I85PREP
⌘ K
Alberta Class 7 Test study materials
Alberta Class 7 Test study resources

Alberta Class 7 Test (Canadian Driver Knowledge Tests) practice questions

One question at a time. Build your Alberta Class 7 Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Operation, safety and licensing of cars and light trucks (Driver's Guide content)

Under Alberta law, a Class 7 learner must be accompanied by a supervising driver who holds at least which class of licence?

  1. A Class 7 learner licence held for at least two years
  2. A full Class 5 licence held for at least four years Correct answer.
  3. Any valid driver's licence from any province
  4. A full Class 5 licence held for at least one year

Explanation

A learner driver in Alberta must be supervised by a fully licensed driver who has held a non-learner Class 5 (or higher) licence for at least four years. The supervisor must sit in the front passenger seat and remain capable of taking control of the vehicle.

Question 2Operation, safety and licensing of cars and light trucks (Driver's Guide content)

During the learner stage in Alberta, which of the following restrictions applies to a Class 7 driver?

  1. Driving only between sunrise and sunset
  2. Carrying no more than two passengers at any time
  3. Driving only on roads with a posted limit of 60 km/h or less
  4. Zero alcohol and no driving with any alcohol in the body Correct answer.

Explanation

Alberta's graduated driver licensing program imposes a zero-alcohol condition on learner and probationary drivers. Any alcohol in the body is a violation, regardless of whether the driver appears impaired.

Question 3Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A Class 7 learner in Alberta may drive without a supervising driver in which situation?

  1. When a licensed adult is asleep in the back seat
  2. Never, while holding a learner licence Correct answer.
  3. When driving to and from school only
  4. When driving within a city during daylight

Explanation

A learner must always be accompanied by a qualified supervising driver seated in the front passenger seat. There is no exception for school trips, daylight hours, or sleeping passengers.

Question 4Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the maximum number of demerit points an Alberta driver may accumulate before facing licence suspension?

  1. 10 points
  2. 6 points
  3. 15 points
  4. 8 points Correct answer.

Explanation

In Alberta, accumulating 8 or more demerit points within a two-year period results in a licence suspension. Fully licensed drivers face suspension at that threshold, and learners face it sooner.

Question 5Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A fully licensed Alberta driver is convicted of a traffic offence carrying 3 demerit points. How long do those points remain on the driver's record for suspension purposes?

  1. Five years from the date of conviction
  2. Two years from the date of the offence Correct answer.
  3. One year from the date of the offence
  4. Six months from the date of conviction

Explanation

Demerit points are counted over a two-year period in Alberta. Points from convictions within that window are totalled when determining whether the suspension threshold has been reached.

Question 6Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the legal blood alcohol concentration limit for a fully licensed driver of a private car in Alberta?

  1. 0.02
  2. 0.10
  3. 0.08 Correct answer.
  4. 0.05

Explanation

The Criminal Code limit for impaired driving is a blood alcohol concentration of 0.08. Alberta also imposes provincial sanctions at 0.05 for fully licensed drivers, but 0.08 is the criminal threshold.

Question 7Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver's ability to operate a vehicle is affected after consuming cannabis. Which statement best reflects Alberta's rules?

  1. Cannabis use is permitted before driving if at least one hour has passed
  2. Driving while impaired by cannabis is an offence just as alcohol impairment is Correct answer.
  3. Cannabis impairment is legal as long as the driver stays under 0.08 alcohol
  4. Only alcohol impairment is addressed by impaired driving laws

Explanation

Impaired driving laws apply to impairment by any drug, including cannabis, as well as alcohol. A driver who is impaired by cannabis commits the same offence as one impaired by alcohol.

Question 8Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When a school bus with flashing red lights is stopped on an undivided road, what must a driver approaching from the opposite direction do?

  1. Stop until the red lights stop flashing Correct answer.
  2. Sound the horn and pass carefully
  3. Proceed if no children are visible
  4. Slow to 30 km/h and continue past

Explanation

On an undivided road, traffic in both directions must stop for a school bus displaying flashing red lights. Drivers may proceed only once the red lights stop flashing.

Question 9Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A school bus is stopped with flashing red lights on a divided highway with a median. Which traffic must stop?

  1. Only traffic in the lane next to the bus
  2. All traffic in both directions
  3. No traffic, because the highway is divided
  4. Only traffic travelling behind the bus Correct answer.

Explanation

On a divided highway, only vehicles approaching from behind the stopped school bus must stop. Traffic on the opposite side of a median is not required to stop.

