I85PREP
⌘ K
Oman ROP Driving Theory (Light) study materials
Oman ROP Driving Theory (Light) study resources

Oman ROP Driving Theory (Light) practice questions

One question at a time. Build your Oman ROP Driving Theory (Light) understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic signs, signals and road markings

On an Omani road you see a circular sign with a red border and the number 80 in black on a white background. What does this sign tell you?

  1. The maximum permitted speed is 80 km/h Correct answer.
  2. The recommended speed in good weather is 80 km/h
  3. The distance to the next exit is 80 kilometres
  4. The minimum permitted speed is 80 km/h

Explanation

A red-bordered circle is a regulatory prohibition sign, and a number inside it sets the maximum legal speed in kilometres per hour. You must not exceed that figure at any point while the sign applies. The limit ends at the next cancellation sign, a new limit sign, or a junction where a different limit is posted.

Question 2Traffic signs, signals and road markings

A sign shows a red circle containing a black car and a red car side by side, with a diagonal red line through it. What is the rule?

  1. Overtaking by any vehicle is prohibited Correct answer.
  2. Parking of private cars is prohibited
  3. Only goods vehicles may not overtake
  4. No entry for all motor vehicles

Explanation

This prohibition sign bans overtaking for all vehicles on the stretch of road it governs. The two cars represent a passing manoeuvre, and the red diagonal slash cancels that manoeuvre. The ban stays in force until a cancellation sign or the end of the restriction is indicated.

Question 3Traffic signs, signals and road markings

You approach a red octagonal sign at a junction. What must you do?

  1. Give way only to traffic approaching from the right
  2. Slow down and continue if the road looks clear
  3. Stop only when another vehicle is visible
  4. Come to a complete stop and give way before proceeding Correct answer.

Explanation

The octagonal shape is reserved for the stop sign, and it is the only sign that requires a full stop regardless of traffic. You must halt at the stop line, or at the edge of the junction if no line is marked, and proceed only when it is safe. A rolling slow-down does not satisfy the requirement.

Question 4Traffic signs, signals and road markings

What does an inverted triangle sign with a red border mean when you see it before a junction?

  1. Traffic on the side road must give way to you
  2. Stop completely before entering the junction
  3. The road ahead is a one-way street
  4. Give way to traffic on the road you are joining Correct answer.

Explanation

The downward-pointing triangle is the give-way sign, warning that you must yield to traffic on the road you are about to enter. You need not stop if the way is clear, but you must be prepared to stop. It is often placed with a broken white give-way line across your lane.

Question 5Traffic signs, signals and road markings

A traffic light shows a steady red light together with a green arrow pointing left. What may you do?

  1. Proceed in the direction of the arrow after giving way Correct answer.
  2. Proceed straight ahead but not turn left
  3. Sound your horn and proceed in any direction
  4. Wait until the red light changes to green before moving

Explanation

A green arrow authorises movement only in the direction it points, even while the main red light is showing. You may turn left, but you must still yield to pedestrians and to traffic already in or entering the road you join. The red light continues to bar all other movements.

Question 6Traffic signs, signals and road markings

At a signalised junction the light turns amber as you approach and you are too close to stop safely. What should you do?

  1. Continue through the junction with care Correct answer.
  2. Stop and wait in the middle of the junction
  3. Brake hard immediately in all cases
  4. Reverse back behind the stop line

Explanation

An amber light means stop unless you are so close that stopping would be unsafe or could cause a collision from behind. In that situation you should carry on across the junction and clear it. Braking sharply when you are already at the line risks a rear-end crash.

Question 7Traffic signs, signals and road markings

A single flashing amber light at a pedestrian crossing means:

  1. Give way to pedestrians on the crossing and proceed when clear Correct answer.
  2. Vehicles have priority over pedestrians
  3. Stop and wait until the light turns green
  4. The crossing is out of order and pedestrians must wait

Explanation

A flashing amber signal at a pedestrian crossing places the duty on drivers to yield to anyone already on the crossing. You may proceed once the crossing is clear of pedestrians. It does not mean the crossing is broken, and it does not give vehicles priority.

