I85PREP
⌘ K
Mauritius AV Driving Theory study materials
Mauritius AV Driving Theory study resources

Mauritius AV Driving Theory practice questions

One question at a time. Build your Mauritius AV Driving Theory understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road signs, signals and road markings

On a Mauritius road, a circular sign with a red border and a white background showing the number 50 means:

  1. The road ahead narrows to 50 centimetres
  2. A speed camera is installed 50 metres ahead
  3. The maximum speed allowed on this road is 50 km/h Correct answer.
  4. The minimum speed allowed on this road is 50 km/h

Explanation

Circular signs with a red border are prohibitory or restrictive signs, so a number inside one gives a limit that must not be exceeded. The figure is read in kilometres per hour, the unit used for speed limits in Mauritius. A minimum-speed instruction would be shown on a blue circular sign instead.

Question 2Road signs, signals and road markings

You approach an inverted triangle sign with a red border and a white centre. What does it require of you?

  1. Give way to traffic on the road you are joining or crossing Correct answer.
  2. Turn back because the road is closed ahead
  3. Reduce speed only if a vehicle is already visible
  4. Stop completely and wait for a green light

Explanation

The inverted red-bordered triangle is the give way sign, and it places a duty on the driver to yield to traffic on the priority road. You need not stop if the road is genuinely clear, but you must be able to stop and must not force other road users to change course. A full stop is demanded only by the separate octagonal stop sign.

Question 3Road signs, signals and road markings

A sign shows a red circle containing a white horizontal bar. What does it tell you?

  1. No parking at any time
  2. One-way traffic begins here
  3. No entry for any vehicle Correct answer.
  4. End of a restriction

Explanation

The red circle with a white horizontal bar is the no entry sign and forbids vehicles from proceeding past it, commonly placed at the exit of a one-way street. It is a prohibitory sign, so the restriction is absolute rather than advisory. Parking restrictions and end-of-restriction signs use different designs.

Question 4Road signs, signals and road markings

A triangular warning sign shows a pedestrian walking on a zebra crossing. How should you respond?

  1. Ignore it because pedestrians must always give way to vehicles
  2. Sound your horn to warn pedestrians and maintain speed
  3. Accelerate to clear the crossing before pedestrians arrive
  4. Expect pedestrians ahead and be prepared to slow or stop for them Correct answer.

Explanation

Triangular signs with a red border are warning signs, so this one alerts you to a pedestrian crossing ahead. The correct response is to reduce speed and be ready to stop, since pedestrians on a zebra crossing have priority. Warning signs never grant you the right to push through.

Question 5Road signs, signals and road markings

What does a continuous solid white line along the centre of the carriageway mean?

  1. You must not cross or straddle it Correct answer.
  2. Overtaking is permitted if the road ahead looks clear
  3. It marks the edge of a parking bay
  4. You may cross it only to enter a side road

Explanation

A continuous solid centre line is a prohibitory road marking that must not be crossed or straddled, because visibility or hazards make overtaking unsafe. It is not merely advice, and enforcement applies. Broken lines, by contrast, may be crossed when it is safe and legal to do so.

Question 6Road signs, signals and road markings

At a junction controlled by traffic lights, the light turns amber as you approach. What is the correct action?

  1. Accelerate hard to pass before the red light appears
  2. Reverse away from the stop line
  3. Continue at the same speed because amber means proceed
  4. Stop, unless you are so close that stopping could cause a collision Correct answer.

Explanation

Amber means stop and prepare for red, and the only exception is when you are already so close to the line that stopping abruptly would be dangerous. The purpose of amber is to clear the junction safely before the opposing traffic receives a green. Treating amber as a signal to speed up is a common and dangerous error.

Question 7Road signs, signals and road markings

A traffic signaller in uniform raises an arm straight up with the palm facing you. What must you do?

