I85PREP
⌘ K
SKN Driver's Written Examination study materials
SKN Driver's Written Examination study resources

SKN Driver's Written Examination practice questions

One question at a time. Build your SKN Driver's Written Examination understanding.

First 50 of 199 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Signs, Signals and Road Markings

A driver approaches a junction and sees a red octagonal sign. What must the driver do?

  1. Sound the horn and proceed with caution
  2. Slow down and continue if the road looks clear
  3. Stop completely and give way before proceeding Correct answer.
  4. Yield only to vehicles coming from the right

Explanation

The red octagon is the international STOP sign. It requires a full stop at the stop line or before the junction, and the driver may only move off after giving way to traffic and pedestrians with priority. Rolling slowly through it is a violation even when nothing is visible.

Question 2Road Signs, Signals and Road Markings

At a signalised junction the traffic light shows a steady amber (yellow) alone. What is the correct action?

  1. Stop, unless stopping cannot be done safely Correct answer.
  2. Continue at the same speed because amber permits passage
  3. Accelerate to clear the junction before red
  4. Treat the amber as a give-way and continue slowly

Explanation

A steady amber means the signal is about to turn red and drivers must stop. The only exception is when stopping abruptly would itself be dangerous, for example when a following vehicle is too close. Treating amber as a general permission to proceed is a common and unsafe error.

Question 3Road Signs, Signals and Road Markings

What does a broken white line running along the centre of a two-way road indicate?

  1. The road has two lanes in the same direction
  2. A bus lane begins at that point
  3. Overtaking is prohibited for all vehicles
  4. Overtaking is permitted when it is safe to do so Correct answer.

Explanation

A broken centre line separates opposing streams and may be crossed to overtake or turn when visibility and traffic conditions allow. It does not itself prohibit anything; it merely marks the boundary. A solid line, by contrast, restricts crossing.

Question 4Road Signs, Signals and Road Markings

A driver sees a circular sign with a red border and a black figure of a pedestrian inside. What does it mean?

  1. A pedestrian crossing is ahead
  2. Pedestrians are prohibited from that road Correct answer.
  3. A school zone begins in 100 metres
  4. Pedestrians have priority at the next junction

Explanation

Circular signs with a red border are prohibitory signs. A pedestrian symbol inside one therefore bans pedestrians from the road, for example on a motorway slip road. Warning signs about pedestrians are triangular with a red border instead.

Question 5Road Signs, Signals and Road Markings

A traffic light shows a green arrow pointing left while the main circle is red. What may the driver do?

  1. Wait until the main circle turns green
  2. Proceed in any direction because green is showing
  3. Proceed straight ahead but not turn left
  4. Proceed only in the direction of the arrow, yielding to others Correct answer.

Explanation

A green arrow is a direction-specific permission. It allows movement only the way the arrow points, and only after giving way to traffic and pedestrians already lawfully in the path. The red circle still blocks every other movement.

Question 6Road Signs, Signals and Road Markings

What is the meaning of a continuous double white line along the centre of the carriageway?

  1. Overtaking is allowed for slow vehicles only
  2. Neither line may be crossed by either direction of traffic Correct answer.
  3. The road is one-way for all traffic
  4. Only the direction facing the nearer line may cross

Explanation

A double continuous line is the strictest centre marking. It forbids crossing from either side, so no vehicle may overtake by entering the opposing lane or make a U-turn across it. Exceptions are limited to specific legal situations such as passing a stationary obstruction where permitted.

Question 7Road Signs, Signals and Road Markings

A driver is on a road with a solid white line on their side and a broken white line on the opposite side. What does this permit?

  1. The driver may cross but oncoming traffic may not
  2. Both directions may cross to overtake
  3. Traffic on the broken-line side may cross; the driver may not Correct answer.
  4. Neither direction may cross the line

Explanation

Where a solid and a broken line are paired, the restriction applies to the side nearest the solid line. Vehicles on the broken-line side may cross when safe, while vehicles on the solid-line side must stay in lane. This arrangement is common where overtaking is safe in one direction only.

