I85PREP
⌘ K
Nebraska DMV Permit Test study materials
Nebraska DMV Permit Test study resources

Nebraska DMV Permit Test practice questions

One question at a time. Build your Nebraska DMV Permit Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic Signals, Signs, and Road Markings

A steady red circular traffic signal is displayed at an intersection. What must a driver do before proceeding?

  1. Slow to 15 mph and continue if no traffic is present
  2. Come to a complete stop, then proceed only when it is safe and the signal allows Correct answer.
  3. Yield to traffic on the right and roll through
  4. Stop only if a pedestrian is in the crosswalk

Explanation

A steady red light requires a full stop behind the stop line or crosswalk. After stopping, a driver may proceed only when the way is clear and permitted, such as after yielding on a permitted turn or when the light changes. Rolling through or merely slowing is never acceptable.

Question 2Traffic Signals, Signs, and Road Markings

What does a flashing yellow arrow signal mean for a driver turning left?

  1. You must stop and wait for a green arrow
  2. Left turns are prohibited at all times
  3. You may turn left without yielding to oncoming traffic
  4. You may turn left after yielding to oncoming traffic and pedestrians Correct answer.

Explanation

A flashing yellow arrow permits the turn but does not protect it. The driver must yield to oncoming vehicles and to pedestrians in the crosswalk before completing the left turn. A green arrow, by contrast, gives protected right-of-way.

Question 3Traffic Signals, Signs, and Road Markings

A solid yellow traffic light appears as you approach an intersection. What is the correct action?

  1. Stop if you can do so safely, because the light is about to turn red Correct answer.
  2. Stop immediately regardless of your distance from the intersection
  3. Speed up to beat the red light
  4. Continue at the same speed without checking the intersection

Explanation

A steady yellow signal warns that the red light is coming. The proper response is to stop if you can do so safely; if you are too close to stop safely, proceed through with caution. Accelerating to beat the light is dangerous and unlawful in many circumstances.

Question 4Traffic Signals, Signs, and Road Markings

A steady green traffic light is showing and you want to turn left at the intersection. What does the green light allow?

  1. A left turn only after yielding to oncoming traffic and pedestrians Correct answer.
  2. No left turn until a green arrow appears
  3. A protected left turn with no need to yield
  4. A left turn only from the right lane

Explanation

A steady green circular light allows movement straight or turning, but a left turn on green is permissive. The driver must yield to oncoming traffic and to pedestrians before completing the turn. Only a green arrow provides a protected turn.

Question 5Traffic Signals, Signs, and Road Markings

What does a red octagonal sign at an intersection require of a driver?

  1. Come to a complete stop and proceed when safe Correct answer.
  2. Stop only during posted hours
  3. Reduce speed and proceed if the road is clear
  4. Yield to cross traffic and proceed without stopping

Explanation

The red octagon is the universal shape for a STOP sign. It requires a complete stop at the stop line, crosswalk, or edge of the intersection, followed by proceeding only when the way is clear. The shape alone identifies the sign even if its face is obscured.

Question 6Traffic Signals, Signs, and Road Markings

You approach a yield sign at a ramp merging onto a highway. What is the correct behavior?

  1. Maintain highway speed and merge ahead of existing traffic
  2. Merge only after the vehicle behind you passes
  3. Stop completely in all cases before merging
  4. Slow down or stop as needed and give the right-of-way to traffic already on the highway Correct answer.

Explanation

A yield sign requires you to slow or stop if necessary and let traffic on the through road pass before you enter or merge. You do not have to stop if the way is clear, but you must be prepared to. Failing to yield can cause a merge collision.

Question 7Traffic Signals, Signs, and Road Markings

A yellow diamond-shaped sign with a black symbol typically indicates what?