Question 10Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What does a flashing yellow light at an intersection mean?

  1. The signal is broken and the intersection is uncontrolled
  2. Proceed with caution and be prepared to stop Correct answer.
  3. Yield only to vehicles on your right
  4. Come to a complete stop before proceeding

Explanation

A flashing yellow signal warns drivers to proceed cautiously and be ready to stop if necessary. It does not require a full stop unless traffic conditions demand it.

Question 11Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A solid yellow traffic light appears as you approach an intersection. What should you do?

  1. Stop if you can do so safely Correct answer.
  2. Accelerate to clear the intersection before red
  3. Reverse if you have already entered
  4. Always continue at the same speed

Explanation

A steady yellow light means the signal is about to turn red. Drivers should stop if they can do so safely; if stopping is unsafe, they may proceed through the intersection with care.

Question 12Operation, safety and licensing of cars and light trucks (Driver's Guide content)

At an uncontrolled intersection, two vehicles arrive at about the same time. Which vehicle has the right of way?

  1. The vehicle travelling faster
  2. The vehicle on the left
  3. The vehicle that sounds its horn first
  4. The vehicle on the right Correct answer.

Explanation

At an uncontrolled intersection, the driver on the left must yield to the driver on the right when the vehicles arrive at approximately the same time.

Question 13Operation, safety and licensing of cars and light trucks (Driver's Guide content)

You are turning left at a green light. A pedestrian is crossing the road you intend to enter. What must you do?

  1. Drive around the pedestrian if there is room
  2. Proceed, because a green light gives you the right of way
  3. Yield and wait until the pedestrian has cleared your path Correct answer.
  4. Honk to warn the pedestrian to hurry

Explanation

A green light permits movement but does not override a pedestrian's right of way in a crosswalk. A turning driver must yield to pedestrians crossing the road being entered.

Question 14Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the maximum speed limit on a highway outside an urban area in Alberta, unless otherwise posted?

  1. 100 km/h Correct answer.
  2. 110 km/h
  3. 90 km/h
  4. 80 km/h

Explanation

The default maximum speed on Alberta highways outside urban areas is 100 km/h unless a sign indicates otherwise. Posted limits always govern where they appear.

Question 15Operation, safety and licensing of cars and light trucks (Driver's Guide content)

Unless otherwise posted, what is the maximum speed limit in an urban area in Alberta?

  1. 40 km/h
  2. 30 km/h
  3. 60 km/h
  4. 50 km/h Correct answer.

Explanation

The default maximum speed in an urban area is 50 km/h unless a sign posts a different limit. Drivers must also adjust speed for conditions below the posted maximum.

Question 16Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When passing a stopped emergency vehicle with its lights flashing on a road with a posted limit of 80 km/h, what speed must you not exceed while passing?

  1. 50 km/h
  2. 30 km/h
  3. 60 km/h Correct answer.
  4. 80 km/h

Explanation

Alberta requires drivers to slow to a maximum of 60 km/h when passing stopped emergency vehicles with lights flashing on roads with a posted limit of 80 km/h or higher. On lower-speed roads, drivers must slow to 30 km/h.

Question 17Operation, safety and licensing of cars and light trucks (Driver's Guide content)

An emergency vehicle with siren and flashing lights is approaching from behind. What should you do?

  1. Stop immediately in your lane
  2. Move to the left lane and continue
  3. Pull over to the right and stop until it passes Correct answer.
  4. Speed up to stay ahead of it

Explanation

Drivers must yield to emergency vehicles using lights and sirens by pulling as far right as practical and stopping until the vehicle has passed. Blocking the path or stopping in a live lane creates a hazard.

Question 18Operation, safety and licensing of cars and light trucks (Driver's Guide content)

At what distance must you signal before making a turn in an urban area in Alberta?

  1. At least 10 metres
  2. At least 100 metres
  3. At least 50 metres
  4. At least 30 metres Correct answer.

Explanation

In urban areas, drivers must signal at least 30 metres before turning. On highways outside urban areas, the required signalling distance is greater.

Question 19Operation, safety and licensing of cars and light trucks (Driver's Guide content)

You intend to change lanes on a multi-lane road. What is the safest procedure?

  1. Signal and change lanes at the same time
  2. Rely on your mirrors alone before moving
  3. Signal, check mirrors and blind spot, then move when clear Correct answer.
  4. Change lanes first, then signal

Explanation

A safe lane change requires signalling your intention, checking mirrors and the blind spot, and moving only when the lane is clear. Mirrors alone leave blind spots unchecked.