Question 8Traffic signs, signals and road markings

A traffic officer controlling a junction raises his arm with the palm facing your direction. How does this affect the red light showing at the same time?

  1. The red light overrides the officer and you may proceed
  2. The officer's signal takes precedence and you must stop Correct answer.
  3. Both signals are equal and you may choose either
  4. The officer's signal applies only to pedestrians

Explanation

Directions given by a police officer on point duty override fixed traffic signals and signs. If the officer signals you to stop, you stop even if the light shows green, and if he waves you on you may proceed despite a red light, provided it is safe. Drivers must always obey the officer first.

Question 9Traffic signs, signals and road markings

What is the meaning of a solid white line running along the centre of a two-way road?

  1. It separates traffic moving in the same direction
  2. Overtaking is allowed if the road ahead is clear
  3. It marks the edge of a parking bay
  4. Vehicles on both sides must not cross or straddle it Correct answer.

Explanation

A continuous centre line prohibits crossing or straddling it, so overtaking that requires moving onto the other side is not allowed. The restriction exists where visibility or road layout makes passing unsafe. A broken line, by contrast, may be crossed when it is safe to do so.

Question 10Traffic signs, signals and road markings

You see a broken white line painted across your lane at the approach to a junction. What does it indicate?

  1. A give-way line where you must yield to traffic Correct answer.
  2. The start of a bus lane
  3. A pedestrian crossing boundary
  4. A stop line where a complete halt is required

Explanation

A broken transverse line marks a give-way point, usually paired with the give-way triangle sign. You must yield to traffic on the road you are joining but need not stop if the way is clear. A solid transverse line, by contrast, marks a stop line.

Question 11Traffic signs, signals and road markings

Yellow box markings in the centre of a junction mean:

  1. The box is reserved for buses only
  2. You may wait in the box during a red light
  3. Do not enter the box unless your exit is clear Correct answer.
  4. Parking is allowed inside the box for short periods

Explanation

A yellow box junction is designed to keep the junction clear so crossing traffic is never blocked. You may enter only if your exit beyond the box is clear, or if you are turning right and are prevented only by oncoming traffic. Waiting inside the box otherwise obstructs the junction.

Question 12Traffic signs, signals and road markings

What do double white lines along the centre of the road, with the line nearest you broken, allow?

  1. You may never cross either line
  2. You may cross only to park on the far side
  3. Only buses may cross the lines
  4. You may cross to overtake when it is safe Correct answer.

Explanation

With double centre lines, the nearer line governs your side of the road. If your side is broken, you may cross to overtake when the road is clear and it is safe. If your side is solid, crossing is prohibited. The arrangement changes when the lines swap sides.

Question 13Traffic signs, signals and road markings

A blue circular sign showing a white arrow pointing straight ahead means:

  1. You must proceed in the direction of the arrow Correct answer.
  2. The arrow shows the direction to the nearest town
  3. The road ahead is closed to traffic
  4. You may turn left or right if you wish

Explanation

Blue circles give mandatory instructions, and an arrow inside one directs you to follow that direction. Unlike a warning sign, it compels a particular course rather than merely advising. Turning contrary to the arrow would be a breach of the instruction.

Question 14Traffic signs, signals and road markings

A red-bordered circle containing a black motorcycle above a black car indicates:

  1. No overtaking by motorcycles
  2. Motorcycles only permitted
  3. No entry for motorcycles Correct answer.
  4. Motorcycles must use the left lane

Explanation

A red circle with a vehicle symbol inside is a prohibition applying to that class of vehicle. The motorcycle symbol means motorcycles may not proceed past the sign. The car underneath simply illustrates that the ban applies in the company of other traffic.

