I85PREP
⌘ K
Kenya NTSA Category B study materials
Kenya NTSA Category B study resources

Kenya NTSA Category B practice questions

One question at a time. Build your Kenya NTSA Category B understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road signs, traffic signals and road markings

The traffic light facing you is showing a steady red circle. What must you do?

  1. Stop behind the stop line and wait Correct answer.
  2. Slow down and proceed if the road is clear
  3. Sound the horn and continue through
  4. Stop only when pedestrians are crossing

Explanation

A steady red signal is an order to stop, not a warning. You must bring the vehicle to a halt behind the stop line and stay there until the light shows green, and you must not creep forward onto the pedestrian crossing while waiting.

Question 2Road signs, traffic signals and road markings

You approach a junction where an octagonal sign with a red background and the word STOP is displayed at the end of a solid white line. What does the sign require?

  1. Stop completely, then go when it is safe Correct answer.
  2. Give way only to traffic coming from the right
  3. Slow down and go if you see no traffic
  4. Stop only during the hours shown

Explanation

The octagonal STOP sign is the only sign that demands a complete halt at all times. You must stop at the stop line, check that the way is clear and give way to traffic on the road you are joining before moving off, even when nothing appears to be coming.

Question 3Road signs, traffic signals and road markings

A red circle containing a white horizontal bar is displayed at the mouth of a road on your left. What does it mean?

  1. Pedestrians only beyond this point
  2. No overtaking permitted
  3. No entry for vehicles Correct answer.
  4. No parking at any time

Explanation

A red circle with a white horizontal bar is the no entry sign, and it forbids all vehicles from passing it. It is normally placed at the exit of a one-way street or at a road that is closed to motor traffic, so you must choose another route.

Question 4Road signs, traffic signals and road markings

As you approach a junction the light changes from green to amber. What is the correct action?

  1. Stop, unless stopping safely is not possible Correct answer.
  2. Reverse back behind the stop line
  3. Sound the horn and drive through the junction
  4. Continue at the same speed, since amber means go

Explanation

Amber warns that red is about to follow, so you should stop at the stop line. The only exception is where you have already crossed the line or are so close to it that braking sharply would risk a collision; in that case you continue carefully and clear the junction.

Question 5Road signs, traffic signals and road markings

On a rural road you pass a circular sign with a red border containing the number 80. What does it mean?

  1. The road bends 80 metres ahead
  2. The maximum legal speed is 80 km/h Correct answer.
  3. You may drive at 80 km/h only in the left lane
  4. The minimum speed on this road is 80 km/h

Explanation

A red-bordered circle carrying a number is a mandatory maximum speed limit, and in Kenya the figure is expressed in kilometres per hour. The limit runs from the sign until another speed sign or an end-of-restriction sign is reached, and it applies to every lane.

Question 6Road signs, traffic signals and road markings

What is the meaning of a double continuous white line painted along the centre of the carriageway?

  1. Parking is allowed along the centre of the road
  2. You must not cross or straddle it to overtake Correct answer.
  3. The lane on your side is reserved for slow vehicles
  4. Overtaking is allowed when the road ahead is clear

Explanation

A double continuous centre line marks a stretch where overtaking is too hazardous to permit in either direction. No driver may cross or straddle it in order to pass another vehicle, although crossing it to enter a side road or premises is acceptable where that is safe and lawful.

Question 7Road signs, traffic signals and road markings

A traffic police officer controlling a junction faces you with one arm raised, palm towards you. What must you do?

  1. Wave back and continue past the officer
  2. Stop and wait for the officer's signal Correct answer.
  3. Sound the horn before passing
  4. Turn left at the next junction

Explanation

A raised hand with the palm facing oncoming traffic is the recognised signal to stop. You must halt and stay halted until the officer lowers the arm or signals you to proceed, even if the traffic lights happen to show green.