  1. Slow down but keep moving past the signaller
  2. Stop and wait until the signal is changed Correct answer.
  3. Continue because only traffic lights have legal authority
  4. Flash your headlights and proceed

Explanation

Directions given by a police officer or authorised traffic signaller take priority over traffic lights and road signs. A raised hand with the palm towards you is the signal to stop. You must obey it even if the light or sign would otherwise allow you to go.

Question 8Road signs, signals and road markings

A blue circular sign shows a white arrow pointing straight ahead. What does it mean?

  1. Straight ahead is the only direction you may take Correct answer.
  2. You must turn right at the next junction
  3. Straight ahead is recommended but turning is allowed
  4. The road ahead is a one-way street coming towards you

Explanation

Blue circular signs are mandatory signs, so a white arrow pointing ahead compels you to travel in that direction. Unlike an advisory route sign, this is a legal requirement. Turning against a mandatory direction sign is an offence.

Question 9Road signs, signals and road markings

You see a broken white line across your lane at a junction, with a stop sign beside it. What does the broken line indicate?

  1. The position where you must stop before proceeding Correct answer.
  2. A line you may ignore because it is broken
  3. A place where overtaking is compulsory
  4. The boundary of a bus stop

Explanation

At a stop sign the transverse line marks the stop line, and where it is broken it still indicates where you must bring the vehicle to a halt. You stop behind it so you can see and be seen before entering the junction. A broken transverse line does not weaken the stop requirement.

Question 10Road signs, signals and road markings

A yellow box junction marking is painted on the road ahead. When may you enter it?

  1. Only if you are driving a bus or a lorry
  2. Only when your exit from the box is clear, apart from waiting to turn right Correct answer.
  3. Never, because the box is reserved for pedestrians
  4. Whenever the light is green, even if the exit is blocked

Explanation

A yellow box junction must be kept clear, so you may enter only if you can clear it without stopping. The usual exception is when you are waiting to turn right and are prevented only by oncoming traffic. Blocking the box obstructs cross traffic and is an offence.

Question 11Road signs, signals and road markings

What is the meaning of a sign showing a red circle with a blue background and a red diagonal line across a letter P?

  1. A car park is located ahead
  2. Parking is allowed for a limited time
  3. Parking is reserved for permit holders
  4. No parking is permitted Correct answer.

Explanation

A blue circle with a red border and a single red diagonal stroke through the symbol is the no parking sign. It means you may not leave the vehicle parked there, although in some cases stopping briefly to set down passengers may be allowed. A red cross instead of a single stroke would mean no stopping at all.

Question 12Road signs, signals and road markings

A triangular warning sign shows a car skidding with wavy tyre tracks. What hazard does it warn of and what should you do?

  1. Loose gravel; drive on the shoulder instead
  2. A steep hill; change to a lower gear and accelerate
  3. A car wash ahead; maintain speed to pass quickly
  4. A slippery road surface; reduce speed and avoid sudden braking or steering Correct answer.

Explanation

The skidding-car symbol warns of a slippery or wet surface where grip is reduced. The correct response is to slow down smoothly and avoid harsh braking, acceleration or steering that could break traction. Warning triangles alert you to the hazard so you can adjust before reaching it.

Question 13Road signs, signals and road markings

At an unmarked junction with no signs, signals or markings giving priority, how should you decide who goes first?

  1. Give way to traffic approaching from your right Correct answer.
  2. The vehicle on the wider road always has priority
  3. The vehicle travelling fastest has priority
  4. The largest vehicle always has priority

Explanation

Where no sign, signal or marking establishes priority, the general rule is to give way to traffic approaching from the right. This prevents simultaneous entry into the junction. Size or speed of vehicle does not create a right of way.

Question 14Road signs, signals and road markings

A double white line system has a continuous line on your side and a broken line on the other. What does this permit?