Question 15Traffic signs, signals and road markings

A triangular warning sign shows a black symbol of a car skidding with wavy lines behind it. What hazard does it warn of?

  1. A slippery road surface ahead Correct answer.
  2. A sharp bend to the left
  3. A steep downhill gradient
  4. Loose gravel on the carriageway

Explanation

Triangular signs with a red border give warnings, and the skidding car symbol specifically warns of a slippery surface ahead. You should reduce speed and avoid sudden braking or steering on the affected stretch. The wavy lines represent loss of grip, not the shape of the road.

Question 16Traffic signs, signals and road markings

You see a triangular sign showing two children running. How should you respond?

  1. Maintain speed because the sign is only advisory
  2. Stop and wait for a marshal to wave you through
  3. Reduce speed and watch for children near a school or play area Correct answer.
  4. Sound your horn continuously until past the area

Explanation

This warning sign alerts you to children who may cross unexpectedly near a school, playground or similar area. The correct response is to slow down and be ready to stop, scanning both sides of the road. Warning signs call for anticipation, not for a compulsory halt.

Question 17Traffic signs, signals and road markings

A triangular warning sign shows a black cross symbol. What does it indicate?

  1. A railway level crossing without barriers
  2. A hospital with a first-aid post ahead
  3. A crossroads ahead where you must be alert to joining traffic Correct answer.
  4. A mosque or place of worship ahead

Explanation

The cross-shaped symbol on a warning triangle denotes a crossroads ahead, warning that vehicles may emerge from side roads. You should approach with care and be ready to give way as the junction requires. It is not a religious or medical symbol.

Question 18Traffic signs, signals and road markings

A triangular sign shows a steep downward slope with the figure 10%. What does this tell you?

  1. A steep descent lies ahead and you should control your speed Correct answer.
  2. The speed limit on the descent is 10 km/h
  3. Only vehicles under 10 tonnes may use the road
  4. The road rises by 10 metres over the next kilometre

Explanation

The percentage on a gradient warning sign states the steepness of the slope ahead, not a distance or a speed limit. On a steep descent you should select a lower gear and use engine braking to avoid overheating the brakes. The sign prepares you for a change in the road profile.

Question 19Traffic signs, signals and road markings

Approaching a railway level crossing, you see a red light flashing at the crossing. What must you do?

  1. Sound your horn and cross quickly
  2. Proceed slowly across while checking both ways
  3. Stop only if a train is visible
  4. Stop and wait until the lights stop flashing Correct answer.

Explanation

A flashing red light at a level crossing means a train is approaching and you must stop. You should wait until the lights stop flashing and any barriers are fully raised before crossing. Never attempt to cross while the warning is active, even if no train is yet in sight.

Question 20Traffic signs, signals and road markings

A rectangular green sign with white lettering shows a place name and a distance in kilometres. What type of sign is this?

  1. A direction sign giving route information Correct answer.
  2. A mandatory sign requiring a turn
  3. A regulatory sign imposing a speed limit
  4. A warning sign about a hazard ahead

Explanation

Rectangular signs with place names and distances are direction signs, guiding you along routes rather than imposing rules. Green is commonly used for primary routes and blue for motorways. They do not by themselves require any particular action beyond following the indicated route.

Question 21Traffic signs, signals and road markings

What does a blue rectangular sign with a white symbol of a bus indicate?

  1. A bus stop or bus lane where buses operate Correct answer.
  2. A repair garage for buses
  3. A pedestrian zone closed to buses
  4. A prohibition on buses using the road

Explanation

Blue rectangular signs with a white bus symbol identify bus stops or bus lanes and inform you that buses operate there. Where it marks a bus lane, other vehicles may be restricted from using it during stated hours. The sign is informational, telling you what to expect rather than banning buses.

Question 22Traffic signs, signals and road markings

You are driving and see a sign showing a red circle with a white horizontal bar across it. What does it mean?