Question 8Road Signs, Signals and Road Markings

What does a triangular sign with a red border and an exclamation mark warn of?

  1. The end of all restrictions
  2. A hazard not covered by a specific warning symbol Correct answer.
  3. A parking zone begins
  4. A compulsory stop ahead

Explanation

The exclamation mark in a red-bordered triangle is a general warning used where no dedicated symbol exists, such as for an unclassified hazard. Drivers should reduce speed and be prepared to react. Specific hazards normally receive their own pictogram.

Question 9Road Signs, Signals and Road Markings

A driver wants to turn right at a junction controlled by a green circle but no arrow. Oncoming traffic is approaching. What should the driver do?

  1. Wait for a gap and yield to oncoming traffic before turning Correct answer.
  2. Turn immediately because the green light gives absolute priority
  3. Reverse and take another route
  4. Sound the horn and turn before the oncoming vehicle arrives

Explanation

A green circle permits movement but does not confer priority over oncoming traffic when turning across it. The driver must yield and complete the turn only when a safe gap exists. Turning on the assumption of absolute priority is a frequent cause of collisions.

Question 10Road Signs, Signals and Road Markings

What is indicated by a yellow box junction marked with a criss-cross grid?

  1. Vehicles must stop inside the box when the light is red
  2. Do not enter unless the exit is clear, except when turning right Correct answer.
  3. Parking is allowed inside the box for short periods
  4. The box marks a pedestrian priority zone

Explanation

A box junction keeps the crossing clear. A driver may enter only if the exit road is clear, so the vehicle will not be stranded in the box when the lights change. The usual exception allows entry when turning right, blocked only by oncoming traffic.

Question 11Road Signs, Signals and Road Markings

A circular blue sign shows a white arrow pointing straight ahead. What does it require?

  1. Proceed straight ahead only Correct answer.
  2. Overtaking straight ahead is prohibited
  3. A one-way road starts ahead
  4. Straight ahead is recommended but optional

Explanation

Blue circular signs are mandatory instructions. A white arrow on blue therefore orders traffic to follow the arrow direction, here straight ahead. It is not advisory, and ignoring it is an offence.

Question 12Road Signs, Signals and Road Markings

What does a flashing red light at a level crossing mean for a driver?

  1. Stop and remain stopped until the signals cease Correct answer.
  2. Slow down and cross with care
  3. Stop only if a barrier is lowered
  4. Proceed if no train is visible

Explanation

Flashing red lights at a level crossing mean a train is approaching. The driver must stop and stay stopped until the lights stop flashing and any barrier has fully risen. Proceeding because no train is visible defeats the purpose of the warning.

Question 13Road Signs, Signals and Road Markings

A driver sees a sign showing a red circle with the number 50 in black on a white background. What does it mean?

  1. Distance to the next town is 50
  2. Advisory speed of 50 in wet conditions
  3. Maximum speed is 50 in the units used locally Correct answer.
  4. Minimum speed is 50

Explanation

A red-bordered circle containing a number is a maximum speed limit in the units used in that country. It applies from the sign until a different limit or an end-of-limit sign appears. A blue circle with a number would instead set a minimum speed.

Question 14Road Signs, Signals and Road Markings

A driver passes a sign that is a white circle with a black diagonal bar over a previously shown symbol. What is its effect?

  1. It repeats the restriction for a further distance
  2. It converts the restriction into a recommendation
  3. It cancels the restriction indicated by the earlier sign Correct answer.
  4. It warns that the restriction begins ahead

Explanation

The diagonal bar cancels a previously applied prohibition or limit, restoring the default rule for that road type. Drivers may resume normal behaviour permitted by the general rules. The sign does not extend or postpone the restriction.

Question 15Road Signs, Signals and Road Markings

A driver intends to overtake on a road where a hatched area bounded by a broken line lies between the lanes. How should the driver treat the hatching?

  1. Treat it as a lane reserved for buses
  2. Stop inside it to give way to oncoming traffic
  3. Enter it only if necessary and safe, since the boundary is broken Correct answer.
  4. Never enter it under any circumstances

Explanation

Hatched areas bordered by a broken line may be entered when it is necessary and safe, for example to pass a stationary obstacle. Where the boundary is solid, entry is prohibited. The hatching is not a traffic lane and must not be used for normal travel or waiting.