Question 8Road signs, traffic signals and road markings

A triangular sign with a red border shows a car with skid marks behind it. About what does it warn you?

  1. A compulsory stop ahead
  2. A slippery road surface ahead Correct answer.
  3. A steep hill where you must change to a low gear
  4. A vehicle testing station ahead

Explanation

Triangular signs with a red border give warnings, and this symbol indicates a slippery stretch of road, often caused by rain, spilled oil or loose gravel. Reduce speed gently and avoid harsh braking, acceleration or steering while crossing the affected surface.

Question 9Road signs, traffic signals and road markings

Approaching a T-junction you see two broken white lines painted across your lane, one behind the other. What do these markings require?

  1. A parking restriction along the edge of the road
  2. A give way line: yield to traffic on the major road Correct answer.
  3. A lane set aside for vehicles turning right at the junction
  4. A stop line where every vehicle must halt

Explanation

Double broken lines across your lane are a give way line, normally paired with an inverted triangle sign. They require you to slow down and yield to traffic on the road you are joining, stopping if necessary, but a complete stop is not obligatory when the way is clear.

Question 10Road signs, traffic signals and road markings

In which situation may you wait on the yellow criss-cross lines of a box junction?

  1. Whenever the traffic lights are green
  2. At any time, provided you use your hazard lights
  3. While waiting to turn right Correct answer.
  4. Whenever the traffic ahead of you has stopped

Explanation

You should not enter a box junction unless you can clear it, so you never sit on the markings in a queue. The one accepted exception is when you are turning right and your path is blocked by oncoming traffic, because the marking exists to keep the crossing clear for other flows.

Question 11Road signs, traffic signals and road markings

A triangular warning sign with a red border shows two figures, one larger and one smaller, walking. What does this sign warn you about?

  1. A pedestrian crossing is located just behind the sign.
  2. A school bus stop is provided around the next bend.
  3. Pedestrians are prohibited from the carriageway ahead.
  4. Children may be crossing or walking on the road ahead. Correct answer.

Explanation

Red-bordered triangular signs warn of a hazard ahead. The two walking figures represent children, who may cross or play near the road, so reduce speed and be ready to stop.

Question 12Road signs, traffic signals and road markings

You see a circular blue sign with a white arrow pointing diagonally down to the left. What does it require you to do?

  1. Pass to the left of the obstruction or traffic island. Correct answer.
  2. Turn left at the next junction without stopping.
  3. Do not enter the road on the left.
  4. Give way to traffic approaching from the left.

Explanation

Blue circular signs give mandatory instructions. A white arrow pointing down to the left means keep to the left of the obstruction, such as a traffic island.

Question 13Road signs, traffic signals and road markings

A broken white line runs along the centre of a two-way road. What does it mean for overtaking?

  1. The road ahead is a one-way street with no oncoming traffic.
  2. You may overtake when it is safe and the road ahead is clear. Correct answer.
  3. You must move into the left lane and remain there until the next junction.
  4. Overtaking is prohibited for all vehicles at all times.

Explanation

A broken white centre line separates opposing traffic but allows crossing when safe. You may overtake only if you can see far enough ahead and no vehicle is approaching.

Question 14Road signs, traffic signals and road markings

At a junction, the traffic light shows a green arrow pointing left while the main circular light is red. What may you do?

  1. Proceed straight ahead because a green arrow cancels the red circle.
  2. Treat the junction as an uncontrolled intersection and give way.
  3. Wait until the main circular light also turns green before moving.
  4. Proceed left only if the way is clear. Correct answer.

Explanation

A green arrow is a direction-specific signal. It allows movement only the way the arrow points, after yielding to pedestrians and any traffic already in the junction.

Question 15Road signs, traffic signals and road markings

You see a white diagonal hatched area bounded by a continuous white line in the centre of the road. How should you use it?