  1. The lines only apply to heavy goods vehicles
  2. You may cross to overtake whenever you wish
  3. You must not cross the lines, but traffic on the other side may cross when safe Correct answer.
  4. Both directions may cross freely

Explanation

In a double white line system the line nearer to you governs your side, so a continuous line on your side forbids crossing. The broken line on the opposite side allows that traffic to cross when it is safe. The restriction therefore differs by direction of travel.

Question 15Road signs, signals and road markings

You are approaching a pedestrian crossing marked by broad white stripes on the road with flashing amber beacons. What is required?

  1. Reverse if a pedestrian steps onto the stripes
  2. Give way to pedestrians on the crossing and be ready to stop for those waiting Correct answer.
  3. Stop only if a pedestrian raises a hand
  4. Sound your horn and continue at the speed limit

Explanation

Broad white stripes with flashing amber beacons identify a zebra crossing, where pedestrians on the crossing have priority. You must also slow and be prepared to stop for anyone waiting to cross. Horn use and reversing are never appropriate responses at a crossing.

Question 16Road signs, signals and road markings

A sign shows a red circle containing a white arrow pointing left, crossed by a red diagonal line. What does it mean?

  1. Left turn is recommended for heavy vehicles
  2. The left lane is closed for repairs
  3. Left turn ahead is compulsory
  4. No left turn is permitted Correct answer.

Explanation

A red circle with a diagonal red line through a directional arrow is a prohibitory sign, so it forbids that movement. Here the left turn is not allowed. A compulsory direction would be shown on a blue circle without the diagonal stroke.

Question 17Road signs, signals and road markings

What is the purpose of a hatched area bordered by a continuous white line on the carriageway?

  1. A zone you must not enter except in an emergency Correct answer.
  2. A parking area for delivery vehicles
  3. A pedestrian refuge that vehicles may use
  4. A lane reserved for overtaking

Explanation

Hatched areas, often called ghost islands, separate traffic streams and are bordered by lines that must not be crossed. You should not enter the hatched area except in a genuine emergency. They are not parking or overtaking zones.

Question 18Road signs, signals and road markings

A traffic light shows a green arrow pointing right while the main circular light remains red. What does this allow?

  1. Proceed in any direction once the way is clear
  2. Turn right without checking for oncoming traffic
  3. Wait for the main light to turn green before moving
  4. Proceed only in the direction of the arrow, after giving way where required Correct answer.

Explanation

A green filter arrow permits movement only in the direction shown, even while the main light is red. You may still need to give way to other traffic or pedestrians as indicated. The arrow does not authorise any other direction.

Question 19Road signs, signals and road markings

A rectangular blue sign shows a white bicycle symbol. What does it indicate?

  1. A bicycle repair shop ahead
  2. Cyclists must give way to all traffic at all times
  3. A route or lane designated for cyclists Correct answer.
  4. Cyclists are prohibited from this route

Explanation

A blue rectangular sign with a white bicycle marks a route or lane designated for cyclists. Drivers should expect cyclists there and must not obstruct it. Prohibition signs for cyclists would instead be red-bordered circles.

Question 20Road signs, signals and road markings

A triangular sign shows two children running. Where is it typically placed and how should you react?

  1. Near a school or playground; slow down and watch for children Correct answer.
  2. Near a hospital; keep engine noise low only
  3. Near a motorway exit; increase speed to merge
  4. Near a level crossing; stop before the tracks

Explanation

The children symbol is a warning sign placed near schools, playgrounds or places where children may cross. Children can move unpredictably, so you should reduce speed and be ready to stop. The sign does not relate to hospitals or level crossings.

Question 21Road signs, signals and road markings

You see a stop line and the word STOP painted on the road surface at a junction. What is the legal requirement?

  1. Come to a complete stop at the line before proceeding when safe Correct answer.
  2. Slow down and proceed if no traffic is visible
  3. Stop only if another vehicle is already at the junction
  4. Stop only during peak hours

Explanation

A stop line together with the word STOP imposes a legal duty to bring the vehicle to a complete halt at the line. You then proceed only when the way is clear and you have given way as required. A rolling check without stopping does not satisfy the requirement.

