, commonly a high-occupancy vehicle (HOV) lane. Signs nearby state the occupancy requirement and the hours the restriction applies.

Question 17Traffic signs, signals and road markings

You see a sign with an orange background and black lettering reading "ROAD WORK AHEAD." What should you do?

  1. Change lanes only after passing the work zone
  2. Stop immediately and wait for a flagger
  3. Slow down and be prepared for workers, equipment, and changed traffic patterns Correct answer.
  4. Maintain speed because the work zone has not yet started

Explanation

Orange signs mark construction and maintenance zones. Drivers should reduce speed, increase following distance, and watch for workers, equipment, and temporary lane shifts. Fines for moving violations are often doubled in work zones.

Question 18Traffic signs, signals and road markings

What does a solid white line between two lanes traveling in the same direction indicate?

  1. Lane changes are discouraged and should be made only when necessary Correct answer.
  2. The left lane is reserved for passing only
  3. Lane changes are prohibited at all times
  4. Traffic in the right lane must exit

Explanation

A solid white line separates lanes moving in the same direction and signals that lane changing is discouraged. Drivers should change lanes only when necessary and after signaling and checking mirrors and blind spots.

Question 19Traffic signs, signals and road markings

A pentagon-shaped sign is posted on the left side of a two-lane road. What does this shape identify?

  1. A hospital zone
  2. A school zone or school crossing Correct answer.
  3. A railroad crossing
  4. A rest area

Explanation

The five-sided pentagon shape is reserved for school signs, warning drivers of a school zone or school crossing ahead. Drivers should slow down and watch for children and crossing guards.

Question 20Traffic signs, signals and road markings

You are stopped at a red light in a lane with a white left-turn arrow, and a sign reads "LEFT TURN YIELD ON GREEN." When the light turns green, what must you do?

  1. Wait for a green arrow before entering the intersection
  2. Turn immediately because the green light gives you the right of way
  3. Back up and change to the through lane before turning
  4. Enter the intersection and yield to oncoming traffic before completing the turn Correct answer.

Explanation

A permissive left turn on a green ball requires the driver to enter the intersection when safe and yield to oncoming traffic and pedestrians before completing the turn. A green arrow, by contrast, would provide a protected turn.

Question 21Traffic signs, signals and road markings

A driver sees a crossbuck sign and, just beyond it, a stop line, but no gates or flashing lights. What is the correct procedure?

  1. Stop at the line, look and listen both ways, and cross only when no train is approaching Correct answer.
  2. Sound the horn and cross without stopping to warn the train crew
  3. Proceed without stopping because no active warning devices are present
  4. Stop only if a train is visible from the driver's seat

Explanation

A crossbuck marks a passive railroad crossing where the driver must yield to trains. The driver should stop at the marked line, look and listen in both directions, and cross only when certain no train is approaching, since trains cannot stop quickly.

Question 22Traffic signs, signals and road markings

On a divided highway, you see a white line marking the left edge of your lane next to the median. What does a solid white line on the left edge of the roadway indicate?

  1. The left edge of the travel lane, beyond which is a median or shoulder Correct answer.
  2. The center line dividing opposing traffic
  3. A lane reserved for passing
  4. A bicycle lane along the median

Explanation

On divided highways, the left edge of each direction of travel is marked with a solid white line, while yellow lines mark the left edge of undivided roadways. The white line shows where the travel lane ends at the median or shoulder.

Question 23Traffic signs, signals and road markings

You are approaching an intersection where the signal shows a green ball, but traffic is backed up beyond the intersection. What is the safest action?

  1. Enter the intersection and use the crosswalk area as a waiting space
  2. Drive around the stopped traffic using the opposing lane
  3. Enter the intersection and stop in the middle until traffic moves
  4. Wait behind the stop line until there is room to clear the intersection Correct answer.

Explanation

Even on a green light, a driver should not enter an intersection unless there is room to clear it. Blocking the intersection can obstruct cross traffic, emergency vehicles, and pedestrians using the crosswalk.

Question 24Traffic signs, signals and road markings

A sign shows a black arrow curving to the right inside a yellow diamond, with a smaller yellow plaque below reading "25 MPH." How should the driver interpret the plaque?

  1. It is the minimum speed allowed through the curve
  2. It is an advisory speed for the curve under good conditions Correct answer.
  3. It is the legal maximum speed for the entire road
  4. It applies only to trucks and buses

Explanation

A yellow plaque beneath a warning sign gives an advisory speed, the speed at which the curve can be negotiated comfortably under good conditions. The legal posted speed limit may be higher, but drivers should slow to the advisory speed for the curve.

Question 25Traffic signs, signals and road markings

A driver is in a two-way left-turn lane marked by shared yellow lines with arrows pointing both ways. What is this lane used for?