Question 16Road Signs, Signals and Road Markings

At a junction the light is green for the driver, but a pedestrian is still crossing on the road the driver intends to enter. What is the correct action?

  1. Proceed because the green light gives priority over pedestrians
  2. Wait and allow the pedestrian to finish crossing Correct answer.
  3. Drive around the pedestrian without slowing
  4. Sound the horn to hurry the pedestrian

Explanation

A green light releases vehicular movement but does not override the safety of pedestrians already on the crossing. The driver must yield until the pedestrian has cleared the path. Pressing on regardless is both dangerous and unlawful in most jurisdictions.

Question 17Road Signs, Signals and Road Markings

A driver sees a red circle containing a white horizontal bar on a blue background. What does this sign require?

  1. One-way traffic ahead
  2. Stop and give way
  3. End of a pedestrian zone
  4. No entry for vehicular traffic Correct answer.

Explanation

The no-entry sign is a red circle with a white horizontal bar. It prohibits vehicles from entering that road, typically because it is one-way against the driver's direction. It is distinct from the stop sign and from give-way signs.

Question 18Road Signs, Signals and Road Markings

A driver approaches a pedestrian crossing marked by broad stripes across the road. A pedestrian is waiting at the kerb but has not stepped onto the crossing. How should the driver respond?

  1. Stop only after the pedestrian steps onto the stripes
  2. Continue at the same speed because the crossing is clear
  3. Slow and be prepared to stop so the pedestrian can cross Correct answer.
  4. Flash headlights and proceed

Explanation

At a marked pedestrian crossing, drivers must approach at a speed that allows them to stop for anyone waiting to cross. The duty is not limited to pedestrians already on the markings. Failing to slow for a waiting pedestrian is a common cause of collisions.

Question 19Road Signs, Signals and Road Markings

What is the meaning of a sign showing a bicycle inside a red-bordered circle?

  1. A cycle route begins ahead
  2. Cycles must be pushed on that road
  3. Cyclists have priority over motor vehicles
  4. Cyclists are prohibited from using that road Correct answer.

Explanation

A red-bordered circle is prohibitory, so a bicycle inside one bans cyclists from the road, as on some tunnels and motorways. A blue circle with a bicycle would instead indicate a compulsory cycle route. The border colour and shape determine the meaning.

Question 20Road Signs, Signals and Road Markings

A driver is in a lane marked with a white arrow curving left, while the adjacent lane has a straight-ahead arrow. What does the lane arrow require?

  1. Follow the direction shown by the arrow in that lane Correct answer.
  2. Choose any direction once past the arrow
  3. Change lanes to go straight if desired
  4. Stop before the arrow and wait for a signal

Explanation

Lane arrows assign each lane a permitted direction of travel at the junction ahead. A driver in a left-curving arrow lane must turn left and cannot go straight from that lane. Choosing a lane early prevents last-minute swerves.

Question 21Road Signs, Signals and Road Markings

A driver sees a broken yellow line along the edge of the carriageway. What does this generally indicate?

  1. The edge of the carriageway is unmarked
  2. A cycle lane runs beside the road
  3. Stopping and parking are restricted at that edge Correct answer.
  4. Overtaking is permitted across the line

Explanation

Yellow edge markings are used to control waiting and parking rather than overtaking. A broken yellow line generally restricts parking, while a continuous one usually bans stopping altogether. Drivers should check accompanying signs for the exact rule and times.

Question 22Road Signs, Signals and Road Markings

At a junction controlled by traffic lights, the signals are out of order and a police officer is directing traffic. Whose instruction should the driver follow?

  1. The police officer, over the signal heads Correct answer.
  2. The road markings, which override the officer
  3. The traffic lights, since they are the primary control
  4. The vehicle in front, by imitation

Explanation

Where a police officer is directing traffic, their signals take precedence over traffic lights and road markings. Drivers must follow the officer's directions even if a green light would otherwise permit movement. This hierarchy keeps the junction safe when signals fail.