  1. No parking at any time
  2. Stop and give way
  3. One-way street in your direction
  4. No entry for vehicular traffic Correct answer.

Explanation

The red circle with a white horizontal bar is the no-entry sign, meaning vehicles may not proceed past it. It is typically placed at the exit of a one-way street or a road closed to traffic from your direction. You must find another route.

Question 23Traffic signs, signals and road markings

A blue circle with a red border and a single red diagonal slash over a letter P means:

  1. A car park is available ahead
  2. Parking is permitted for a limited time
  3. Parking is reserved for permit holders
  4. No parking is permitted on this stretch Correct answer.

Explanation

A blue circle with a red border and a single diagonal red slash over the letter P prohibits parking. You may generally stop briefly to set down or pick up passengers unless a separate sign forbids that too. A red cross over the P would indicate no stopping at all.

Question 24Traffic signs, signals and road markings

At a junction with no signs or signals, a broken white line and a give-way triangle are absent, and two vehicles arrive at the same time from roads of equal status. What is the usual rule?

  1. Give way to traffic approaching from your left
  2. The larger vehicle always has priority
  3. The vehicle travelling faster has priority
  4. Give way to traffic approaching from your right Correct answer.

Explanation

Where no sign, signal or marking establishes priority, the general rule is to give way to traffic approaching from your right. You should still proceed cautiously and confirm the other driver has seen you. Vehicle size and speed play no part in priority.

Question 25Traffic signs, signals and road markings

You are turning right at a junction and a vehicle approaching from the opposite direction is going straight ahead. Who has priority?

  1. You, because you reached the junction first
  2. Neither, and both should proceed slowly
  3. The oncoming vehicle going straight ahead Correct answer.
  4. You, because you are already indicating

Explanation

A vehicle turning right across oncoming traffic must yield to vehicles going straight ahead or turning left. The indicator signals your intention but does not create a right of way. Wait for a safe gap before completing the turn.

Question 26Traffic signs, signals and road markings

You are driving on a two-lane road and see a circular sign with a red border containing the number 60 in black. What does this sign require of you?

  1. Maintain exactly 60 km/h until the next junction
  2. Reduce speed to 60 km/h only when the road is wet
  3. Expect the next town to be 60 kilometres away
  4. Do not exceed 60 km/h from the point of the sign onward Correct answer.

Explanation

A red-bordered circle with a black number is a regulatory maximum speed sign, and the limit applies from the sign onwards until it is cancelled by another sign or by the end of the restriction. It is an upper limit, not a target speed, so slower driving is permitted when conditions demand it.

Question 27Traffic signs, signals and road markings

A circular sign shows a red border with a black arrow curving to the left and a red diagonal slash across it. What does it prohibit?

  1. Overtaking on the left side
  2. Driving slower than 40 km/h
  3. Turning left at the junction ahead Correct answer.
  4. Entering a one-way street from the left

Explanation

A red-bordered circle with a diagonal slash is a prohibition sign, and the arrow inside shows which movement is banned, so here a left turn is forbidden. You must continue in a permitted direction and find a legal route to your destination.

Question 28Traffic signs, signals and road markings

You approach a junction and see a sign shaped as an inverted triangle with a red border and white centre. What must you do?

  1. Stop completely before the line in every case
  2. Give way to traffic on the road you are joining Correct answer.
  3. Sound your horn before entering the junction
  4. Proceed first because you are on the wider road

Explanation

The inverted red-bordered triangle is the give-way sign, requiring you to let traffic on the crossing or joining road pass before you enter. A full stop is only compulsory where a separate stop sign or stop line requires it.

Question 29Traffic signs, signals and road markings

A circular sign has a blue background with a white bicycle symbol on it. What does this sign tell you?

  1. Cyclists must give way to motor vehicles
  2. Cycles are banned from this road
  3. A bicycle repair facility is ahead
  4. A route or lane is designated for cyclists Correct answer.