  1. Use it as an overtaking lane when the road is clear.
  2. Keep off it and use it only to separate opposing traffic streams. Correct answer.
  3. Stop on it while waiting to turn right at the junction.
  4. Drive on it if the lane beside it is blocked by a parked lorry.

Explanation

A hatched area bounded by a continuous line is not a driving lane. It separates opposing streams or protects turning traffic, so you keep off it except in an emergency.

Question 16Road signs, traffic signals and road markings

At a pedestrian crossing controlled by lights, the vehicle signal turns green but a pedestrian is still crossing. What must you do?

  1. Wait until the pedestrian has finished crossing. Correct answer.
  2. Drive around the pedestrian if there is space on the crossing.
  3. Sound the horn and drive through before the pedestrian moves.
  4. Proceed because the green light gives you priority over pedestrians.

Explanation

A green vehicle signal does not give you the right to drive into a pedestrian still on the crossing. You must wait until the crossing is clear before proceeding.

Question 17Road signs, traffic signals and road markings

You approach a blue circular sign showing three white arrows arranged in a circle. What does it require you to do?

  1. Give way to traffic on the roundabout and go clockwise. Correct answer.
  2. Stop and give way to traffic approaching from your left side.
  3. Travel anticlockwise around the central island.
  4. Sound your horn before entering the roundabout.

Explanation

The blue circular sign with arrows in a circle marks a mini-roundabout. In Kenya traffic keeps left, so you give way to traffic already circulating and pass clockwise around the island.

Question 18Road signs, traffic signals and road markings

You see a rectangular white sign with black letters naming a town, a distance and an arrow pointing straight ahead. What type of sign is this?

  1. A temporary sign marking a road diversion ahead.
  2. A regulatory sign that gives the maximum speed limit for the road.
  3. An information sign showing a destination and distance. Correct answer.
  4. A warning sign about a narrow road ahead.

Explanation

Rectangular signs with place names, route numbers or distances are information and direction signs. They help you plan the route and do not impose a speed limit or warn of a hazard.

Question 19Road signs, traffic signals and road markings

A continuous white line is painted along the centre of the road, and on your side there is a broken white line beside it. What does this combination mean?

  1. You must not cross the continuous line on your side. Correct answer.
  2. Both directions may use the centre of the road for overtaking.
  3. The broken line applies only to traffic coming from the opposite direction.
  4. You may cross the continuous line to overtake whenever the road is clear.

Explanation

In a double white line system, the line nearest your vehicle controls you. A continuous line on your side means you must not cross or straddle it, so overtaking is prohibited. You may cross only where a permitted turn, such as into premises, requires it.

Question 20Road signs, traffic signals and road markings

At a junction, the traffic lights are still lit but a police officer is directing traffic by hand. Whose signal should you follow?

  1. Follow the traffic lights because they are the permanent control.
  2. Obey the police officer rather than the lights. Correct answer.
  3. Wait until the traffic lights are repaired before moving.
  4. Treat the junction as a give-way intersection and proceed.

Explanation

Police hand signals override fixed traffic lights and road signs. When an officer is controlling a junction, follow the officer's directions even if the lights are still lit.

Question 21Road signs, traffic signals and road markings

You approach a junction and see an inverted triangular sign with a red border and a white centre. What does this sign require you to do?

  1. Turn back because the road ahead is closed.
  2. Proceed without slowing because you have priority.
  3. Give way to traffic on the road you are joining or crossing. Correct answer.
  4. Stop completely and wait for a police officer to wave you on.

Explanation

An inverted triangle with a red border is the give way sign. You must slow down, be ready to stop, and let traffic on the major road pass before you join or cross it. It does not require a complete stop when the road is clear.

Question 22Road signs, traffic signals and road markings

A circular sign with a blue background contains a single white arrow pointing straight up. What does it mean?

  1. The road narrows to a single lane ahead.
  2. You must proceed straight ahead only. Correct answer.
  3. The road ahead is a one-way street.
  4. You must not enter the road ahead.