Question 23Road Signs, Signals and Road Markings

A driver approaches a give-way sign at a junction and sees a broken white line across their lane. What is the correct procedure?

  1. Proceed without slowing because the line is broken
  2. Slow down, be ready to stop, and yield to traffic on the priority road Correct answer.
  3. Yield only to traffic approaching from the left
  4. Stop fully every time before entering the junction

Explanation

The give-way sign and broken line require the driver to slow, assess the priority road, and stop only if necessary to let traffic pass. A full stop is mandatory at a stop sign, not at a give-way. Yielding applies to all traffic on the priority road, not one direction.

Question 24Road Signs, Signals and Road Markings

A driver sees a sign with a red circle containing a black car and a black motorcycle side by side. What does it prohibit?

  1. Entry by motorcycles only
  2. Entry by motor vehicles other than those specifically exempted Correct answer.
  3. Parking by cars and motorcycles
  4. Overtaking by cars and motorcycles

Explanation

A red-bordered circle showing motor vehicle symbols prohibits entry by motor vehicles, subject to any exemptions shown on a supplementary plate. The symbols identify the class of vehicle banned, not a manoeuvre. Parking and overtaking are regulated by different signs and markings.

Question 25Road Signs, Signals and Road Markings

A road has a lane marked with a bicycle symbol and a solid white boundary line, and a sign shows a bus and a bicycle. Who may normally use that lane?

  1. Cyclists, and buses where the sign permits them Correct answer.
  2. Vehicles carrying two or more people
  3. Motorcycles only
  4. Any vehicle outside peak hours

Explanation

A lane marked with a bicycle symbol and a solid boundary is reserved for the classes shown on the accompanying sign. Where the sign adds a bus symbol, buses may also use it, but general traffic may not. Other vehicles may enter only where a broken line and signs allow it.

Question 26Road Signs, Signals and Road Markings

A driver approaches a junction and sees an octagonal sign with a red face and the word STOP in white. What must the driver do?

  1. Stop only if a vehicle is already waiting at the junction
  2. Slow down and continue if no other vehicle is visible
  3. Stop completely at the line or before the junction, then proceed only when it is safe Correct answer.
  4. Sound the horn and proceed through the junction without stopping

Explanation

The octagonal red sign is the only sign in the shape of an eight-sided plate used for a full stop requirement. The driver must bring the vehicle to a complete halt at the stop line, or at the edge of the junction if no line is marked, and may move off only after giving way to traffic on the priority road. A rolling or conditional stop does not satisfy the rule.

Question 27Road Signs, Signals and Road Markings

A driver sees a circular sign with a red border containing a black pedestrian figure crossed by a red diagonal line. What does this sign mean?

  1. A pedestrian crossing lies immediately ahead
  2. A school zone with children crossing begins here
  3. Pedestrians are prohibited from using this road Correct answer.
  4. Pedestrians must walk only on the left side

Explanation

In the circular prohibition family, a red border with a diagonal bar cancels or forbids the symbol shown inside. A pedestrian symbol with the bar therefore bans pedestrians from the road, typically on expressways or tunnel approaches. It is not a warning of a crossing ahead, because warning signs are triangular.

Question 28Road Signs, Signals and Road Markings

What does a circular blue sign showing a white pedestrian and a white child on a shared path indicate?

  1. A route shared by pedestrians and cyclists with no separation Correct answer.
  2. A compulsory path for pedestrians only
  3. A pedestrian zone where parking is permitted
  4. A play street where vehicles are banned

Explanation

A blue circle gives a mandatory instruction, and when it shows two user symbols together it designates a shared facility for those users. The blue circular form marks a compulsory shared path rather than a warning. Drivers must expect pedestrians and cyclists to be present and must give way when crossing the path.

Question 29Road Signs, Signals and Road Markings

A driver observes a traffic light showing a single amber circle after the green has ended. What is the correct action?

