I85PREP
⌘ K
NY CDL Passenger study materials
NY CDL Passenger study resources

NY CDL Passenger practice questions

One question at a time. Build your NY CDL Passenger understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Driving Safely

Before backing a passenger-carrying bus, the driver should first do which of the following?

  1. Ask a passenger to watch from a window
  2. Rely on the rear camera alone
  3. Walk around the vehicle to check for obstructions and people Correct answer.
  4. Sound the horn continuously and back immediately

Explanation

A pre-trip walk-around lets the driver see obstacles, pedestrians, and low objects that mirrors and cameras may miss. The area directly behind a large bus is a blind spot, so a visual check before moving is required.

Question 2Driving Safely

When driving a bus at highway speed, the following distance should generally be at least how long under ideal conditions?

  1. Four seconds Correct answer.
  2. One second
  3. Ten seconds
  4. Two seconds

Explanation

Large commercial vehicles need a longer cushion than cars because of mass and stopping distance. Under ideal conditions a minimum of about four seconds behind the vehicle ahead is the standard guideline.

Question 3Driving Safely

When must a driver of a passenger bus use a seat belt?

  1. At all times while operating the vehicle Correct answer.
  2. Only on highways above 55 mph
  3. Only when passengers are not aboard
  4. Only when the bus is empty

Explanation

Federal and state rules require commercial drivers to wear seat belts whenever the vehicle is in operation. Passenger presence, speed, and load do not change the requirement.

Question 4Driving Safely

A bus driver approaching a railroad crossing with no gate and a stop sign must do what?

  1. Follow the vehicle ahead through the crossing
  2. Sound the horn and cross without stopping
  3. Slow down and proceed if no train is visible
  4. Stop, listen, and look both ways before crossing Correct answer.

Explanation

At a passive crossing controlled by a stop sign, the bus must come to a complete stop, open the window if needed, and look and listen for trains. Only after confirming the tracks are clear may the driver proceed.

Question 5Driving Safely

On a slippery road, the recommended way to brake a bus without ABS is to:

  1. Apply firm steady pressure just short of lockup Correct answer.
  2. Press the pedal to the floor and hold it
  3. Pump the pedal rapidly and repeatedly
  4. Shift to neutral and coast to a stop

Explanation

Squeeze braking applies steady pressure that slows the wheels without locking them, preserving steering control. Locked wheels cause a skid and loss of directional control.

Question 6Driving Safely

Hydroplaning is most likely to begin when a bus is traveling at:

  1. Low speeds on gravel
  2. Any speed on dry pavement
  3. Idle speed in a parking lot
  4. Higher speeds on wet pavement with worn tires Correct answer.

Explanation

Hydroplaning occurs when water builds up under the tires faster than the tread can channel it away, which happens at higher speeds on wet roads, especially with worn tires. Reducing speed is the primary defense.

Question 7Driving Safely

What is the correct action when a bus starts to skid on ice?

  1. Steer in the direction you want the front of the bus to go and ease off the accelerator Correct answer.
  2. Turn the wheel sharply opposite the skid
  3. Accelerate to pull out of the skid
  4. Brake hard and turn away from the skid

Explanation

Steering where you want the vehicle to go helps the front tires regain grip, and easing off the accelerator reduces the forces causing the slide. Hard braking or sharp counter-steering can worsen the skid.

Question 8Driving Safely

A bus driver's eyes should be focused how far ahead during normal driving?

  1. Twelve to fifteen seconds ahead Correct answer.
  2. Directly over the hood
  3. About one bus length ahead
  4. Only on the vehicle in front

Explanation

Looking well ahead lets the driver spot hazards, plan lane changes, and brake smoothly. Twelve to fifteen seconds of travel distance is the standard aiming point for commercial driving.

Question 9Driving Safely

When a passenger bus is being passed by another vehicle, the bus driver should:

  1. Maintain speed and stay in the lane Correct answer.
  2. Flash the headlights to warn oncoming traffic
  3. Move to the shoulder to let it by
  4. Speed up to keep the passing vehicle alongside

Explanation

The vehicle being passed should hold a steady speed and lane position so the passing driver can complete the maneuver predictably. Speeding up or swerving creates a hazard.

Question 10Driving Safely

How should a driver adjust following distance when driving a bus in heavy rain?