Question 22Road signs, signals and road markings

What does a sign showing a red circle with a white horizontal bar and a smaller sign below reading 'Except buses' mean?

  1. All vehicles including buses are prohibited
  2. Only buses must turn back
  3. Buses must stop before entering
  4. No entry for all vehicles except buses Correct answer.

Explanation

The main sign is no entry, and the supplementary plate below creates an exception for the class of vehicle named. So the prohibition applies to all vehicles other than buses. Supplementary plates qualify the main sign rather than reversing its meaning.

Question 23Road signs, signals and road markings

A lane is marked with the word BUS and a solid white line separating it from other lanes. When may a private car use it?

  1. Only outside the hours shown on the accompanying sign, if any Correct answer.
  2. Only when overtaking a bus
  3. Never, under any circumstances
  4. At any time if the other lanes are congested

Explanation

A bus lane is reserved for the vehicles indicated, and any times of operation are shown on the accompanying sign. Outside those times the lane may generally be used by other traffic. Congestion or overtaking a bus does not create a right to enter during restricted hours.

Question 24Road signs, signals and road markings

A driver approaches a junction where the traffic lights are completely dark because of a power failure. What is the safest and correct action?

  1. Proceed at normal speed because the lights no longer apply
  2. Follow the vehicle in front closely through the junction
  3. Wait indefinitely until the lights are repaired
  4. Treat the junction as uncontrolled, slow down and give way as required Correct answer.

Explanation

When signals are not working they give no instruction, so the junction reverts to the ordinary priority rules. You should approach with caution, be ready to stop and give way to traffic from the right where no other priority applies. Proceeding at normal speed or tailgating is dangerous.

Question 25Road signs, signals and road markings

A continuous yellow line is painted along the edge of the carriageway. What does it generally indicate?

  1. A cycle lane begins at that point
  2. The edge of the road may be used for parking at night
  3. Waiting and parking restrictions apply along that edge Correct answer.
  4. The road is one-way in the direction of the line

Explanation

Yellow lines along the kerb indicate waiting or parking restrictions, with the exact scope often given on nearby plates or signs. A continuous yellow line normally means no waiting at any time, while a broken one usually restricts waiting during stated periods. They do not mark cycle lanes or traffic direction.

Question 26Road signs, signals and road markings

A circular sign has a red border, a white background and the number 50 in black in the centre. What does it require of you?

  1. Do not exceed 50 km/h on this road Correct answer.
  2. Expect the road ahead to be 50 metres wide
  3. Reduce speed to 50 km/h only when the road is wet
  4. Maintain exactly 50 km/h at all times

Explanation

Red-bordered circular signs give orders that must be obeyed. A number in the centre is a maximum speed limit in kilometres per hour, applying from the sign until another limit or an end-of-limit sign appears. It is an upper limit, not a target speed; you must still slow below it for hazards, weather or traffic.

Question 27Road signs, signals and road markings

You are driving and see a circular sign with a red border showing a black car alongside a black motorcycle. What is being prohibited?

  1. Use of the road by motor vehicles generally Correct answer.
  2. Overtaking by cars and motorcycles only
  3. Entry for motor vehicles other than motorcycles
  4. Use of the road by motorcycles only

Explanation

A red-bordered circle is a prohibition sign, and the symbols inside show what is banned beyond it. A car and a motorcycle together represent motor vehicles as a class, so the road ahead is closed to motor traffic. Pedestrians and, depending on the plate, certain exempt vehicles may still be permitted.

Question 28Road signs, signals and road markings

A blue circular sign shows a white arrow curving to the left around a white obstacle symbol. What does this sign require?

  1. Pass the obstacle on its left side Correct answer.
  2. Turn left at the next junction
  3. Follow a left-hand bend in the road ahead
  4. Give way to traffic coming from the left

Explanation

Blue circular signs give positive instructions. An arrow bending around an obstacle symbol means you must keep to the side shown, here passing the island or obstruction on your left. It describes a manoeuvre at the feature itself, not the shape of the road further on.