  1. Continue at the same speed because amber permits passage
  2. Stop at the line unless it is unsafe to do so Correct answer.
  3. Reverse to the previous junction and wait
  4. Accelerate to clear the junction before red appears

Explanation

A steady amber means the signal is about to turn red and drivers must stop, provided they can do so safely. Only when stopping abruptly would risk a collision may the driver continue through. Treating amber as permission to proceed is a common and dangerous error.

Question 30Road Signs, Signals and Road Markings

A driver sees a broken white line marking the edge of the carriageway next to a hard shoulder on a motorway-style road. What does the broken edge line generally indicate?

  1. The boundary of the carriageway where the shoulder may be used only in an emergency Correct answer.
  2. A lane reserved for overtaking only
  3. A mandatory cycle lane along the shoulder
  4. A place where parking is always allowed

Explanation

A broken line at the edge of the carriageway separates the running lanes from the shoulder or verge. The shoulder is not a normal driving lane and is reserved for emergencies and stopping. A continuous edge line would instead mark a firmer boundary.

Question 31Road Signs, Signals and Road Markings

A driver approaches a junction where the traffic light shows a green arrow pointing left while the main circle remains red. What does the arrow permit?

  1. Proceeding straight ahead as well as turning left
  2. Turning left without any need to give way
  3. Ignoring the red circle entirely in all directions
  4. Turning left only, after giving way to traffic and pedestrians it crosses Correct answer.

Explanation

A green arrow authorises movement only in the direction shown, and only that movement is released. Other movements remain controlled by the red circle and must wait. Even when the arrow is green, the driver must yield to pedestrians and traffic already lawfully in the path.

Question 32Road Signs, Signals and Road Markings

A driver sees a triangular sign with a red border showing a symbol of a car skidding. What should the driver anticipate?

  1. A vehicle recovery area on the shoulder
  2. A steep uphill gradient requiring a lower gear
  3. A compulsory winter tyre zone beginning at the sign
  4. A slippery road surface ahead where speed should be reduced Correct answer.

Explanation

Triangular signs with a red border warn of a hazard ahead, and the skidding car symbol denotes a slippery surface. The appropriate response is to reduce speed smoothly and avoid sudden braking or steering. It does not impose a legal equipment requirement or mark a service area.

Question 33Road Signs, Signals and Road Markings

A driver is travelling in a lane bounded on both sides by continuous white lines and sees a bicycle symbol painted inside it. What does this combination mean?

  1. The lane is reserved for cyclists and other vehicles should not enter it Correct answer.
  2. The lane is a normal traffic lane with a cycle warning
  3. Cyclists must dismount and push their bicycles in this lane
  4. Parking for bicycles is provided at the kerb

Explanation

A painted bicycle inside a lane bounded by continuous lines designates a cycle lane reserved for cyclists. Continuous boundary lines mean other vehicles should not cross into the lane during its hours of operation. Drivers may cross only where the line is broken and only when permitted.

Question 34Road Signs, Signals and Road Markings

At a signalised junction the light turns green for the driver, but the exit beyond the junction is blocked by stationary traffic. What should the driver do?

  1. Use the opposing lane to pass the queue
  2. Stay behind the stop line until the exit is clear Correct answer.
  3. Enter and stop on any pedestrian crossing area inside the junction
  4. Enter the junction and wait across it until space appears

Explanation

A green light permits entry only when the driver can clear the junction without blocking it. If the exit is congested, the driver should wait behind the stop line even on green. Entering and stopping inside the junction obstructs cross traffic and can block crossings.

Question 35Road Signs, Signals and Road Markings

A driver sees a rectangular blue sign with a white letter P and a white symbol of a parking disc. What does the sign require?

  1. Parking is reserved for permit holders only
  2. Parking is free and unlimited at all times
  3. Parking is allowed only with a displayed disc showing arrival time Correct answer.
  4. Stopping to set down passengers is prohibited

Explanation

A blue rectangular sign with a P indicates a parking place, and the disc symbol shows that a parking disc must be displayed. The disc records the time of arrival so that the maximum stay can be enforced. It does not mean unrestricted parking or a permit scheme.

Question 36Road Signs, Signals and Road Markings

A driver sees a continuous yellow line along the kerb on the side of the road where they intend to stop. What does this line mean?