  1. Emergency vehicles only
  2. Making left turns from either direction, not for through travel Correct answer.
  3. Merging into traffic from a driveway
  4. Passing slower vehicles traveling in the same direction

Explanation

A two-way left-turn lane, marked by inner broken yellow lines and outer solid yellow lines with turn arrows, lets drivers from either direction prepare for a left turn. It is not a travel or passing lane, and drivers should not use it to accelerate or merge.

Question 26Traffic signs, signals and road markings

You are driving at night and a traffic signal ahead shows a single steady yellow light. What does this signal require of you?

  1. Come to a complete stop in every case, even mid-intersection
  2. Speed up to clear the intersection before the light turns red
  3. Continue at the same speed because yellow means proceed
  4. Stop before the intersection unless you are too close to stop safely Correct answer.

Explanation

A steady yellow light warns that the signal is changing to red. Idaho law requires you to stop at the stop line or crosswalk unless you are already so close that stopping cannot be done safely. If you cannot stop safely, proceed through with caution.

Question 27Traffic signs, signals and road markings

An overhead signal displays a red X above one lane of a multi-lane roadway. What does that signal mean for drivers in that lane?

  1. The lane is closed and you must not drive in it Correct answer.
  2. The lane is reserved for high-occupancy vehicles only
  3. The lane may be used only when passing another vehicle
  4. The lane is open but caution is advised

Explanation

A red X over a lane means the lane is closed to traffic, often because of a crash, work zone, or oncoming traffic use. Drivers must move out of that lane. A green arrow or no signal generally indicates the lane is open for your direction.

Question 28Traffic signs, signals and road markings

You see a circular sign with a white background and a red border and a red diagonal slash across a black symbol. What does this sign tell you?

  1. The symbol marks a required route for trucks
  2. The action or vehicle shown is prohibited Correct answer.
  3. The sign warns of a hazard ahead in the road
  4. The action shown is recommended for safety

Explanation

A white circle with a red border and a diagonal slash is a regulatory prohibition sign. The symbol inside shows what is not allowed, such as no bicycles or no trucks. Warning signs use yellow diamonds instead.

Question 29Traffic signs, signals and road markings

You are traveling on a road where a solid yellow line is painted on your side of the center line. What does that line indicate about passing?

  1. Passing is prohibited, but you may cross to turn left into a driveway Correct answer.
  2. You must move left to allow faster traffic to pass
  3. Passing is permitted only at night when visibility is reduced
  4. Passing is allowed whenever the road ahead is clear

Explanation

A solid yellow line on your side of the center line means you may not cross it to pass. You may still cross it when making a left turn into a driveway or side road, where the maneuver is legal and safe. Broken yellow lines on your side permit passing when clear.

Question 30Traffic signs, signals and road markings

You approach an intersection where the traffic light is dark because of a power outage. What should you do?

  1. Wait until the signal is repaired before entering
  2. Proceed through without slowing since no signal is showing
  3. Treat the intersection as an all-way stop and yield accordingly Correct answer.
  4. Yield only to vehicles approaching from your right

Explanation

When a signal is not functioning, Idaho law treats the intersection like an all-way stop. You must stop, then proceed in order of arrival, yielding to vehicles already in the intersection and to the right as needed. Treating it as a stop, not a free pass, keeps traffic moving safely.

Question 31Traffic signs, signals and road markings

A rectangular white sign with black lettering reads "WRONG WAY." In what situation would you see this sign facing you?

  1. You have entered a one-way road traveling against the intended direction Correct answer.
  2. You are entering a construction zone with altered lanes
  3. You are approaching a lane that ends ahead
  4. You are approaching a school zone with reduced speed

Explanation

A "WRONG WAY" sign is posted to face traffic that has entered a one-way road or ramp going the wrong direction. Seeing it means you should stop and turn around immediately. It is a regulatory warning that your direction of travel is unsafe and illegal.

Question 32Traffic signs, signals and road markings

You are driving on a freeway and see a white rectangular sign with black text reading "EXIT 42 - 1 MILE." What type of sign is this?

  1. A guide sign that gives route and destination information Correct answer.
  2. A construction sign that marks a work zone
  3. A warning sign that alerts you to a hazard
  4. A regulatory sign that sets a legal requirement

Explanation

Guide signs are typically green, blue, or white rectangles that provide route, exit, and destination information. This sign tells you an exit is one mile ahead so you can plan a lane change. Regulatory signs give orders and warning signs flag hazards.

Question 33Traffic signs, signals and road markings

You are approaching a crosswalk and the pavement is marked with two parallel solid white lines across your lane. What do these lines indicate?