Question 20Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When are you permitted to use a handheld cellphone while driving in Alberta?

  1. Only when using the speakerphone
  2. When driving below 40 km/h
  3. Only when stopped at a red light
  4. Never, while operating a vehicle on a road Correct answer.

Explanation

Alberta's distracted driving law prohibits holding or using a hand-held phone while driving, including while stopped in traffic or at a light. Hands-free use is permitted if it does not require holding the device.

Question 21Operation, safety and licensing of cars and light trucks (Driver's Guide content)

How far before a turn must you signal when driving outside an urban area in Alberta?

  1. At least 50 metres
  2. At least 30 metres
  3. At least 100 metres Correct answer.
  4. At least 150 metres

Explanation

Outside urban areas, drivers must signal at least 100 metres before turning. The longer distance gives highway-speed traffic more time to react.

Question 22Operation, safety and licensing of cars and light trucks (Driver's Guide content)

You are driving and begin to feel drowsy. What is the safest action?

  1. Open a window and turn up the radio
  2. Stop in a safe place and rest before continuing Correct answer.
  3. Drive faster to reach your destination sooner
  4. Drink coffee while continuing to drive

Explanation

Fatigue seriously impairs driving ability, and the only effective remedy is to stop and rest. Fresh air, music, and caffeine do not overcome drowsiness reliably.

Question 23Operation, safety and licensing of cars and light trucks (Driver's Guide content)

Under Alberta's distracted driving law, which activity is prohibited while driving?

  1. Using a hands-free device mounted to the dash
  2. Entering text into a hand-held phone Correct answer.
  3. Listening to the radio
  4. Using voice commands to place a call

Explanation

Entering text on a hand-held device is a clear violation of the distracted driving law. Hands-free use and voice commands are permitted when the device is not held.

Question 24Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver approaches a railway crossing with flashing red lights and the gate lowered. What is the required action?

  1. Stop and wait until the lights stop and the gate rises Correct answer.
  2. Proceed slowly under the gate
  3. Stop, then cross if the train appears far away
  4. Drive around the gate if no train is visible

Explanation

Flashing red lights and a lowered gate mean a train is approaching, and drivers must stop and remain stopped until the signals stop and the gate lifts. Crossing or going around a gate is dangerous and unlawful.

Question 25Operation, safety and licensing of cars and light trucks (Driver's Guide content)

Before backing out of a driveway, what should a driver do?

  1. Rely on the rear-view mirror only
  2. Sound the horn and reverse quickly
  3. Back out first and check for traffic afterward
  4. Check surroundings directly and proceed only when the path is clear Correct answer.

Explanation

When reversing, a driver must check mirrors and look directly around the vehicle to ensure the path is clear, especially for pedestrians and children. Reversing should be done slowly with full visibility.

Question 26Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What must a driver do before moving a vehicle from a parked position at the side of a road?

  1. Rely on other drivers to yield because you are parked
  2. Check mirrors and shoulder, signal, then pull out when it is safe Correct answer.
  3. Flash the headlights and accelerate quickly into the lane
  4. Sound the horn to warn other traffic, then pull out

Explanation

A driver leaving a parked position must first check mirrors and the blind spot, signal the intention to enter traffic, and move only when there is a safe gap. Other road users are not required to yield to a vehicle pulling away from the curb.

Question 27Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When two vehicles reach an intersection with no signs or signals at the same time and their paths cross, which driver must yield?

  1. The driver travelling faster must yield
  2. The driver on the left yields to the driver on the right Correct answer.
  3. The driver on the right yields to the driver on the left
  4. The driver who arrived first must always yield

Explanation

At an uncontrolled intersection where vehicles arrive at about the same time, the driver on the left must yield to the vehicle on the right. This rule applies when the paths of the vehicles cross.

Question 28Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the safest way to share the road with a large truck making a right turn at an intersection?

  1. Drive close behind the truck so other cars cannot cut in
  2. Stay well back and avoid entering the space to the truck's right Correct answer.
  3. Move up beside the truck's cab while it is turning
  4. Pass on the right quickly before the truck begins to turn

Explanation

Large trucks often need to swing wide and may cross into the adjacent lane to complete a right turn. Passing on the right or sitting beside the cab puts a driver in a space the truck will occupy.

Question 29Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When must a driver turn on the vehicle's headlights?