  1. Keep the same distance as in dry weather
  2. Follow the tail lights of the vehicle ahead closely
  3. Increase the gap to allow for longer stopping distance Correct answer.
  4. Decrease the gap to avoid other vehicles cutting in

Explanation

Wet pavement reduces traction and lengthens stopping distance, so the following gap must be increased. Tailgating in rain leaves no margin for a sudden stop.

Question 11Driving Safely

A bus driver who becomes drowsy during a long trip should:

  1. Open a window and continue driving
  2. Drink coffee and drive faster to arrive sooner
  3. Turn up the radio and keep going
  4. Stop in a safe place and rest Correct answer.

Explanation

Fatigue impairs reaction time and judgment, and the only reliable remedy is rest. Fresh air, music, or caffeine do not reverse drowsiness.

Question 12Driving Safely

The posted speed limit on a road is 55 mph, but the bus is heavily loaded and the road is curving. The driver should:

  1. Match the speed of the fastest surrounding traffic
  2. Exceed the limit to maintain momentum
  3. Drive below the posted limit to match conditions Correct answer.
  4. Drive at 55 mph because it is legal

Explanation

Speed limits are maximums for ideal conditions, not targets. A loaded bus on a curve needs a lower speed to stay in control.

Question 13Driving Safely

Which lights should be used when a bus is driven in fog during daylight?

  1. Parking lights only
  2. High-beam headlights
  3. Low-beam headlights Correct answer.
  4. Hazard flashers while moving at speed

Explanation

Low beams aim light down at the road, reducing glare reflected back by fog. High beams bounce light off the moisture and worsen visibility.

Question 14Driving Safely

A bus driver must yield the right of way to an emergency vehicle approaching with siren and lights by:

  1. Pulling to the right edge of the roadway and stopping until it passes Correct answer.
  2. Stopping in the middle of the intersection
  3. Speeding up to clear the area
  4. Continuing at the same speed and lane

Explanation

Drivers must clear the path of an emergency vehicle by moving to the right and stopping until it passes, unless doing so would create another hazard. Blocking an intersection or continuing normally obstructs the response.

Question 15Driving Safely

When a bus must cross a bridge with a posted weight limit lower than the loaded bus weight, the driver should:

  1. Not cross and find another route Correct answer.
  2. Cross only if no other vehicles are on the bridge
  3. Cross in the center lane for support
  4. Cross slowly to reduce the load

Explanation

Posted weight limits reflect the structural capacity of the bridge, and speed or lane position does not reduce the actual weight. The driver must avoid the bridge and use an alternate route.

Question 16Driving Safely

A bus is stopped at a red light on a steep downgrade. To prevent rolling backward, the driver should:

  1. Rely on the transmission in neutral
  2. Use only the engine brake
  3. Hold the bus with the parking brake or service brake Correct answer.
  4. Let the bus roll back slightly before accelerating

Explanation

On a grade, the brakes must hold the vehicle until it moves forward. Neutral removes engine holding power, and rolling back can strike a vehicle behind.

Question 17Driving Safely

When is it acceptable to use the engine (Jacobs) brake in a residential area?

  1. Only where local rules permit and noise is not prohibited Correct answer.
  2. Whenever descending a hill
  3. Never, because engine brakes are illegal
  4. At all times to save the service brakes

Explanation

Engine brake use is governed by local ordinances that often restrict it in residential areas because of noise. Drivers must follow posted rules and use service brakes where engine braking is banned.

Question 18Driving Safely

When sharing the road with motorcyclists near a bus, the driver should remember that:

  1. Motorcycles cannot legally pass a bus
  2. Motorcycles stop more quickly than a bus and need extra following room Correct answer.
  3. Motorcycles are required to yield to buses at all times
  4. Motorcycles are easy to see in mirrors at all times

Explanation

Motorcycles can stop in a shorter distance than a heavy bus, so a following bus must leave extra space to avoid a rear-end collision. They also fit into blind spots easily and must be checked for carefully.

Question 19Driving Safely

A bus driver preparing to turn right at a corner should:

  1. Turn from the left lane for a wider arc
  2. Rely on the rear camera only
  3. Swing wide to the left before turning
  4. Check the right mirror and blind spot for pedestrians and cyclists, then turn from the proper lane Correct answer.

Explanation

Right turns in a large vehicle require a check of the right side for pedestrians and cyclists who may be alongside. Turning from the correct lane and checking the right mirror prevents a squeeze crash.

Question 20Driving Safely

The distance a bus needs to stop is affected most by which combination?