Question 29Road signs, signals and road markings

A triangular sign with a red border shows a black cross in the centre. What does it warn you about?

  1. A hospital with emergency vehicles ahead
  2. A crossroads where another road crosses yours Correct answer.
  3. A railway level crossing without barriers
  4. A church or place of worship ahead

Explanation

Warning triangles have a red border and a black symbol on white. A single upright cross warns of a crossroads ahead where traffic may emerge from a side road, so you should be ready to slow and give way as required. A level crossing is shown by a gate or a train symbol instead.

Question 30Road signs, signals and road markings

You are on a road where the centre line nearest you is broken and the line beyond it is continuous. What does this allow you to do?

  1. Never cross either line for any reason
  2. Cross the lines only to turn right into a side road
  3. Cross both lines to overtake whenever the road seems clear
  4. Cross the lines to overtake only if you can complete the move before the line nearest you becomes continuous Correct answer.

Explanation

In a double white line system, the line nearest your vehicle governs you. If it is broken you may cross the lines to overtake, provided you can see far enough and finish the manoeuvre safely. The continuous line on the far side is a restriction for traffic coming the other way, so a long overtake that keeps you on the wrong side is dangerous.

Question 31Road signs, signals and road markings

A single broken white line runs along the centre of a two-way road. What does it mean for overtaking?

  1. You may cross it to overtake or turn when it is safe to do so Correct answer.
  2. You may cross it only to enter a driveway
  3. It marks the edge of a bus lane
  4. Overtaking is prohibited at all times

Explanation

A broken centre line separates opposing streams of traffic and may be crossed when you can see the road is clear and the manoeuvre is safe. It is a guide rather than a prohibition, so the decision rests on visibility, oncoming traffic and any other markings present.

Question 32Road signs, signals and road markings

You are approaching a junction and see a single broken white line across your lane with give-way signs at the side. What does the broken line require?

  1. Stop completely before the line in every case
  2. Give way to traffic on the main road and proceed only when it is safe Correct answer.
  3. Treat the junction as a roundabout
  4. Accelerate to merge ahead of approaching traffic

Explanation

A broken transverse line at a junction marks a give-way point rather than a compulsory stop. You must slow, look and yield to traffic on the road you are joining, then move off when there is a safe gap. A solid transverse line, by contrast, means you must stop.

Question 33Road signs, signals and road markings

What is indicated by a white diagonal-striped area on the road enclosed by broken white lines?

  1. A mandatory parking zone for any vehicle
  2. A hatched area you should avoid entering unless necessary and safe Correct answer.
  3. A pedestrian refuge you may drive across freely
  4. A lane reserved for overtaking

Explanation

Hatched areas separate traffic streams or shield turning vehicles. When the boundary is broken you may enter only if it is necessary and safe, and you should not use it as a normal driving lane. Where the boundary is continuous, entering is prohibited except in an emergency.

Question 34Road signs, signals and road markings

You are driving at night on an unlit road and see a series of raised reflective studs. Which colour marks the edge of the carriageway on the left?

  1. White
  2. Red Correct answer.
  3. Amber
  4. Green

Explanation

Reflective road studs follow a standard colour code that helps drivers in darkness and poor visibility. Red studs mark the left-hand edge of the carriageway, white studs separate lanes, amber studs mark the central reservation or right-hand edge, and green studs mark slip roads and lay-bys.

Question 35Road signs, signals and road markings

A rectangular sign with a blue background shows a white letter H. What does it indicate?

  1. A hazardous load route
  2. A hotel with parking
  3. A hospital with accident and emergency facilities Correct answer.
  4. A helipad for emergency aircraft

Explanation

A white H on a blue rectangle is the standard sign for a hospital, and it often includes an arrow or distance to guide drivers. It warns that ambulances or emergency vehicles may join the road quickly, so extra care is needed nearby. It does not mark a landing area for aircraft.