Explanation

Blue circular signs give mandatory instructions to drivers. A white arrow pointing straight up means you must continue straight ahead and must not turn at that point. The sign is not a warning or a prohibition.

Question 23Road signs, traffic signals and road markings

The traffic light facing you shows a steady green circle and the junction ahead is clear. What should you do?

  1. Sound your horn and accelerate through the junction without checking for other road users.
  2. Stop at the stop line and wait there until a green arrow appears, even though the circle is green.
  3. Proceed through the junction, but be ready to give way to pedestrians and traffic still in it. Correct answer.
  4. Reverse away from the junction so that following traffic has more room to pass you.

Explanation

A steady green circle allows you to proceed if the way is clear. Green does not give an absolute right of way, so you must still give way to pedestrians crossing and to vehicles clearing the junction.

Question 24Road signs, traffic signals and road markings

A triangular warning sign with a red border shows two children running. What action should you take as you approach?

  1. Stop immediately at the sign and wait until a teacher or crossing guard signals you to continue.
  2. Slow down and be ready to stop for children near the road. Correct answer.
  3. Ignore it unless you can already see children standing on the road.
  4. Maintain speed because the sign applies only to school buses.

Explanation

This sign warns of children or a school crossing ahead. You should reduce speed and scan the road edges because children may move unpredictably. A full stop is required only when children are actually crossing or the way is not clear.

Question 25Road signs, traffic signals and road markings

You see a circular sign with a red border containing a black bicycle symbol. What does it mean?

  1. A bicycle repair workshop is ahead.
  2. Bicycles are prohibited from the road ahead. Correct answer.
  3. A route reserved for bicycles only.
  4. Cyclists using this road must give way to motor vehicles at all times.

Explanation

A red circle is a prohibitory sign, so a bicycle inside it means cycling is banned on the road ahead. A blue circle with a bicycle would instead show a route reserved for bicycles. The sign does not give cyclists a duty to give way.

Question 26Road signs, traffic signals and road markings

You are approaching a pedestrian crossing marked by broad white stripes across the road. A pedestrian steps onto the stripes. What must you do?

  1. Continue if you can pass before the pedestrian reaches your lane.
  2. Flash your headlights and proceed through the crossing.
  3. Stop and give way to the pedestrian on the crossing. Correct answer.
  4. Sound your horn so the pedestrian waits for you.

Explanation

Broad white stripes mark a zebra crossing, and a pedestrian who is on the crossing has priority. You must stop and allow the pedestrian to cross safely. You should approach such crossings at a speed that lets you stop comfortably.

Question 27Road signs, traffic signals and road markings

A rectangular blue sign at the roadside shows a large white letter 'P'. What does it indicate?

  1. A petrol station is ahead.
  2. A police checkpoint is ahead.
  3. Pedestrians must use a subway.
  4. Parking is permitted in the indicated area. Correct answer.

Explanation

A blue rectangular sign with a white letter P is an information sign for parking. An arrow or supplementary plate may show where the parking area is or when parking applies. It is not a warning or a police sign.

Question 28Road signs, traffic signals and road markings

A triangular sign with a red border shows a black cross symbol. What does it warn you about?

  1. A church is ahead.
  2. A railway crossing is ahead.
  3. A crossroads is ahead. Correct answer.
  4. A hospital is ahead.

Explanation

A triangular warning sign with a black cross warns that a crossroads is ahead. You should slow down and check carefully for traffic joining or crossing from the side roads. A railway crossing uses a different warning symbol.

Question 29Road signs, traffic signals and road markings

At a junction controlled by an octagonal STOP sign, there is a continuous white line painted across your lane. Where must you stop?

  1. Ten metres before the STOP sign so that other drivers can see you clearly and safely.
  2. At the stop line, or at the junction edge if no line is painted. Correct answer.
  3. Anywhere within the junction as long as you stop for at least three seconds.
  4. After the junction so that you do not block the path of other vehicles.