  1. A warning of a road condition or hazard ahead Correct answer.
  2. A service available at the next exit
  3. A route marker for a state highway
  4. A regulatory requirement you must obey

Explanation

Yellow diamond signs are warning signs. They alert drivers to conditions such as curves, intersections, or road hazards ahead so speed and attention can be adjusted. Regulatory signs are usually white rectangles or red-and-white, and guide signs are typically green.

Question 8Traffic Signals, Signs, and Road Markings

What does a solid white line painted between two lanes traveling in the same direction indicate?

  1. The left lane ends immediately
  2. Passing is permitted at any time
  3. Lane changes are discouraged, and crossing should occur only when necessary Correct answer.
  4. Lane changes are encouraged to improve traffic flow

Explanation

A solid white line separates lanes moving in the same direction and signals that lane changes are discouraged. Drivers should stay in their lane and cross only when necessary and safe. A broken white line indicates that lane changes are permitted.

Question 9Traffic Signals, Signs, and Road Markings

A double solid yellow line is painted in the center of a two-way road. What does it mean for passing?

  1. Passing is permitted only for the direction with lighter traffic
  2. Passing is permitted if the road ahead is clear
  3. Passing is permitted only during daylight hours
  4. Passing is prohibited for traffic in both directions Correct answer.

Explanation

Double solid yellow center lines mean neither direction may cross them to pass. The restriction applies to traffic in both directions and exists where sight distance or road conditions make passing unsafe. Passing is allowed only where a broken yellow line is on your side.

Question 10Traffic Signals, Signs, and Road Markings

A broken yellow line appears on your side of the center of a two-way road. What does this allow?

  1. Passing when it is safe and the way ahead is clear Correct answer.
  2. Driving in the oncoming lane for extended distances
  3. No passing in either direction
  4. Passing only if you exceed the speed limit briefly

Explanation

A broken yellow line on your side of the center line means you may cross it to pass when it is safe. You must still have clear sight distance and enough room to complete the pass. The broken line does not authorize speeding or prolonged driving in the opposing lane.

Question 11Traffic Signals, Signs, and Road Markings

A white painted arrow in a traffic lane points straight ahead but you want to turn right at the next intersection. What should you do?

  1. Stop in the lane and wait for the arrow to change
  2. Turn right from the lane anyway if no police are visible
  3. Back up to reach the turn lane
  4. Follow the arrow and use the proper turn lane to turn right Correct answer.

Explanation

Pavement arrows designate the permitted movement for each lane. If your lane is marked for straight travel, you must follow that direction and change into the correctly marked turn lane to turn. Turning from a lane marked for another movement is unsafe and can violate the law.

Question 12Traffic Signals, Signs, and Road Markings

What does a shared center left-turn lane marked with solid and broken yellow lines on each side allow?

  1. Left turns from either direction into driveways or cross streets Correct answer.
  2. Through traffic in both directions
  3. Passing slower vehicles in either direction
  4. Parking for nearby businesses

Explanation

A shared center left-turn lane is set aside for vehicles from either direction preparing to turn left. Drivers enter it shortly before turning and may not use it for through travel or passing. Using it for other purposes creates head-on conflict risk.

Question 13Traffic Signals, Signs, and Road Markings

You see a sign showing a black silhouette of a pedestrian with a diagonal slash through it. What does this sign mean?

  1. Pedestrians are prohibited in this area Correct answer.
  2. A pedestrian crossing is ahead
  3. Pedestrians have the right-of-way at the next corner
  4. A school crossing guard is on duty

Explanation

A diagonal slash through a symbol indicates a prohibition. A pedestrian symbol with a slash means pedestrians are not allowed in that area, such as on a limited-access highway or a restricted path. Warning signs for crossings do not include a slash.

Question 14Traffic Signals, Signs, and Road Markings

A pentagon-shaped sign is used on Nebraska roadways to indicate what?

  1. A hospital nearby
  2. A railroad crossing ahead
  3. A construction zone
  4. A school zone or school crossing Correct answer.