Question 36Road signs, signals and road markings

A traffic light shows a red light together with a green arrow pointing left. What should you do if you wish to turn left?

  1. Turn left, giving way to pedestrians and other traffic as needed Correct answer.
  2. Sound your horn before turning left
  3. Treat the green arrow as a warning and stop
  4. Wait until the main red light changes to green

Explanation

A green arrow applies only to the direction it points and overrides the red circular light for that movement. You may proceed in the arrow's direction, but you must still give way to pedestrians crossing and to any traffic already in the junction. Traffic going straight on must continue to wait at the red light.

Question 37Road signs, signals and road markings

On a road with a clearway restriction, what does the sign showing a red circle with a blue background and a red diagonal bar mean?

  1. No parking or waiting at any time on the carriageway Correct answer.
  2. No overtaking permitted
  3. No entry for all vehicles
  4. End of a speed restriction

Explanation

A red circle with a blue background and a single red diagonal bar prohibits waiting, and on a clearway this applies at all times on the carriageway. You may not stop to park or wait, though you may stop briefly to set down or pick up passengers where that is allowed. Stopping on the carriageway can block traffic and is an offence.

Question 38Road signs, signals and road markings

You are approaching a junction where a yellow box marking is painted on the road, and the exit you want is blocked by queuing traffic. What should you do?

  1. Wait before the box until there is space beyond it to clear it completely Correct answer.
  2. Drive around the box using the opposing lane
  3. Stop inside the box beside the queue
  4. Enter the box and wait until the queue moves

Explanation

A yellow box junction must be kept clear so crossing traffic can move. You may enter only when your exit is clear and you can clear the box without stopping, though you may wait in the box when turning right and only oncoming traffic prevents you. Entering a blocked box simply spreads the congestion.

Question 39Road signs, signals and road markings

A driver sees a triangular sign showing a steep downward gradient with the figure 10%. How should this affect driving?

  1. It confirms the road ahead is flat for 10 kilometres
  2. It means the speed limit falls to 10 km/h
  3. It warns of a steep descent where engine braking should be used to control speed Correct answer.
  4. It indicates a 10-metre-wide road ahead

Explanation

A triangle showing a slope with a percentage warns of a steep hill, here a descent of about 10%. On a long descent you should select a lower gear so engine braking helps control speed and avoids overheating the brakes through continuous use. The percentage describes gradient, not distance or a speed limit.

Question 40Road signs, signals and road markings

You are driving behind a large lorry on a two-way road and cannot see the markings ahead. The lorry moves to the left and slows near a junction. What is the safest interpretation?

  1. The lorry is parking, so overtake immediately on the right
  2. The lorry may be turning right or giving way, so hold back until you can see the road and markings clearly Correct answer.
  3. The lorry has broken down and the road is closed
  4. The lorry is inviting you to pass on its left

Explanation

A large vehicle can hide signs, markings and oncoming traffic, and its position near a junction may signal a turn or a give-way. Overtaking on a guess is a common cause of head-on collisions. Hold back, increase the gap and only commit when you can see the markings and the road ahead for yourself.

Question 41Rules of the road and traffic regulations

On a Mauritian road with no sign or marking showing otherwise, what is the general speed limit for cars in a built-up area?

  1. 50 km/h Correct answer.
  2. 80 km/h
  3. 40 km/h
  4. 60 km/h

Explanation

In built-up areas the default maximum speed for light vehicles is 50 km/h unless a sign shows a different limit. This default applies only where no other limit is displayed, so always check for posted signs along the route.

Question 42Rules of the road and traffic regulations

What does a continuous yellow line along the edge or centre of the carriageway generally indicate to a driver?

  1. The road is a one-way street
  2. Parking is permitted at all times
  3. Overtaking or crossing the line is prohibited Correct answer.
  4. Stopping to load goods is allowed

Explanation

A continuous line is a prohibitory marking: you must not cross or straddle it, which also means no overtaking that requires crossing it. It is used where visibility or road layout makes crossing dangerous.