  1. Number of mirrors
  2. Perception time only
  3. Speed and weight of the vehicle Correct answer.
  4. Color of the vehicle

Explanation

Stopping distance grows with speed and with the mass being carried, since both increase the energy that must be dissipated. Perception time matters but is only one part of the total.

Question 21Driving Safely

When driving through a work zone with narrowed lanes, a bus driver should:

  1. Maintain highway speed to clear the zone quickly
  2. Change lanes repeatedly to find a faster path
  3. Reduce speed and increase following distance Correct answer.
  4. Ignore flaggers if traffic is light

Explanation

Work zones have reduced clearances, uneven surfaces, and workers near the travel lane, so slowing down and opening a gap gives time to react. Flaggers and posted limits must be obeyed.

Question 22Driving Safely

A bus driver's vehicle is involved in a crash with injuries. Which action comes first?

  1. Move the passengers to another bus before checking injuries
  2. Exchange insurance information and leave
  3. Continue to the next stop to stay on schedule
  4. Stop, secure the scene, and call for emergency help Correct answer.

Explanation

After a crash the driver must stop, protect the scene, and summon emergency medical help for the injured. Leaving the scene or moving passengers before assessing injuries can worsen outcomes.

Question 23Driving Safely

The proper use of a bus's convex (spot) mirrors is to:

  1. Replace the flat mirrors entirely
  2. Measure exact distances behind the bus
  3. Show a wider view of the sides and front corners, with objects appearing closer than they are Correct answer.
  4. Watch passengers inside the bus

Explanation

Convex mirrors widen the field of view around the bus but distort distance, making objects look farther away than they really are. Drivers must check both flat and convex mirrors before maneuvering.

Question 24Driving Safely

When a bus driver must drive through deep water covering the roadway, the safest choice is to:

  1. Follow a smaller car through the water
  2. Stop and find another route if the depth is uncertain Correct answer.
  3. Drive through quickly to avoid stalling
  4. Coast through in neutral

Explanation

Water can hide washouts and can stall or float a heavy vehicle, and depth is hard to judge. If the depth is unknown, the safe decision is to turn around and use another route.

Question 25Driving Safely

Before descending a long, steep grade, the driver of a loaded bus should:

  1. Put the transmission in neutral to save fuel
  2. Rely on the service brakes the entire way down
  3. Select a lower gear and check the brakes before starting down Correct answer.
  4. Descend at the highest safe speed to finish quickly

Explanation

Selecting a lower gear before the descent uses engine braking to control speed and prevents the service brakes from overheating. Brakes should be checked before the grade, and neutral is never used for descending.

Question 26Driving Safely

Under New York rules for passenger-carrying vehicles, which statement best describes when the driver may allow passengers to stand in the aisle while the bus is moving?

  1. Standing is permitted whenever every seat is occupied, regardless of speed
  2. Standing is allowed whenever the driver announces it over the public address system
  3. Standing is allowed only if the trip stays below 30 mph on city streets
  4. Standing is not permitted while the bus is in motion except as specifically allowed for transit-type service Correct answer.

Explanation

The general safety rule for carrying passengers is that riders must be seated and the aisle kept clear while the vehicle is moving, because a standing passenger has no restraint and can be thrown during a stop or swerve. Limited exceptions exist for transit-style operations where standing passengers are expressly authorized, but a charter or school-type bus driver cannot simply decide to allow it. The driver is responsible for securing passengers before pulling away from a stop.

Question 27Driving Safely

A bus driver is approaching a railroad crossing with no gates and no flashing signals. What is the required procedure before crossing the tracks?

  1. Stop, open the door or window, look and listen both ways, and cross only when clear Correct answer.
  2. Slow to about 15 mph and proceed without stopping if no train is visible
  3. Sound the horn continuously from 100 feet before the crossing until the bus is past the tracks
  4. Stop only if the bus is carrying passengers or hauling flammable material

Explanation

At a passive crossing without gates or lights, the driver must come to a complete stop, open a window or door to listen, and look carefully in both directions before proceeding. A bus carries many lives and cannot stop quickly, so a rolling check at low speed is not enough. The bus should cross only when the driver is certain no train is approaching.

Question 28Driving Safely

While driving a bus on a multi-lane highway, the driver notices smoke and the smell of burning rubber coming from a rear wheel area. What is the safest immediate response?