Explanation

Blue circular signs are mandatory signs, and a white bicycle on blue marks a route or lane that cyclists are required or permitted to use. Drivers should expect cyclists there and must not obstruct or drive in a cycle lane where prohibited.

Question 30Traffic signs, signals and road markings

What does a solid yellow line painted along the edge of the carriageway indicate?

  1. Parking is permitted at all times
  2. Stopping and parking are prohibited along that edge Correct answer.
  3. The edge of a bus lane begins here
  4. The road shoulder is suitable for overtaking

Explanation

A continuous yellow line at the kerb marks a clearway where stopping and parking are prohibited, keeping the edge free for traffic flow and emergencies. You may not pull over there even briefly to drop off a passenger.

Question 31Traffic signs, signals and road markings

You are in a lane marked with a white arrow that curves to the right, and you intend to continue straight ahead. What should you do?

  1. Stop in the lane and wait for the arrow to change
  2. Continue straight because lane arrows are advisory only
  3. Follow the arrow and turn right, then find a legal route back Correct answer.
  4. Change lanes immediately across the solid line beside you

Explanation

White arrows painted in a lane are mandatory directions for that lane, so a right-turn arrow obliges you to turn right. If you are in the wrong lane, you must follow the arrow and reroute legally rather than forcing a straight movement.

Question 32Traffic signs, signals and road markings

A triangular warning sign shows a black symbol of a traffic signal with red, amber and green lights. What does it warn you about?

  1. A pedestrian crossing without any signals
  2. A junction where you always have priority
  3. Traffic signals ahead where you may have to stop Correct answer.
  4. A signal that is permanently out of order

Explanation

Warning triangles alert drivers to hazards ahead, and the signal symbol means traffic lights control the road in front of you. You should be prepared to stop and to comply with the lights when they become visible.

Question 33Traffic signs, signals and road markings

You see a triangular warning sign showing a black symbol of a road narrowing on both sides. How should you adjust your driving?

  1. Increase speed to clear the narrow section quickly
  2. Ignore it because narrowing signs apply only to lorries
  3. Move to the centre of the road to claim priority
  4. Be ready to slow down and give way if oncoming traffic needs the space Correct answer.

Explanation

A road-narrows warning tells you the carriageway ahead loses width, so two vehicles may not pass comfortably. The safe response is to reduce speed and, if necessary, yield to oncoming traffic rather than racing for the gap.

Question 34Traffic signs, signals and road markings

What is the meaning of a broken yellow line running along the edge of the road?

  1. Stopping is restricted but limited waiting may be permitted Correct answer.
  2. The edge of the road is unsafe for any vehicle
  3. A cycle lane starts at this point
  4. Parking is allowed only for goods vehicles

Explanation

A broken yellow edge line marks a restriction on stopping, often allowing short waiting subject to any accompanying plate or sign. A continuous yellow line is the stricter clearway marking where stopping is not allowed.

Question 35Traffic signs, signals and road markings

You are approaching a junction where the road has a large white triangle painted on the surface of your lane. What does this marking mean?

  1. Give way to traffic on the road you are joining Correct answer.
  2. A pedestrian crossing begins here
  3. You have priority over all other traffic
  4. Overtaking is permitted from this point

Explanation

The painted white triangle on the approach lane reinforces the give-way sign at the junction, telling you to yield to traffic on the road you are entering. It is normally used together with the upright give-way sign and a broken line across the mouth of the junction.

Question 36Traffic signs, signals and road markings

A driver sees a circular sign with a red border showing a black car above a black lorry. What restriction does this sign impose?

  1. Overtaking is prohibited for all motor vehicles Correct answer.
  2. Lorries are prohibited from the road entirely
  3. Cars must not overtake lorries
  4. Lorries must not overtake cars

Explanation

A red-bordered circle containing vehicle symbols stacked vertically is a no-overtaking sign that applies to motor vehicles generally, forbidding them from passing other traffic. The restriction lasts until it is cancelled by another sign or a junction where it ends.