Explanation

A stop line marks the exact place where you must stop at a STOP sign. If no stop line is present, you must stop at the edge of the junction where you can see approaching traffic. Stopping elsewhere can obstruct visibility or block other road users.

Question 30Road signs, traffic signals and road markings

You see a circular sign with a blue background and a white bicycle symbol. How should you interpret it while driving a car?

  1. The road ahead is closed to all traffic until further notice.
  2. Cyclists using this road must give way to cars at the next junction they reach.
  3. Parking spaces for bicycles are provided just ahead.
  4. The route is for bicycles only, so do not drive your car there. Correct answer.

Explanation

A blue circle gives a mandatory instruction, and the bicycle symbol means the route is reserved for bicycles. As a car driver you should not use that route unless another sign explicitly permits you. This is different from a red circle, which would prohibit bicycles.

Question 31Road signs, traffic signals and road markings

A circular sign with a red background and a single white horizontal bar is placed at the entrance to a road. What does it mean?

  1. The road is reserved for pedestrians only
  2. All vehicles must give way to oncoming traffic
  3. No parking is allowed beyond this point
  4. No entry for vehicular traffic Correct answer.

Explanation

The red circle with a white horizontal bar is the no entry sign. It tells drivers that they must not enter that road or lane from this direction. It is not a parking sign, a pedestrian-only sign or a give way instruction.

Question 32Road signs, traffic signals and road markings

You are approaching a junction where the road surface is marked with a large yellow box containing diagonal lines. When are you permitted to enter the box?

  1. After stopping for at least three seconds at the box boundary
  2. Whenever the traffic light ahead shows green for your lane
  3. When your exit is clear, except when waiting to turn right Correct answer.
  4. At any time, provided you do not stop with any wheel inside the box

Explanation

A yellow box junction must be kept clear. You may enter only if your exit road is clear, so that you do not block the junction. The exception is when you are turning right and are stopped only by oncoming traffic.

Question 33Road signs, traffic signals and road markings

A circular sign has a red border, a white background and the black number 50. What does it tell you?

  1. The road ahead is 50 metres long
  2. Only vehicles weighing over 50 tonnes may use the road
  3. The maximum permitted speed is 50 km/h Correct answer.
  4. The minimum permitted speed is 50 km/h

Explanation

A red-bordered circle with a black number is a speed limit sign. It sets the maximum legal speed, not a minimum or a distance. In Kenya the figure is read in kilometres per hour.

Question 34Road signs, traffic signals and road markings

The traffic light facing you changes from green to amber as you approach the stop line. What is the correct action?

  1. Stop at the line unless stopping is unsafe Correct answer.
  2. Continue at the same speed because amber means proceed
  3. Stop immediately, even if your vehicle is already crossing the junction
  4. Sound your horn and accelerate through the junction

Explanation

Amber means stop, and you should stop at the stop line if you can do so safely. You should not accelerate to beat the red light. If you are already too close to stop safely, continue through the junction with care.

Question 35Road signs, traffic signals and road markings

Two continuous yellow lines are painted along the edge of the road beside the kerb. What do they mean?

  1. Loading is permitted only during off-peak hours
  2. Only buses may stop to pick up passengers
  3. Parking is allowed for up to two hours
  4. No parking at any time Correct answer.

Explanation

Double continuous yellow lines along the kerb indicate that parking is prohibited at all times. They are not a time-limited parking bay, and they do not reserve the space for buses. Drivers should also check for any additional kerb markings that may restrict loading.

Question 36Road signs, traffic signals and road markings

A triangular warning sign with a red border contains a black exclamation mark. What does it warn you about?

  1. A general hazard with no specific sign Correct answer.
  2. A compulsory stop sign is ahead
  3. A pedestrian crossing with no lights is ahead
  4. A railway level crossing without barriers is ahead

Explanation

The exclamation mark warning sign is used for a hazard that is not covered by a more specific sign. It tells you to slow down and be prepared for an unexpected danger. The sign does not by itself mean stop, nor does it identify a pedestrian or railway crossing.