Explanation

The five-sided pentagon shape is reserved for school signs, warning drivers of a school zone or school crossing ahead. Drivers should reduce speed and watch for children. Railroad crossings use a round yellow warning sign, and construction zones use orange signs.

Question 15Traffic Signals, Signs, and Road Markings

An orange diamond-shaped sign with black lettering appears along your route. What should you expect?

  1. A construction or maintenance zone ahead Correct answer.
  2. A recreational area entrance
  3. A permanent hazard that applies year-round
  4. A change in the speed limit

Explanation

Orange is the color for construction and maintenance warnings. An orange diamond sign alerts you to work zones, lane shifts, or workers ahead, and you should slow down and stay alert. Permanent hazards generally use yellow warning signs.

Question 16Traffic Signals, Signs, and Road Markings

A circular yellow sign with a black X and the letters RR is posted before a crossing. What action is appropriate?

  1. Expect a four-way intersection ahead
  2. Expect a reduced speed zone ahead
  3. Expect a railroad crossing ahead and be prepared to stop Correct answer.
  4. Expect a roundabout ahead

Explanation

The round yellow railroad advance warning sign tells drivers a crossing is ahead. You should slow down, look and listen for trains, and stop if a train is approaching or a signal indicates one. Never stop on the tracks.

Question 17Traffic Signals, Signs, and Road Markings

You are driving and a school bus with flashing red lights and an extended stop arm is stopped on the opposite side of a two-lane road without a median. What must you do?

  1. Stop and remain stopped until the red lights stop flashing Correct answer.
  2. Continue at normal speed because you are in the opposite direction
  3. Slow down and pass carefully
  4. Sound your horn and proceed

Explanation

On an undivided two-lane road, traffic in both directions must stop for a school bus displaying flashing red lights and a stop arm. You remain stopped until the lights stop flashing and the arm retracts. Passing a stopped school bus is dangerous and illegal in this situation.

Question 18Traffic Signals, Signs, and Road Markings

A traffic signal shows a steady red arrow pointing left. What does this mean?

  1. The left turn lane is closed for construction
  2. You may turn left without stopping if no traffic is present
  3. You may turn left after a complete stop if it is safe
  4. Left turns are prohibited in the direction of the arrow until it changes Correct answer.

Explanation

A red arrow is a direction-specific red signal. It prohibits movement in the direction of the arrow until the signal changes to a permitted indication. Unlike a circular red, a red arrow does not allow a permitted turn on red in the direction shown.

Question 19Traffic Signals, Signs, and Road Markings

You are in a lane marked with a white diamond symbol. What does this marking indicate?

  1. A pedestrian crossing zone
  2. A lane that ends ahead
  3. A lane reserved for trucks only
  4. A high-occupancy vehicle or special-use lane Correct answer.

Explanation

A white diamond pavement symbol marks a high-occupancy vehicle (HOV) lane or another specially designated lane. Use of the lane may be limited to vehicles meeting occupancy or vehicle-type requirements posted on signs. Other drivers should stay out of it.

Question 20Traffic Signals, Signs, and Road Markings

You approach an intersection where the traffic signal is dark because of a power outage. What is the correct procedure?

  1. Treat the intersection as a four-way stop and proceed in turn Correct answer.
  2. Yield only to vehicles on your left
  3. Proceed through the intersection at full speed
  4. Wait until the signal is repaired before moving

Explanation

When a traffic signal is not functioning, the intersection is treated as an all-way stop. Each driver must stop and then proceed in the order they arrived, yielding as needed for safety. Treating a dark signal as a green light causes serious intersection crashes.

Question 21Traffic Signals, Signs, and Road Markings

A two-way road has a solid yellow line on your side and a broken yellow line on the opposite side. Which statement is correct?

  1. Only traffic on your side may pass
  2. Neither direction may pass
  3. Both directions may pass when clear
  4. Only traffic on the opposite side may pass Correct answer.

Explanation

When the center line is solid on your side and broken on the other, passing is prohibited for your direction and permitted for the opposing direction when safe. The line nearest you controls your passing privileges. This pattern is common where sight distance differs by direction.