Question 43Rules of the road and traffic regulations

At a pedestrian crossing without traffic lights, a pedestrian steps onto the zebra stripes as you approach. What must you do?

  1. Slow down and pass behind the pedestrian
  2. Stop and give way to the pedestrian Correct answer.
  3. Flash your headlights and keep going
  4. Sound the horn and continue

Explanation

Drivers must give way to pedestrians who are on or entering a zebra crossing, so you should stop and let them cross. Sounding the horn or flashing lights does not transfer priority back to the vehicle.

Question 44Rules of the road and traffic regulations

When may you use the horn in a built-up area in Mauritius?

  1. To signal that you are about to park
  2. To warn of immediate danger or when a horn is needed to avoid an accident Correct answer.
  3. To greet a friend on the pavement
  4. To hurry the vehicle ahead at a green light

Explanation

The horn is a warning device, so its lawful use is limited to warning others of your presence when there is danger of a collision. Using it for greetings, impatience or parking announcements is misuse.

Question 45Rules of the road and traffic regulations

What is the purpose of the seat belt requirement for the driver and passengers in a moving car?

  1. To keep the seats clean
  2. To improve fuel consumption
  3. To reduce injuries and keep occupants inside the vehicle in a collision Correct answer.
  4. To satisfy insurance paperwork only

Explanation

Seat belts restrain occupants so they are less likely to be thrown about or ejected and are more protected in a crash. This is why wearing them is compulsory for the driver and all passengers where fitted.

Question 46Rules of the road and traffic regulations

You are approaching a roundabout and intend to take the second exit, going straight ahead. Which lane should you normally use on a two-lane approach?

  1. The left-hand lane Correct answer.
  2. Either lane, without signalling
  3. The right-hand lane
  4. The hard shoulder

Explanation

For going straight ahead at a roundabout you normally approach in the left-hand lane and keep left around the island. You signal left as you pass the exit before yours to leave.

Question 47Rules of the road and traffic regulations

What does a red traffic light mean for a driver at a junction?

  1. Stop before the stop line and wait Correct answer.
  2. Stop only if a pedestrian is crossing
  3. Slow down and continue carefully
  4. Proceed if the junction looks clear

Explanation

A red light is a mandatory stop signal: you must stop before the stop line, or before the crossing if there is no line. You may only proceed when the signal changes in your favour.

Question 48Rules of the road and traffic regulations

A police officer controlling traffic signals you to stop while the traffic light is green. What should you do?

  1. Sound the horn and continue
  2. Continue because the light is green
  3. Obey the officer and stop Correct answer.
  4. Proceed slowly past the officer

Explanation

Directions given by a police officer on traffic duty override signals, signs and markings. When an officer signals you to stop, you must stop even if the light is green.

Question 49Rules of the road and traffic regulations

You are driving behind a long vehicle on a narrow road and it begins to turn left. Why should you hold back rather than overtake?

  1. Overtaking on the left is always illegal
  2. The rear of the long vehicle may swing out and the turn may need extra road width Correct answer.
  3. Long vehicles always travel slowly
  4. The vehicle will signal with its hazard lights

Explanation

A long vehicle turning can swing its rear end across the road and may need to move out before turning, so passing on the inside is dangerous. Hold back until the manoeuvre is complete and the road is clear.

Question 50Rules of the road and traffic regulations

On a two-way road with a broken white centre line, when is overtaking permitted?

  1. Only on a bend with good visibility
  2. Only when the vehicle ahead is travelling below the speed limit
  3. Never, because the line is broken
  4. Whenever the road ahead is clear and it is safe to do so Correct answer.

Explanation

A broken centre line may be crossed to overtake when the road ahead is clear and the manoeuvre can be completed safely within the permitted speed limit. You must still check for oncoming traffic, junctions and crossings.