  1. Only on roads without street lighting
  2. Only when other vehicles are visible ahead
  3. Only during rain or snow
  4. From one hour after sunset until one hour before sunrise Correct answer.

Explanation

Alberta requires headlights to be on from one hour after sunset until one hour before sunrise, and at any time when visibility is reduced. Headlights must also be used whenever light conditions make it hard to see people or vehicles clearly.

Question 30Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver is approaching a pedestrian crosswalk where a person is waiting to cross. What is the correct action?

  1. Move to the far side of the lane and keep going
  2. Continue at the same speed if no one has stepped off the curb
  3. Sound the horn so the pedestrian waits
  4. Slow down and stop to let the pedestrian cross Correct answer.

Explanation

Drivers must yield to pedestrians at crosswalks, and a person waiting to cross indicates an intention to do so. Slowing and stopping protects the pedestrian and meets the duty to yield.

Question 31Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the correct way to perform a shoulder check before a lane change?

  1. Close the eyes and rely on the mirrors
  2. Glance over the shoulder toward the blind spot for a brief moment Correct answer.
  3. Check the shoulder only after the vehicle has begun to move
  4. Turn the head fully and look rearward for several seconds

Explanation

A shoulder check is a quick glance into the area the mirrors do not cover, done just before moving. Looking too long takes the eyes off the road ahead and creates a new hazard.

Question 32Operation, safety and licensing of cars and light trucks (Driver's Guide content)

How should a driver adjust the head restraint in a vehicle?

  1. The restraint should be tilted as far back as possible
  2. The restraint should sit at neck level below the ears
  3. The top of the restraint should be level with the top of the head Correct answer.
  4. The restraint should be removed for short trips

Explanation

A head restraint positioned with its top roughly level with the top of the head and close to the back of the head helps prevent whiplash injury. A restraint set too low can act as a pivot point for the neck.

Question 33Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What does a steady red arrow pointing left mean for a driver intending to turn left?

  1. Turn left after yielding to oncoming traffic
  2. Turn left without stopping if the way is clear
  3. Proceed but only if a pedestrian is not present
  4. Stop and wait until the arrow changes before turning Correct answer.

Explanation

A red arrow applies to the movement it indicates, so a left-turning driver must stop and remain stopped until the arrow changes. It is not the same as a green light with a yield condition.

Question 34Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver's vehicle begins to skid on an icy road. What is the recommended response?

  1. Turn the wheel sharply opposite to the skid
  2. Accelerate to regain traction
  3. Ease off the accelerator and steer gently in the direction you want to go Correct answer.
  4. Brake hard and hold the steering wheel firmly straight

Explanation

When traction is lost, easing off the accelerator lets the tires regain grip, and steering where you want the front of the vehicle to go helps bring it back under control. Hard braking or sharp steering can worsen the skid.

Question 35Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the purpose of a vehicle's anti-lock braking system (ABS) during hard braking?

  1. It shortens stopping distance on every surface
  2. It automatically applies the parking brake
  3. It increases engine power during braking
  4. It helps prevent the wheels from locking so steering control is retained Correct answer.

Explanation

ABS rapidly modulates brake pressure to keep the wheels from locking, which allows the driver to keep steering while braking hard. It does not guarantee a shorter stop on all surfaces.

Question 36Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When should a driver use the vehicle's four-way hazard lights?

  1. To warn other drivers when the vehicle is stopped or moving unusually slowly Correct answer.
  2. To indicate an intention to turn left
  3. To thank another driver for yielding
  4. To signal that the vehicle is about to pass

Explanation

Hazard lights warn other road users of a hazard, such as a stopped or disabled vehicle or one moving much slower than traffic. They are not a substitute for turn signals or other communication.

Question 37Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver plans to tow a small utility trailer on a highway. Which requirement applies?

  1. The trailer must be securely hitched and have working lights and safety chains Correct answer.
  2. The trailer may be towed with a rope instead of a hitch for short trips
  3. The trailer needs no lights if the tow vehicle's lights are visible
  4. The trailer may carry passengers if seat belts are fitted

Explanation

A towed trailer must be properly coupled to the towing vehicle and equipped with lights and safety chains so it stays attached and visible. Towing with inadequate equipment creates a serious hazard.

Question 38Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the correct action when a tire blows out while driving at highway speed?