Question 22Traffic Signals, Signs, and Road Markings

What does a white rectangular sign with black lettering stating a speed limit represent?

  1. A regulatory maximum lawful speed Correct answer.
  2. A suggested speed for ideal conditions
  3. A warning that the road curves ahead
  4. A minimum speed requirement

Explanation

White rectangular signs with black legends are regulatory signs, and a posted speed limit is the maximum lawful speed under normal conditions. Drivers may need to drive slower in poor weather or traffic. Advisory speeds appear on yellow warning signs instead.

Question 23Traffic Signals, Signs, and Road Markings

A curb painted red along a Nebraska street means what for parking?

  1. Parking is allowed for up to 15 minutes
  2. Parking, stopping, and standing are prohibited Correct answer.
  3. Parking is allowed only for delivery vehicles
  4. Parking is permitted on weekends only

Explanation

A red-painted curb indicates a no stopping, standing, or parking zone, often to keep fire lanes or intersections clear. Drivers may not stop there even briefly. Other curb colors carry different restrictions, such as yellow for loading.

Question 24Traffic Signals, Signs, and Road Markings

A sign with a black arrow curving to the right under a yellow diamond warns of what?

  1. A curve to the right ahead Correct answer.
  2. A right lane must turn right
  3. A road that ends ahead
  4. A right turn only at the next intersection

Explanation

A yellow diamond containing a curved arrow warns of a curve ahead in the direction shown. Drivers should reduce speed before entering the curve. A regulatory right-turn-only sign is a white rectangle with different wording.

Question 25Traffic Signals, Signs, and Road Markings

You see a flashing red traffic signal at an intersection. How should you respond?

  1. Treat it as a green light
  2. Stop, then proceed when it is safe, as at a stop sign Correct answer.
  3. Stop and wait for a green light before moving
  4. Slow down and proceed without stopping

Explanation

A flashing red signal operates like a stop sign. You must come to a complete stop and then proceed only when the way is clear. A flashing yellow, by contrast, means slow down and proceed with caution without a required stop.

Question 26Traffic Signals, Signs, and Road Markings

A traffic signal displays a steady green circular light at an intersection. What does this allow a driver to do?

  1. Proceed only if turning right, since straight movement requires a separate arrow
  2. Proceed straight or turn, but only after stopping first
  3. Proceed through the intersection if the way is clear, yielding to pedestrians and vehicles already in it Correct answer.
  4. Wait for the light to flash before entering the intersection

Explanation

A steady green circular light permits you to drive through the intersection, including turning, provided you yield to pedestrians in the crosswalk and to any vehicles already lawfully within the intersection. The light grants permission but never the right of way over those already there.

Question 27Traffic Signals, Signs, and Road Markings

A traffic signal shows a steady yellow circular light as you approach an intersection. What is the correct response?

  1. Treat it exactly like a stop sign and come to a full stop in all cases
  2. Speed up to clear the intersection before it turns red
  3. Continue at the same speed because yellow means the light is about to turn green
  4. Stop before the intersection if you can do so safely, otherwise proceed with caution Correct answer.

Explanation

A steady yellow light warns that the signal is changing to red. You should stop before the intersection if you can do so safely; if you are too close to stop safely, proceed through with caution.

Question 28Traffic Signals, Signs, and Road Markings

A steady red circular traffic light is displayed and you want to turn right at the intersection. Under Nebraska rules, what may you do?

  1. Turn right immediately without stopping if no traffic is visible
  2. Wait for a green arrow before any right turn is legal
  3. Turn right only after the vehicle behind you sounds its horn
  4. Turn right after coming to a complete stop, yielding to pedestrians and traffic, unless a sign prohibits it Correct answer.

Explanation

A right turn on a steady red circular light is permitted after a full stop, provided you yield to pedestrians and cross traffic and no sign prohibits the turn. The stop is mandatory before the turn is made.