  1. The lines mark the boundaries of a pedestrian crosswalk Correct answer.
  2. The lines mark a lane that ends at the intersection
  3. The lines show where vehicles must stop for a toll
  4. The area is reserved for bicycles crossing the road

Explanation

Two parallel white lines across a roadway mark a crosswalk, showing pedestrians where to cross and drivers where to expect them. Drivers must yield to pedestrians in the crosswalk. Stop lines are single thicker white bars placed before the crosswalk.

Question 34Traffic signs, signals and road markings

You are driving and see a yellow diamond sign showing a pedestrian symbol inside the diamond. What does this sign mean?

  1. A walking trail begins on the right side of the road
  2. Pedestrians are prohibited from crossing at this location
  3. A school bus stop is located at this intersection
  4. A pedestrian crossing is ahead, so slow down and watch for people Correct answer.

Explanation

A yellow diamond with a pedestrian symbol is a warning sign telling drivers that a pedestrian crossing is ahead. You should reduce speed and be ready to yield. Prohibition signs use white circles with a red slash instead.

Question 35Traffic signs, signals and road markings

You are driving in the center lane of a three-lane road, and the lane to your right is marked with a solid white line separating it from your lane. What does that line mean?

  1. The right lane is closed to all traffic
  2. You may change lanes freely whenever traffic is clear
  3. Lane changes are discouraged, and crossing is permitted only when necessary and safe Correct answer.
  4. The right lane is for oncoming traffic

Explanation

A solid white line between lanes moving in the same direction discourages lane changes. You may cross it only when necessary and when it is safe, such as to avoid a hazard or prepare for a turn. Broken white lines indicate lane changes are permitted.

Question 36Traffic signs, signals and road markings

A sign shows a black symbol of a truck on a downgrade inside a yellow diamond, with a plaque below reading "USE LOW GEAR." What does this sign advise?

  1. Trucks must exit the highway before the grade
  2. Trucks are prohibited from using the road ahead
  3. Drivers should downshift to control speed on the steep descent Correct answer.
  4. The road ahead climbs steeply and requires more power

Explanation

This warning sign alerts drivers to a steep downgrade and advises using a lower gear to control speed without overheating the brakes. It applies especially to heavy vehicles but is useful advice for any driver. The grade descends, so engine braking helps maintain safe speed.

Question 37Traffic signs, signals and road markings

You are stopped at a red light in the right lane, and a sign beside the signal reads "NO TURN ON RED." What must you do when the light is red?

  1. Turn right after coming to a full stop and signaling
  2. Wait for a green light before making the right turn Correct answer.
  3. Turn right after yielding to traffic and pedestrians
  4. Turn right only if no pedestrians are present

Explanation

A "NO TURN ON RED" sign overrides the general permission to turn right after stopping at a red light. You must remain stopped until the signal turns green. Yielding and stopping do not authorize the turn when the sign prohibits it.

Question 38Traffic signs, signals and road markings

You are driving in a lane marked with a white bicycle symbol and a white diamond symbol painted together on the pavement. What does this combination indicate?

  1. Bicycles must ride on the sidewalk in this area
  2. Motor vehicles may not use the lane during daylight hours
  3. The lane is reserved exclusively for bicycles at all times
  4. The lane is shared by bicycles and motor vehicles, and bicycles may use the full lane Correct answer.

Explanation

A bicycle symbol with a diamond, often called a sharrow, marks a shared lane where bicyclists may ride in the travel lane. Drivers should expect bicycles and pass only when safe. It does not reserve the lane exclusively for bicycles.

Question 39Traffic signs, signals and road markings

A driver approaches a flashing yellow signal at an intersection where the cross street has a flashing red signal. What is the correct action?

  1. Stop completely, then proceed when clear
  2. Proceed at normal speed because yellow flashing means the right of way
  3. Stop only if another vehicle is visible in the intersection
  4. Slow down and proceed with caution, yielding to cross traffic that has already stopped Correct answer.

Explanation

A flashing yellow signal means slow down and proceed with caution. Because the cross street faces a flashing red, those drivers must stop and then yield, but a cautious driver still watches for vehicles that fail to stop. Flashing yellow does not grant an absolute right of way.

Question 40Traffic signs, signals and road markings

You are driving on a road with a raised concrete median separating your direction from oncoming traffic. You see a yellow diamond sign with a black arrow pointing down and to the left toward the median. What does this sign warn?

  1. The median ends ahead and lanes will merge
  2. The left lane will close and traffic must shift right
  3. Traffic will be diverted to the left around a barrier Correct answer.
  4. A left turn lane opens ahead

Explanation

A downward-diagonal arrow on a yellow diamond warns that traffic must move in the direction of the arrow around an obstacle such as a median or barrier. Drivers should prepare to shift lanes smoothly. It is a warning of a required path change, not a lane closure notice.

Question 41Right-of-way and intersection rules

You approach a four-way stop at the same moment as a vehicle on your right. Who has the right-of-way?