Question 37Traffic signs, signals and road markings

You are driving at night and the road ahead has a line of white studs, with every fourth stud coloured red. What do the red studs mark?

  1. A lay-by suitable for parking
  2. The left-hand edge of the carriageway
  3. The right-hand edge of the carriageway Correct answer.
  4. The centre line of a dual carriageway

Explanation

Reflective road studs carry meaning by colour: white studs mark lane lines, while red studs mark the right-hand edge of the carriageway, warning drivers not to cross into opposing traffic. On a dual carriageway the red studs sit along the central reservation edge.

Question 38Traffic signs, signals and road markings

You are following a slow-moving lorry on a road with a solid white line on your side of the centre and a broken line on the other side. May you overtake?

  1. No, you must stay behind the lorry Correct answer.
  2. No, unless the lorry signals you to pass
  3. Yes, provided you flash your headlights first
  4. Yes, if the road ahead is clear for a long distance

Explanation

Where the centre line nearest you is continuous, you must not cross or straddle it, so overtaking is prohibited for your direction of travel. The broken line on the opposite side allows traffic coming the other way to cross when it is safe.

Question 39Traffic signs, signals and road markings

A rectangular sign with a blue background shows a white symbol of a car and a motorcycle side by side. What does this sign indicate?

  1. A route recommended for cars and motorcycles Correct answer.
  2. A workshop servicing cars and motorcycles
  3. A parking area reserved for cars and motorcycles
  4. Cars and motorcycles are prohibited beyond this point

Explanation

Rectangular blue signs give information, and vehicle symbols on such a sign commonly mark a route recommended for those classes of vehicle. They do not create a prohibition, which would require a red-bordered circle.

Question 40Traffic signs, signals and road markings

You are driving in the left-hand lane of a three-lane road and see a large white arrow painted on the road pointing diagonally left, with a hatched area beyond it. What should you do?

  1. Stop on the hatched area to check your map
  2. Move left as the arrow directs and avoid the hatched area Correct answer.
  3. Drive over the hatched area to reach the right lane
  4. Treat the arrow as a warning of a left bend only

Explanation

A diagonal arrow marking directs traffic away from an obstruction or hatched area, and the hatched zone itself is not to be driven on except in an emergency. You should follow the arrow into the correct lane and keep clear of the stripes.

Question 41Traffic signs, signals and road markings

A driver passes a circular sign with a red border showing a black pedestrian symbol crossed by a red diagonal line. What does the sign mean?

  1. A pedestrian crossing is just ahead
  2. Pedestrians have priority over vehicles
  3. Pedestrians are prohibited from this road Correct answer.
  4. Pedestrians must use the footpath on the other side

Explanation

The red circle with a diagonal slash is a prohibition, and the pedestrian symbol inside means pedestrians may not use that road, typically a motorway or restricted tunnel. Drivers should still watch for people who enter by mistake.

Question 42Traffic signs, signals and road markings

At night you approach roadworks where a line of cones narrows your lane, and a temporary yellow sign shows a black arrow bending to the right. What does the sign require?

  1. Turn right at the next permanent junction
  2. Stop and wait for a worker to guide you
  3. Keep to the right of the cones as the lane diverts Correct answer.
  4. Sound your horn and continue in your lane

Explanation

Temporary yellow signs used at roadworks direct traffic around the works, and a bending arrow tells you to follow the diverted path to the right of the coned area. You should reduce speed and follow the temporary layout rather than the normal lane line.

Question 43Traffic signs, signals and road markings

You see a circular sign with a blue background showing a white arrow pointing down and to the left, and a red border around the sign. What does it require?