  1. Pull off the roadway as soon as it is safe, stop, and evacuate passengers away from the vehicle Correct answer.
  2. Continue at reduced speed to the next scheduled stop to avoid delaying passengers
  3. Shift to a lower gear and use engine braking to cool the brakes
  4. Accelerate to reach an exit ramp where the shoulder is wider

Explanation

Smoke and a burning-rubber odor suggest an overheated wheel, dragging brake, or tire fire, any of which can rapidly escalate. The driver should get the bus off the travel lane at the first safe opportunity, stop, shut down, and move passengers well away and upwind of the vehicle. Continuing to a scheduled stop risks a fire spreading while the bus is loaded.

Question 29Driving Safely

A bus driver is backing the vehicle in a terminal lot where no spotter is available. Which practice is most consistent with safe backing?

  1. Back with the left mirror folded in so the driver can look directly out the window
  2. Have a passenger stand at the rear door and shout directions to the driver
  3. Back only after walking around the bus to check for obstructions and using mirrors continuously while backing slowly Correct answer.
  4. Rely on the backup alarm to warn anyone behind and back at normal walking speed

Explanation

Backing a large bus is one of the highest-risk maneuvers because of blind areas directly behind the vehicle. When no trained spotter is present, the driver should first walk around the bus to confirm the path is clear, then back slowly while checking both mirrors and stopping if visibility is lost. The backup alarm helps but does not guarantee that people hear or heed it.

Question 30Driving Safely

A bus driver must stop on the shoulder of a rural highway to check a mechanical problem. Which action best protects passengers and other traffic?

  1. Stop as far onto the shoulder as possible, set the parking brake, and turn on hazard warning flashers Correct answer.
  2. Stop on the shoulder and turn off all exterior lights to avoid confusing other drivers
  3. Leave the bus in gear with the parking brake released so it can be moved quickly
  4. Stop in the travel lane and turn on the left turn signal to warn following traffic

Explanation

A disabled or stopped bus should be moved as far off the traveled way as conditions allow, held with the parking brake, and marked with four-way hazard flashers so approaching drivers see it early. Passengers should generally remain aboard unless there is a fire or other reason to evacuate, and if they do exit they should be kept away from traffic. Lighting the vehicle makes it visible rather than hiding it.

Question 31Driving Safely

When a bus driver uses the S-turn method to make a tight right turn at a corner, what is the purpose of that technique?

  1. To increase speed through the intersection before oncoming traffic arrives
  2. To keep the rear wheels from striking the curb or a pedestrian on the inside of the turn Correct answer.
  3. To shorten the turning radius so the bus stays entirely in the right lane
  4. To allow the bus to turn without signaling because the maneuver is obvious

Explanation

A long bus cuts the corner because the rear wheels track inside the path of the front wheels, a condition called off-tracking. The S-turn technique swings the bus slightly left before turning right so the rear wheels clear the curb and anyone standing near it. The driver still signals and checks the right mirror throughout the turn.

Question 32Driving Safely

A bus driver is descending a long mountain grade with a full load of passengers. Which combination of practices best controls speed and brake temperature?

  1. Shift to neutral to let the bus coast and use the brakes only at curves
  2. Ride the service brakes lightly and continuously to hold a steady speed
  3. Select a lower gear before the descent, use engine braking, and apply service brakes firmly in short applications Correct answer.
  4. Descend in the highest gear so the engine runs cool and use the parking brake if speed builds

Explanation

A loaded bus gains speed quickly on a grade, and continuous light braking overheats the drums, causing fade. The driver should choose a lower gear at the top of the grade so engine braking helps hold speed, then use the service brakes in firm, short applications that allow them to cool between uses. Coasting in neutral or using the parking brake removes control and is dangerous.

Question 33Driving Safely

A passenger bus driver is pulling away from a curb on a busy street. What is the correct sequence before moving into the traffic lane?

  1. Sound the horn and pull out immediately so following traffic does not close the gap
  2. Rely on other drivers to slow down because a bus leaving a stop has the right of way
  3. Signal, check mirrors and the left blind area, then move out gradually when the lane is clear Correct answer.
  4. Move out first and signal once the bus is already in the lane

Explanation

A bus re-entering traffic from a stop does not have an automatic right of way over vehicles already in the lane. The driver must signal the intention, check both mirrors and the blind area beside the bus, and wait for a safe gap before easing into the lane. Signaling after the fact or forcing a gap creates a collision risk with passing vehicles.

Question 34Driving Safely

A bus is traveling at highway speed when a front tire suddenly fails. Which driver action gives the best chance of maintaining control?