Question 29Traffic Signals, Signs, and Road Markings

A traffic signal shows a steady green arrow pointing left. What does this mean for a driver in the left-turn lane?

  1. Left turns are prohibited until the arrow changes to red
  2. You must stop and wait for a circular green light before turning
  3. You may turn left, and oncoming traffic facing a red light must yield to you Correct answer.
  4. You may turn left only after yielding to all oncoming traffic

Explanation

A green left-turn arrow gives protected right of way for the turn; oncoming traffic is held by a red light. You may complete the left turn without yielding to opposing through traffic, though you should still watch for pedestrians and hazards.

Question 30Traffic Signals, Signs, and Road Markings

You are approaching an intersection where the traffic signal is flashing yellow. What does this require of you?

  1. Treat the intersection as a four-way stop
  2. Stop only if another vehicle is already in the intersection
  3. Come to a complete stop before entering the intersection
  4. Slow down and proceed with caution, yielding as needed Correct answer.

Explanation

A flashing yellow signal means caution: slow down and proceed carefully, yielding to traffic and pedestrians as necessary. It does not require a full stop the way a flashing red does.

Question 31Traffic Signals, Signs, and Road Markings

A lane control signal above your lane shows a red X. What does this mean?

  1. The lane is reserved for buses and you may use it if no bus is present
  2. You may use the lane only when passing another vehicle
  3. The lane is closed to your traffic and you should move to another lane Correct answer.
  4. The lane is open but has a lower speed limit

Explanation

A red X over a lane means that lane is closed to traffic in your direction, often because of a crash, road work, or oncoming traffic use. You should change lanes safely rather than enter it.

Question 32Traffic Signals, Signs, and Road Markings

A downward-pointing green arrow above a highway lane indicates what?

  1. The lane is open for travel in your direction Correct answer.
  2. The lane leads only to an exit ramp
  3. The lane must be exited within 500 feet
  4. The lane is reserved for high-occupancy vehicles

Explanation

A downward green arrow on a lane control signal means the lane is open and may be used for travel in your direction. It is the counterpart to the red X that closes a lane.

Question 33Traffic Signals, Signs, and Road Markings

A rectangular white sign with black symbols and the word "ONLY" beneath a straight-ahead arrow is posted over a lane. What does it require?

  1. Traffic in that lane must merge right before the intersection
  2. All traffic in that lane must continue straight through the intersection Correct answer.
  3. Traffic in that lane must turn left at the intersection
  4. Traffic in that lane may turn or go straight at the driver's choice

Explanation

An overhead sign showing a directional arrow with "ONLY" designates that lane for a single movement. With a straight arrow, vehicles in that lane must proceed straight through the intersection.

Question 34Traffic Signals, Signs, and Road Markings

A yellow diamond-shaped sign shows a black symbol of a traffic signal. What should you expect ahead?

  1. A railroad crossing with gates
  2. A stop sign at a hidden intersection
  3. A traffic signal controlling the intersection ahead Correct answer.
  4. A pedestrian crossing with no signal

Explanation

A yellow warning sign depicting a traffic signal warns that a signal-controlled intersection is ahead, often where sight distance is limited. Drivers should be prepared to stop if the light is red.

Question 35Traffic Signals, Signs, and Road Markings

A yellow diamond sign shows a black symbol of a lane merging from the right. What does this warn you about?

  1. A right turn lane is ending ahead
  2. A lane will end and traffic must merge left
  3. The right shoulder is closed to all traffic
  4. Traffic will enter your roadway from the right and merge with yours Correct answer.

Explanation

A merge warning sign indicates that traffic from an entrance ramp or side road will join your lane from the direction shown. You should adjust speed and position to allow a safe merge.

Question 36Traffic Signals, Signs, and Road Markings

A yellow diamond-shaped sign with a black symbol showing a truck on a downgrade warns of what?