  1. Leave the road at the next exit
  2. Give way to traffic from the left
  3. Keep left of the traffic island or obstruction Correct answer.
  4. Turn left at the next junction

Explanation

A blue circle with a white arrow is a mandatory direction sign, and the downward-left arrow tells drivers to pass on the left of an island or obstruction ahead. The red border reinforces that the instruction must be obeyed.

Question 44Traffic signs, signals and road markings

What does a white diagonal stripe pattern painted across the approach to a pedestrian refuge in the centre of the road indicate?

  1. A place where vehicles may wait to turn right
  2. An area that vehicles should not enter Correct answer.
  3. A lane reserved for buses
  4. A parking bay for delivery vehicles

Explanation

Diagonal white stripes, often bordered by solid white lines, mark an area that traffic should keep clear of, protecting a refuge or separating conflicting streams. You may only enter such an area in an emergency or where a broken border and lane line permit it.

Question 45Right-of-way, intersections and roundabouts

You are approaching a roundabout in Oman and see a 'Give Way' line across your lane at the entry. What must you do?

  1. Slow down and be prepared to stop for traffic already on the roundabout Correct answer.
  2. Speed up to merge ahead of circulating vehicles
  3. Sound your horn and proceed without slowing
  4. Stop completely before entering the roundabout in every case

Explanation

A give way line at a roundabout entry means you must yield to traffic already circulating on the roundabout. You only need to stop if there is approaching traffic that would conflict with your entry. Slowing down gives you time to assess the traffic and enter safely.

Question 46Right-of-way, intersections and roundabouts

At a roundabout in Oman, which direction of traffic has priority?

  1. Traffic already circulating on the roundabout Correct answer.
  2. Traffic entering from your left
  3. Traffic entering from your right
  4. The largest vehicle approaching the roundabout

Explanation

Roundabouts in Oman operate with circulating traffic having priority over entering traffic. Drivers at the entry must give way to vehicles already on the roundabout. Size or direction of approach does not create priority.

Question 47Right-of-way, intersections and roundabouts

You are driving on a main road and approach a T-junction where a side road joins from the right. There are no signs or markings. Who should give way?

  1. The vehicle on the side road, because it is joining the main road Correct answer.
  2. You, because the other vehicle is on your right
  3. The vehicle travelling faster
  4. Whichever vehicle arrives first

Explanation

In the absence of signs or markings, a vehicle joining a main road from a side road must give way to traffic already on the main road. The main road has priority regardless of the side road's position. Arrival time or speed does not change this rule.

Question 48Right-of-way, intersections and roundabouts

What does a flashing red traffic signal mean at an intersection in Oman?

  1. Proceed with caution without stopping
  2. The signal is out of order; ignore it
  3. Yield only to traffic from the right
  4. Stop completely, then proceed when safe Correct answer.

Explanation

A flashing red signal is treated like a stop sign: you must come to a complete stop and then proceed only when it is safe. It does not mean the signal is broken. Proceeding without stopping is a violation.

Question 49Right-of-way, intersections and roundabouts

When two vehicles arrive at the same time at an uncontrolled intersection with no signs or markings, and they are travelling in different directions, which vehicle should give way?

  1. The vehicle on the right
  2. The vehicle going straight ahead
  3. The vehicle on the left Correct answer.
  4. The vehicle turning left

Explanation

At an uncontrolled intersection where no signs or markings indicate priority, the general rule is to give way to the vehicle on your right. Therefore, the vehicle on the left must yield to the vehicle on the right. This helps establish a predictable order.

Question 50Right-of-way, intersections and roundabouts

You are entering a roundabout and intend to take the first exit. Which lane should you normally use?

  1. Either lane, as long as you signal
  2. The left lane
  3. The right lane Correct answer.
  4. The lane with the least traffic

Explanation

For the first exit at a roundabout, you should normally approach in the right lane and signal right. This keeps you close to your exit and reduces conflict with circulating traffic. Using the left lane for a first exit can cut across other vehicles.