  1. Turn the wheel sharply toward the shoulder to get off the road quickly
  2. Brake hard immediately and steer toward the shoulder
  3. Accelerate briefly to stabilize the bus, then shift to a lower gear
  4. Hold the steering wheel firmly, keep the bus straight, ease off the accelerator, and slow gradually before pulling off Correct answer.

Explanation

A sudden front-tire failure pulls the steering and can cause a driver to overcorrect. The safe response is a firm grip on the wheel, keeping the bus traveling straight while easing off the accelerator so speed bleeds off gradually. Hard braking or sharp steering can cause a loss of control or a rollover, especially with a loaded bus.

Question 35Transporting Passengers Safely

Under federal CDL passenger-carrying rules, which condition disqualifies a driver from operating a bus carrying passengers?

  1. Being under 21 years of age for interstate operation Correct answer.
  2. Having a current DOT medical examiner's certificate
  3. Passing a pre-trip inspection before departure
  4. Having a valid Class B CDL with a passenger endorsement

Explanation

Interstate passenger-carrying operations require the driver to be at least 21 years old and to hold a CDL with the proper passenger endorsement. Being under 21 therefore disqualifies a driver from interstate passenger operations. The other listed conditions are requirements, not disqualifiers.

Question 36Transporting Passengers Safely

Before transporting passengers, what must a driver confirm about the bus during the pre-trip inspection?

  1. That the emergency exits open and close properly Correct answer.
  2. That the fare box is full of change
  3. That the luggage racks are empty
  4. That the radio has been programmed

Explanation

A pre-trip inspection must confirm that safety equipment, including emergency exits, is functioning. Emergency exits that will not open can trap passengers in a crash or fire. Fare boxes, radios, and luggage racks are not safety-critical inspection items.

Question 37Transporting Passengers Safely

When should a passenger bus driver activate the four-way flashers while stopping to load or unload passengers?

  1. Only after the bus has come to a complete stop
  2. While slowing and stopped, as required by law in most situations Correct answer.
  3. Only when the bus is parked on a shoulder
  4. Never, because flashers confuse other drivers

Explanation

Four-way flashers warn following traffic that the bus is slowing and stopping to load or unload passengers. They should be on while slowing and while stopped, not only after the stop is complete. This warning helps prevent rear-end collisions at passenger stops.

Question 38Transporting Passengers Safely

Why must a driver check that standees do not block the aisle or stepwells?

  1. To reduce engine load
  2. To allow rapid evacuation and safe movement in an emergency Correct answer.
  3. To make fare collection easier
  4. To keep the bus within its weight rating

Explanation

An aisle blocked by standing passengers can prevent rapid evacuation during a fire, crash, or other emergency. Keeping the aisle and stepwells clear allows passengers to exit quickly. Weight, fares, and engine load are unrelated to this rule.

Question 39Transporting Passengers Safely

What is the primary purpose of the passenger endorsement on a CDL?

  1. It authorizes hauling hazardous materials
  2. It authorizes towing double trailers
  3. It authorizes operation of vehicles designed to carry 16 or more passengers, including the driver Correct answer.
  4. It authorizes driving school buses only

Explanation

The passenger endorsement qualifies a CDL holder to drive vehicles designed to carry 16 or more people, including the driver. It does not cover hazardous materials or double trailers, which have their own endorsements. School buses require an additional school bus endorsement.

Question 40Transporting Passengers Safely

A bus driver is about to leave a stop when a passenger is still standing and walking toward a seat. What should the driver do?

  1. Wait until the passenger is seated or securely braced before moving Correct answer.
  2. Sound the horn to hurry the passenger
  3. Ask another passenger to hold the standing person
  4. Pull out slowly so the passenger can keep walking

Explanation

Moving while a passenger is still on their feet can cause a fall, especially during acceleration or a sudden stop. The driver should wait until the passenger is seated or holding a secure handhold. Hurrying the passenger increases the risk of injury.

Question 41Transporting Passengers Safely

Which behavior is required of passengers regarding the bus aisle while the bus is moving?

  1. They must keep the aisle clear and remain seated or in designated standing areas Correct answer.
  2. They may block the rear exit for comfort
  3. They may sit on the steps near the door
  4. They may stand in the aisle if holding a handrail

Explanation

Passengers must keep the aisle clear and stay seated or in designated standing areas while the bus moves. Blocking the aisle or exits can prevent evacuation and cause falls. Standing in the aisle or on steps is unsafe.

Question 42Transporting Passengers Safely

What should a driver do if a passenger becomes unruly and threatens other riders?