  1. A tunnel with height restrictions
  2. A weigh station requiring all vehicles to stop
  3. A steep hill where heavy vehicles may travel slowly Correct answer.
  4. A truck route that passenger cars may not use

Explanation

The hill warning sign alerts drivers to a steep grade ahead, where trucks and other heavy vehicles may be moving slowly in low gear. Drivers should be prepared to adjust speed and avoid passing unsafely.

Question 37Traffic Signals, Signs, and Road Markings

A fluorescent yellow-green diamond sign shows a black symbol of children running. What does this indicate?

  1. A park entrance where children may be present only on weekends
  2. A playground closed to vehicle traffic
  3. A bicycle route shared with pedestrians
  4. A school zone or school crossing where children may be present Correct answer.

Explanation

Fluorescent yellow-green is used for pedestrian and school warnings. The children symbol warns of a school zone or school crossing where children may enter the roadway, so drivers should slow down and watch carefully.

Question 38Traffic Signals, Signs, and Road Markings

A white rectangular sign with black lettering reads "NO RIGHT TURN." What does this sign do?

  1. Suggests that a right turn is unsafe but remains optional
  2. Prohibits right turns at that location Correct answer.
  3. Warns that a right turn lane is closed temporarily
  4. Requires a right turn at the next intersection

Explanation

White rectangular signs with black lettering are regulatory and state a requirement or prohibition. "NO RIGHT TURN" means a right turn is not permitted at that location.

Question 39Traffic Signals, Signs, and Road Markings

An orange diamond-shaped sign with black lettering and a symbol of a worker appears along your route. What should you expect?

  1. A reduced speed limit that applies only at night
  2. Road work or construction activity ahead, possibly with workers on the road Correct answer.
  3. A detour that all traffic must follow
  4. A permanent hazard that applies in all weather

Explanation

Orange signs mark construction and maintenance zones. The worker symbol warns that people may be on or near the roadway, so drivers should slow down and be ready to stop or shift lanes.

Question 40Traffic Signals, Signs, and Road Markings

A blue rectangular sign with a white symbol of a wheelchair indicates what?

  1. A hospital emergency entrance requiring all traffic to stop
  2. A rest area with accessible facilities only
  3. A pedestrian zone closed to vehicles
  4. A parking space reserved for persons with disabilities who display a permit Correct answer.

Explanation

Blue signs with the wheelchair symbol mark accessible parking reserved for vehicles displaying a valid disability permit. Parking there without a permit can result in a citation.

Question 41Traffic Signals, Signs, and Road Markings

A yellow diamond sign shows a black symbol of a divided highway ending, with two lanes merging into one roadway. What does this warn?

  1. An exit ramp will split from the highway
  2. A median will begin and separate opposing traffic
  3. A one-way street will become two-way
  4. The divided roadway will end and opposing traffic will share the road ahead Correct answer.

Explanation

The divided highway ends sign warns that the median or separation will end, so oncoming traffic may soon share the same roadway. Drivers should be alert for opposing vehicles and adjust position accordingly.

Question 42Traffic Signals, Signs, and Road Markings

A white rectangular sign with black lettering reads "KEEP RIGHT" beside a raised median. What does it require?

  1. Drive to the right of the median or obstacle Correct answer.
  2. Turn right at the next intersection
  3. Merge right only when a lane ends
  4. Yield to traffic approaching from the right

Explanation

A "KEEP RIGHT" sign directs traffic to pass to the right side of a median, island, or other obstruction. It is a regulatory instruction about which side to use, not a turn requirement.

Question 43Traffic Signals, Signs, and Road Markings

Yellow diagonal stripes painted on the pavement inside a striped area bordered by solid lines indicate what?

  1. A lane where passing is permitted
  2. A shoulder where parking is allowed
  3. A bicycle lane separated from traffic
  4. A painted median or gore area that vehicles should not enter Correct answer.

Explanation

Diagonal yellow stripes mark a painted median, gore, or buffer area that separates traffic movements. Drivers should not drive across or stop in these striped areas except when necessary to avoid a hazard.