  1. Waiting and parking are prohibited along the marked length Correct answer.
  2. Stopping is allowed for picking up passengers only
  3. Loading is permitted but only by goods vehicles
  4. Parking is permitted for up to one hour

Explanation

A continuous yellow line at the kerb marks a waiting and parking prohibition along its length. Even brief stopping to park is not allowed, although a driver may stop momentarily in traffic. A broken yellow line would instead indicate a restriction during stated times.

Question 37Road Signs, Signals and Road Markings

A driver sees a sign with a red border containing a black lorry symbol and, below it, a plate showing a weight figure. What is the effect of the sign?

  1. All goods vehicles must leave the road at the next junction
  2. The road is closed to every vehicle heavier than a car
  3. Goods vehicles above the stated weight are prohibited from the road ahead Correct answer.
  4. Lorries may use the road only between the hours shown

Explanation

The red-bordered circle is a prohibition, and the supplementary plate with a weight figure sets the threshold at which it applies. Only goods vehicles exceeding that weight are banned; lighter goods vehicles remain permitted. The plate specifies a weight limit rather than a time window or a general closure.

Question 38Road Signs, Signals and Road Markings

A driver approaches a roundabout and sees a broken white line across their lane together with a triangular sign showing three arrows in a circle. What is the correct procedure?

  1. Stop completely and wait for a signal from circulating traffic
  2. Give way to traffic already on the roundabout and enter only when there is a safe gap Correct answer.
  3. Sound the horn before entering to announce the approach
  4. Enter immediately because circulating traffic must give way to joining vehicles

Explanation

The broken line and the roundabout warning triangle indicate that the driver must give way to traffic already circulating. The driver enters only when a safe gap exists, without necessarily stopping. Circulating traffic does not yield to vehicles waiting to join.

Question 39Road Signs, Signals and Road Markings

A driver sees a hatched area bounded by continuous white lines in the centre of the road and needs to turn right into a side road beyond it. How should the driver proceed?

  1. Drive along the hatching until the side road appears
  2. Keep outside the hatching and wait for a safe gap before turning Correct answer.
  3. Stop on the hatching to wait for oncoming traffic to clear
  4. Cross the hatching to shorten the turn if no vehicle is nearby

Explanation

A hatched area bounded by continuous lines must not be entered except in an emergency, so a turning driver keeps outside it and waits for a safe gap. Unlike broken-boundary hatching, the continuous form is not available for positioning. Stopping or driving along the hatching is prohibited.

Question 40Road Signs, Signals and Road Markings

A driver sees a sign showing a red circle with a white arrow bending to the right with a red diagonal bar across it. What does the sign require?

  1. A right turn permitted only for buses
  2. A warning of a sharp right bend
  3. A compulsory right turn ahead
  4. No right turn at the junction ahead Correct answer.

Explanation

The red circle with a diagonal bar is a prohibition applied to the symbol beneath it, so a barred right-bending arrow forbids turning right. A compulsory turn would appear as a blue circle without a bar. A bend warning would be a triangular sign.

Question 41Rules of the Road and Right-of-Way

Under Saint Kitts and Nevis road rules, at an unmarked four-way intersection where two vehicles arrive at the same time, which vehicle has the right-of-way?

  1. The vehicle approaching from the right Correct answer.
  2. The vehicle travelling faster
  3. The larger of the two vehicles
  4. The vehicle approaching from the left

Explanation

Where no signs or signals control an intersection, the general rule in Saint Kitts and Nevis is that a driver must give way to traffic approaching from the right. This mirrors the common-law yield-to-the-right convention used across much of the Caribbean. The rule applies regardless of vehicle size or speed.

Question 42Rules of the Road and Right-of-Way

You are approaching a pedestrian crossing where a pedestrian is already on the roadway. What must you do?

  1. Sound your horn and proceed carefully
  2. Flash your headlights and continue
  3. Slow down and pass behind the pedestrian
  4. Stop and give way to the pedestrian Correct answer.