Question 37Road signs, traffic signals and road markings

A white arrow painted on the road surface in your lane points straight ahead only. What does it require you to do?

  1. You must stop before the arrow and wait
  2. You may turn right if the road is clear
  3. You must continue straight ahead from that lane Correct answer.
  4. The lane is reserved for buses and matatus

Explanation

A white arrow on the road surface shows the direction that traffic in that lane must follow. An arrow pointing straight ahead means you must go straight and must not turn from that lane. You should change lanes earlier if you intend to turn.

Question 38Road signs, traffic signals and road markings

At a traffic light, the red light is showing together with the amber light. What does this combination mean?

  1. Stop and wait; the green light will follow Correct answer.
  2. The signals are faulty; treat the junction as a give way
  3. Proceed if the junction is clear
  4. Turn left only, after yielding to pedestrians

Explanation

Red and amber together are part of the normal sequence before green. They mean you must remain stopped and prepare to move when green appears. You must not treat the combination as permission to enter the junction.

Question 39Road signs, traffic signals and road markings

You are approaching a pedestrian crossing with white zig-zag lines painted along the road edge. What rule applies to these lines?

  1. You must not park or overtake within the zig-zag area Correct answer.
  2. You must sound your horn before entering the area
  3. You may stop on the zig-zag lines to set down a passenger
  4. You may overtake if no pedestrian is waiting

Explanation

White zig-zag lines at a pedestrian crossing are there to keep the approach clear. Parking and overtaking are prohibited within the marked area, so that drivers can see pedestrians and stop safely. The restriction applies even when no pedestrian is visible.

Question 40Road signs, traffic signals and road markings

At a railway level crossing, a red light starts flashing as you approach. What must you do?

  1. Sound your horn and proceed with caution
  2. Continue if you cannot see or hear a train approaching
  3. Slow down and cross if the barriers are raised
  4. Stop and wait until the light stops flashing Correct answer.

Explanation

A flashing red light at a level crossing means you must stop. You must remain stopped until the light stops flashing and the crossing is clear. Never cross merely because you cannot see a train or because the barriers are raised.

Question 41Road signs, traffic signals and road markings

A triangular warning sign with a red border shows two black lines that curve inward towards each other and meet at a narrow point. What does this sign warn you about?

  1. A dual carriageway begins ahead.
  2. A sharp left bend follows immediately.
  3. The road narrows on both sides ahead. Correct answer.
  4. The road surface becomes uneven for a short distance.

Explanation

A red-bordered triangle is a warning sign, so it alerts you to a hazard ahead rather than giving an order. The two inward-curving lines show that the carriageway narrows on both sides, so reduce speed and check your position before the restriction.

Question 42Road signs, traffic signals and road markings

You are driving on a two-way road and see a single continuous white line painted along the centre. What does this line require you to do?

  1. Cross it whenever you wish to overtake a slower vehicle.
  2. Use it as a guide only; it has no legal meaning.
  3. Keep left of the line and do not cross it. Correct answer.
  4. Stop immediately and wait for oncoming traffic to pass.

Explanation

A continuous white centre line separates opposing streams of traffic and must not be crossed. Keep well to the left of it and wait behind it if you need to turn or overtake, unless a sign or marking lawfully permits otherwise.

Question 43Road signs, traffic signals and road markings

A triangular sign with a red border shows a black car with wavy lines behind its wheels. What hazard does it warn of?

  1. A vehicle ferry crossing
  2. A slippery road surface ahead Correct answer.
  3. Loose chippings on the road
  4. A steep downhill gradient

Explanation

The wavy skid marks behind the car are the standard warning for a slippery road surface. Slow down before the hazard and avoid sudden braking, acceleration or steering on the affected section.