Question 44Traffic Signals, Signs, and Road Markings

A solid white line marks the right edge of the travel lane, and beyond it is a paved shoulder. What does the solid white edge line indicate?

  1. A lane where passing on the right is encouraged
  2. The start of a bicycle lane in all cases
  3. A boundary that vehicles may cross freely at any time
  4. The right edge of the roadway, with the shoulder beyond it Correct answer.

Explanation

A solid white edge line marks the right boundary of the travel lane, separating it from the shoulder. Drivers generally stay within the line except when stopping, turning, or in an emergency.

Question 45Traffic Signals, Signs, and Road Markings

A crosswalk at an intersection is marked by two parallel white lines with no other markings. What do these lines identify?

  1. A stop line for vehicles turning right
  2. A parking area reserved for delivery vehicles
  3. A loading zone for buses
  4. A pedestrian crossing area where drivers must yield to pedestrians Correct answer.

Explanation

Parallel white lines mark a crosswalk, the portion of the roadway set aside for pedestrians crossing. Drivers must yield to pedestrians in the crosswalk and should not block it.

Question 46Traffic Signals, Signs, and Road Markings

You approach a crosswalk marked with a wide solid white stop line before it. Where must you stop when required?

  1. Before the stop line, so the crosswalk remains clear Correct answer.
  2. Anywhere within the crosswalk if no pedestrians are present
  3. Past the stop line but before the crosswalk
  4. With the front of your vehicle on the stop line

Explanation

The stop line marks where vehicles must stop for a signal, stop sign, or pedestrian crossing. You should stop before the line so the crosswalk and intersection remain unobstructed.

Question 47Traffic Signals, Signs, and Road Markings

A white diamond symbol is painted in a lane approaching an intersection. What does this marking mean?

  1. The lane is reserved for high-occupancy vehicles during certain hours Correct answer.
  2. The lane ends ahead and traffic must merge
  3. The lane is for bicycles only
  4. The lane is closed to all traffic

Explanation

A white diamond painted in a lane marks an HOV lane, reserved for vehicles meeting occupancy requirements during posted hours. Signs nearby state the hours and required number of occupants.

Question 48Traffic Signals, Signs, and Road Markings

A yellow diamond sign shows a black symbol of a curve to the left with a smaller advisory speed plate reading 25 MPH below it. What does the advisory speed mean?

  1. The minimum speed you must maintain through the curve
  2. The maximum safe speed for the curve under good conditions Correct answer.
  3. A speed limit enforced by citation at all times
  4. The speed limit that applies only to trucks

Explanation

An advisory speed plate on a curve warning sign states the maximum speed considered safe for the curve under favorable conditions. It is a recommendation based on curve geometry, and drivers should slow to it, especially in poor weather.

Question 49Traffic Signals, Signs, and Road Markings

A yellow diamond sign shows a black symbol of two arrows pointing in opposite directions on the same roadway. What does this indicate?

  1. A divided highway with separated lanes
  2. Two-way traffic ahead on a roadway that may have been one-way Correct answer.
  3. A roundabout with circulating traffic
  4. A lane reserved for passing

Explanation

The two-way traffic warning sign alerts drivers that a roadway previously traveled in one direction now carries traffic in both directions. Drivers should keep right and watch for oncoming vehicles.

Question 50Traffic Signals, Signs, and Road Markings

You are driving at night and the pavement markings ahead are difficult to see. Which marking feature is designed to help you identify lane lines in the dark?

  1. Diagonal stripes painted in the center of each lane
  2. Raised reflective pavement markers and retroreflective paint Correct answer.
  3. Text painted on the shoulder
  4. Painted arrows that glow only in daylight

Explanation

Pavement markings use retroreflective materials, and raised markers reflect headlights to outline lanes in darkness and bad weather. These features help drivers track lane boundaries when paint alone is hard to see.