Explanation

A driver must yield to a pedestrian who is already on a marked or unmarked crossing. Stopping is required so the pedestrian can cross safely. Sounding the horn or flashing lights does not transfer priority to the driver.

Question 43Rules of the Road and Right-of-Way

A solid white line separates your lane from the adjacent lane on a two-lane road. What does this marking mean?

  1. The lane is reserved for buses only
  2. Lane changing is discouraged or prohibited Correct answer.
  3. You may overtake if the road ahead is clear
  4. The road narrows ahead

Explanation

A continuous (solid) white line indicates that lane changing across it is discouraged or prohibited, depending on the specific road layout. Overtaking across a solid line is generally not permitted because sight distance is restricted. Drivers should remain in their lane until the line becomes broken.

Question 44Rules of the Road and Right-of-Way

What is the maximum speed limit on a main road in a built-up area of Saint Kitts and Nevis unless signs indicate otherwise?

  1. 50 mph
  2. 40 mph
  3. 20 mph
  4. 30 mph Correct answer.

Explanation

In built-up areas of Saint Kitts and Nevis, the standard speed limit is generally 30 mph unless a sign indicates a different limit. Drivers should always obey posted signs, which may impose lower limits near schools or junctions. Exceeding the limit is an offence.

Question 45Rules of the Road and Right-of-Way

When may you use a handheld mobile phone while driving?

  1. Never while the vehicle is in motion or on a public road in use Correct answer.
  2. When stopped at a red light
  3. When driving below 20 mph
  4. When making a brief call under one minute

Explanation

Using a handheld mobile phone while driving is prohibited because it distracts the driver from the road. Being stopped at a red light or moving slowly does not remove the danger. Hands-free use is the safer alternative where permitted.

Question 46Rules of the Road and Right-of-Way

A police officer signals you to stop at a junction even though the traffic light is green. What should you do?

  1. Proceed slowly past the officer
  2. Stop and follow the officer's direction Correct answer.
  3. Continue because the light is green
  4. Sound your horn to alert the officer

Explanation

Directions given by a police officer take precedence over traffic lights and signs. When an officer signals you to stop, you must stop regardless of the light colour. Officers direct traffic when signals fail or when conditions require manual control.

Question 47Rules of the Road and Right-of-Way

What is the correct action when an emergency vehicle with flashing blue lights and siren approaches from behind?

  1. Maintain your speed and lane
  2. Stop immediately in the middle of the road
  3. Speed up to stay ahead
  4. Pull over safely and allow it to pass Correct answer.

Explanation

Drivers must give way to emergency vehicles using blue lights and sirens. The safe response is to pull over to the side of the road and let the vehicle pass. Stopping abruptly in the middle of the road creates a hazard.

Question 48Rules of the Road and Right-of-Way

When driving at night, when must you dip your headlights?

  1. Only when driving in fog
  2. Only on unlit roads
  3. When approaching oncoming traffic or following another vehicle closely Correct answer.
  4. When driving above 40 mph

Explanation

High beam headlights must be dipped when meeting oncoming traffic or when following another vehicle, so as not to dazzle other drivers. Dazzling oncoming drivers can cause temporary blindness and collisions. Dipped beams should also be used in fog and built-up areas.

Question 49Rules of the Road and Right-of-Way

You intend to turn right at a junction. A pedestrian is crossing the road you are turning into. Who has priority?

  1. The pedestrian, because they are already crossing Correct answer.
  2. Whoever reaches the centre line first
  3. You, because you have a green light
  4. The vehicle behind you

Explanation

A driver turning into a road must give way to pedestrians already crossing that road. Having a green light does not remove the duty to yield to pedestrians. The driver must wait until the pedestrian has cleared the path.

Question 50Rules of the Road and Right-of-Way

On a roundabout, which traffic has priority?

  1. Traffic already on the roundabout Correct answer.
  2. Traffic entering the roundabout
  3. The largest vehicle
  4. Traffic approaching from the left

Explanation

Drivers entering a roundabout must give way to traffic already circulating on it. This keeps the roundabout flowing and prevents collisions at entry points. Entering traffic should slow and yield before joining.