  1. Stop the bus in a safe place and address the situation, calling for help if needed Correct answer.
  2. Continue the route and ignore the behavior
  3. Open the door and order the passenger off while the bus is moving
  4. Speed up to reach the terminal faster

Explanation

An unruly or threatening passenger endangers everyone aboard, so the driver should stop safely and handle the situation, calling law enforcement or dispatch if necessary. Ignoring the behavior or speeding increases danger. Removing someone while the bus is moving is unsafe.

Question 43Transporting Passengers Safely

A bus must stop on a railroad crossing because of traffic ahead. What is the correct action?

  1. Never stop on the crossing; wait until there is room to clear it completely Correct answer.
  2. Back up off the crossing after stopping
  3. Stop on the crossing and wait for traffic to clear
  4. Stop only if a train is visible

Explanation

A driver should never enter a railroad crossing unless there is enough space to clear it completely. Stopping on the tracks risks a collision with a train. Waiting before the crossing keeps the vehicle and passengers out of danger.

Question 44Transporting Passengers Safely

Before backing a passenger bus, what is the safest procedure?

  1. Rely on the mirrors alone and back quickly
  2. Honk once and back without looking
  3. Ask passengers to watch from their seats
  4. Use a spotter when available, check all sides, and back slowly Correct answer.

Explanation

Backing a large bus has serious blind spots, so a driver should use a spotter when one is available and check all sides before moving slowly. Mirrors alone leave blind areas. Passengers seated inside cannot reliably see behind the bus.

Question 45Transporting Passengers Safely

What is the correct way to handle a passenger who uses a wheelchair and the bus has a lift?

  1. Ask the passenger to board using the steps
  2. Operate the lift properly and secure the wheelchair as required Correct answer.
  3. Leave the lift down while driving
  4. Require the passenger to transfer to a seat without assistance

Explanation

Passengers using mobility devices must be accommodated with a properly operated lift and the wheelchair secured for travel. Forcing a transfer or using steps denies the required accommodation and risks injury. The lift must be stowed before moving.

Question 46Transporting Passengers Safely

How should a driver manage a passenger who is intoxicated and disruptive before boarding?

  1. Board the passenger but confiscate personal items
  2. Board the passenger only if seated in the rear
  3. Refuse boarding if the passenger poses a safety risk, following company policy Correct answer.
  4. Allow boarding and monitor the passenger

Explanation

A driver may refuse to board a passenger whose condition creates a safety risk, consistent with company policy. Allowing a disruptive or intoxicated person aboard endangers others. Confiscating items or seating location does not resolve the risk.

Question 47Transporting Passengers Safely

When must a driver use the parking brake before leaving the driver's seat?

  1. Only if passengers remain aboard
  2. Whenever the bus is stopped and the driver leaves the controls Correct answer.
  3. Only at the end of the day
  4. Only when parked on a hill

Explanation

The parking brake must be set whenever the driver leaves the controls, regardless of grade, so the bus cannot roll. Relying on the grade or time of day is unsafe. Passengers remaining aboard does not change the requirement.

Question 48Transporting Passengers Safely

What is the purpose of a bus evacuation drill for passengers?

  1. To test the engine's power
  2. To check fare compliance
  3. To measure fuel efficiency
  4. To prepare passengers to exit quickly and safely in an emergency Correct answer.

Explanation

Evacuation drills teach passengers how to use exits and leave the bus quickly and safely during an emergency. They do not test engine power, fares, or fuel use. Regular drills improve order and speed during a real evacuation.

Question 49Transporting Passengers Safely

A fire breaks out in the engine compartment of a moving bus full of passengers. What should the driver do first?

  1. Continue driving to the terminal
  2. Ask passengers to help extinguish it
  3. Open the hood to inspect the fire
  4. Stop the bus in a safe location and evacuate passengers away from the fire Correct answer.

Explanation

The priority is to stop safely and get passengers off the bus and away from the fire. Continuing to drive or having passengers fight the fire endangers lives. Opening the hood can feed oxygen to the flames.

Question 50Transporting Passengers Safely

How should a driver secure a wheelchair or mobility device for travel?

  1. Ask another passenger to hold the chair
  2. Use the bus's securement system and follow the manufacturer's instructions Correct answer.
  3. Place the wheelchair in the aisle without securing it
  4. Rely on the passenger to hold the brakes

Explanation

Mobility devices must be secured with the bus's approved securement system according to manufacturer instructions. An unsecured chair can slide or tip during a stop. Passenger-held or brake-only approaches do not provide adequate restraint.