  1. Whichever vehicle is larger
  2. Whichever vehicle signals first
  3. The vehicle on your right Correct answer.
  4. The vehicle on your left

Explanation

At a four-way stop, when two vehicles arrive at the same time, the driver on the left must yield to the driver on the right. Size and turn signals do not establish priority.

Question 42Right-of-way and intersection rules

A steady red traffic light is showing and you want to turn right. What does Idaho law allow?

  1. Turn right only after the light turns green
  2. Turn right without stopping if the way is clear
  3. Turn right after coming to a complete stop, yielding to traffic and pedestrians Correct answer.
  4. Wait for a green arrow in every case

Explanation

A right turn on red is permitted after a full stop unless a sign prohibits it, and you must yield to pedestrians and other traffic. Failing to stop first makes the turn illegal.

Question 43Right-of-way and intersection rules

You are entering a roundabout. Which vehicles must you yield to?

  1. Traffic already circulating in the roundabout Correct answer.
  2. No vehicles, because entering traffic has priority
  3. Vehicles waiting to enter behind you
  4. Only large trucks in the roundabout

Explanation

At a roundabout, entering drivers yield to traffic already in the circular roadway, which typically approaches from the left. Once inside, you proceed counterclockwise and yield to pedestrians at the crosswalks.

Question 44Right-of-way and intersection rules

An emergency vehicle approaches from behind with its siren and lights on while you are in an intersection. What should you do?

  1. Continue through the intersection and then pull to the right Correct answer.
  2. Speed up to stay ahead of it
  3. Turn left to clear the lane
  4. Stop immediately where you are

Explanation

If you are already inside an intersection when an emergency vehicle approaches, clear the intersection first, then pull over. Stopping in the middle of the intersection blocks the emergency vehicle and cross traffic.

Question 45Right-of-way and intersection rules

You reach an intersection where the traffic signal is dark because of a power outage. How should you treat it?

  1. As a four-way stop Correct answer.
  2. As a signal you may ignore if no cars are visible
  3. As a yield sign only
  4. As a green light for the busier road

Explanation

A signal that is not functioning is treated as a stop sign, and if multiple directions are affected it works like a four-way stop. Drivers must stop and then apply the right-of-way rules for simultaneous arrivals.

Question 46Right-of-way and intersection rules

A pedestrian is crossing the roadway in a marked crosswalk at an intersection with no signal. What is your obligation?

  1. Slow down and drive around behind the pedestrian
  2. Proceed if you can pass before reaching the crosswalk
  3. Sound your horn so the pedestrian hurries
  4. Stop and remain stopped until the pedestrian clears your lane and the adjacent lane Correct answer.

Explanation

Drivers must yield to pedestrians in a crosswalk, and Idaho law requires stopping until the pedestrian has cleared your lane and any adjacent lane. Passing behind or honking at a pedestrian does not satisfy that duty.

Question 47Right-of-way and intersection rules

You are driving on a paved road and approach an unpaved road entering from the side. Generally, who yields?

  1. The vehicle that arrives second
  2. The vehicle on the paved road
  3. The vehicle on the unpaved road Correct answer.
  4. The vehicle that is traveling faster

Explanation

When a paved road meets an unpaved road and no signs or signals control the intersection, the vehicle on the unpaved road must yield. This rule reflects the greater difficulty of stopping on gravel or dirt.

Question 48Right-of-way and intersection rules

A school bus ahead of you has stopped with its red lights flashing on a two-lane road. What must you do?

  1. Pass once children reach the shoulder
  2. Stop and wait until the red lights stop flashing Correct answer.
  3. Pass slowly on the left
  4. Honk and continue at the speed limit

Explanation

On a two-lane road, traffic in both directions must stop for a school bus displaying flashing red lights and wait until the lights are turned off. Passing is allowed only after the bus resumes motion or withdraws the signal.

Question 49Right-of-way and intersection rules

You are turning left at a green light with no green arrow. Oncoming traffic is approaching. What is required?

  1. Yield to oncoming traffic before completing the turn Correct answer.
  2. Wait for a green arrow before turning
  3. Proceed because the green light gives you priority
  4. Turn behind the oncoming vehicles without slowing

Explanation

A solid green light allows a left turn only after yielding to oncoming vehicles and pedestrians. A green arrow, when present, provides a protected turn; without it, the turn is unprotected.

Question 50Right-of-way and intersection rules

Two vehicles arrive at an uncontrolled intersection at about the same time, one going straight and one preparing to turn left. Who yields?

  1. The left-turning vehicle yields to the vehicle going straight Correct answer.
  2. The vehicle with the larger engine yields
  3. Both vehicles must stop and wave each other through
  4. The straight vehicle yields to the left-turning vehicle

Explanation

At an uncontrolled intersection, a driver turning left must yield to oncoming vehicles going straight or turning right. The straight-through vehicle keeps its course.