Question 44Road signs, traffic signals and road markings

At a signalised junction the main light is red, but a green arrow pointing left is illuminated. What does this allow you to do?

  1. Turn left if the way is clear, giving way to pedestrians and other traffic. Correct answer.
  2. Wait behind the stop line until the green arrow goes out.
  3. Proceed straight ahead only after the main light turns green.
  4. Reverse out of the junction because the main light is red.

Explanation

A green filter arrow authorises movement only in the direction shown, even while the main signal remains red. You may make the left turn provided the way is clear and you do not conflict with pedestrians or traffic already lawfully in the junction.

Question 45Road signs, traffic signals and road markings

A two-way road has a broken white line along its centre. What does this marking mean for overtaking?

  1. You may cross the line to overtake when it is safe and the road ahead is clear. Correct answer.
  2. The road ahead is one-way in your direction.
  3. Overtaking is prohibited at all times.
  4. You must drive on the right-hand side of the line.

Explanation

A broken white centre line may be crossed for overtaking or turning when you can see that it is safe. It does not give priority, so make sure there is no oncoming traffic and no restriction such as a solid line or sign.

Question 46Road signs, traffic signals and road markings

A circular blue sign contains a white arrow pointing diagonally down to the left. What does it require you to do?

  1. Pass on the left side of the obstruction or traffic island. Correct answer.
  2. Turn left at the next junction without exception.
  3. Give way to traffic approaching from the left.
  4. Leave the road and use the left-hand shoulder.

Explanation

A blue circular sign with a white arrow is a mandatory direction sign. The downward-left arrow means keep to the left of the traffic island or obstruction, not that you must turn left at a junction.

Question 47Road signs, traffic signals and road markings

A triangular warning sign with a red border shows three black arrows arranged in a circle. What does it tell you?

  1. A vehicle testing station is ahead.
  2. A roundabout is ahead; be prepared to give way to traffic already circulating. Correct answer.
  3. A one-way street begins at the next junction.
  4. A compulsory left turn is ahead.

Explanation

The three arrows in a circle warn that a roundabout is approaching. Reduce speed, choose the correct lane and be ready to give way to traffic already on the roundabout unless signs or signals direct otherwise.

Question 48Road signs, traffic signals and road markings

You see a circular sign with a red border and a black U-shaped arrow crossed by a red diagonal line. What does it prohibit?

  1. Turning left at the next junction
  2. Entering the road ahead
  3. Making a U-turn at that location Correct answer.
  4. Reversing along the carriageway

Explanation

The red border and diagonal slash make this a prohibition sign. The U-shaped arrow identifies the banned movement as a U-turn, so you must continue in a permitted direction instead.

Question 49Road signs, traffic signals and road markings

A section of the carriageway is marked with white diagonal stripes surrounded by a continuous white border line. How should you treat this area?

  1. Drive over it whenever your lane is congested.
  2. Enter it only when overtaking a vehicle that is turning right.
  3. Use it as a waiting area when traffic queues at a junction.
  4. Treat it as an area you must not enter except in an emergency. Correct answer.

Explanation

Diagonal stripes bordered by a continuous white line mark an area that traffic should keep off. You may enter only in an emergency, for example to avoid a collision; using it as a queueing or overtaking space is not permitted.

Question 50Road signs, traffic signals and road markings

At a junction, the traffic light facing you shows a red arrow pointing right while other movements have a green circle. What does the red arrow mean?

  1. The right turn is reserved for buses and emergency vehicles.
  2. You may turn right after giving way to oncoming traffic.
  3. You must not proceed in the direction of the arrow, though other permitted movements may continue. Correct answer.
  4. You must stop all movements and switch off the engine.

Explanation

A red arrow applies to the movement it points to and prohibits that movement while it is showing. If a green circle is also lit, you may take other permitted movements, but you must not turn right until the arrow changes.