  1. Accelerate to keep the vehicle straight
  2. Hold the steering wheel firmly, ease off the accelerator, and steer to a safe stop Correct answer.
  3. Swerve sharply to reach the shoulder
  4. Brake as hard as possible immediately

Explanation

After a blowout the vehicle may pull to one side, so the driver should grip the wheel firmly, avoid hard braking, and slow gradually before moving off the road. Sudden inputs can cause a loss of control.

Question 39Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What does a white rectangular sign with black symbols on a highway typically indicate?

  1. A regulatory requirement that must be obeyed Correct answer.
  2. A point of interest for tourists
  3. A suggested route for trucks
  4. A warning of a hazard ahead

Explanation

White signs with black symbols or lettering are regulatory signs, such as speed limits and turn restrictions, and must be followed. Warning signs are generally yellow, and information signs are usually green or blue.

Question 40Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the meaning of a yellow diamond-shaped sign showing a curve arrow?

  1. A requirement to turn at the next intersection
  2. A warning that the road curves ahead Correct answer.
  3. A lane reserved for turning traffic
  4. A closed road ahead

Explanation

Yellow diamond-shaped signs are warnings, and a curve arrow warns that the road bends ahead so the driver should reduce speed. They do not impose a turn or close the road.

Question 41Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver is convicted of a criminal offence related to driving. What is a likely consequence under Alberta's licensing rules?

  1. The driver's licence may be suspended or cancelled Correct answer.
  2. The driver may keep driving until the next renewal
  3. The driver receives only a written warning
  4. The driver's insurance rate is unaffected

Explanation

Serious driving offences can lead to suspension or cancellation of a driver's licence in Alberta. Driving privileges depend on meeting legal requirements, and a conviction can remove them.

Question 42Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A fully licensed driver accumulates enough demerit points within the set period to trigger a sanction. What happens first?

  1. The driver's vehicle is immediately impounded
  2. The driver must retake the written test the same day
  3. The driver's registration is cancelled
  4. The driver receives a notice of suspension of driving privileges Correct answer.

Explanation

When demerit points reach the threshold, Alberta issues a suspension of driving privileges. The driver is notified and must serve the suspension before driving again.

Question 43Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What should a driver do when approaching a construction zone where workers are present?

  1. Slow down and obey posted reduced speeds and flag persons Correct answer.
  2. Maintain the normal speed limit because the zone is temporary
  3. Use the shoulder to bypass the work area
  4. Pass the flag person if no oncoming traffic is visible

Explanation

Construction zones often have reduced speed limits and flag persons controlling traffic, and fines are higher when workers are present. Drivers must follow the posted limits and directions.

Question 44Operation, safety and licensing of cars and light trucks (Driver's Guide content)

How should a driver approach a railway crossing that has no signals or gates?

  1. Stop on the tracks to check for approaching trains
  2. Cross immediately after the vehicle ahead clears the tracks
  3. Maintain speed and rely on the train to stop
  4. Slow down, look and listen in both directions, and cross only when clear Correct answer.

Explanation

At an uncontrolled railway crossing the driver must slow down, look and listen for trains, and proceed only when certain no train is coming. Stopping on the tracks is extremely dangerous.

Question 45Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the recommended following distance in good driving conditions?

  1. Exactly one second behind the vehicle ahead
  2. At least two seconds behind the vehicle ahead Correct answer.
  3. One car length for every 10 km/h of speed
  4. Three car lengths regardless of speed

Explanation

A following distance of at least two seconds gives time to react and stop in good conditions. The gap should be increased in poor weather, darkness, or when following large vehicles.

Question 46Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver is stopped at a red light and wants to turn right. When is the turn permitted?

  1. After stopping and yielding to pedestrians and traffic, if no sign prohibits it Correct answer.
  2. Immediately, because right turns are always allowed on red
  3. Only if another driver waves them through
  4. Only after the light turns green

Explanation

A right turn on a red light is allowed after a complete stop, provided there is no sign prohibiting it and the driver yields to pedestrians and cross traffic. The turn is not automatic.

Question 47Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What is the safest way to enter a freeway from an acceleration lane?

  1. Stop at the end of the lane and wait for a large gap
  2. Merge immediately at the start of the lane
  3. Enter slowly and let freeway traffic change lanes
  4. Build speed to match traffic and merge into a suitable gap Correct answer.

Explanation

The acceleration lane allows a driver to reach a speed close to freeway traffic and merge smoothly into a gap. Stopping at the end of the lane disrupts traffic and is dangerous.

Question 48Operation, safety and licensing of cars and light trucks (Driver's Guide content)

When is it legal to pass another vehicle on the right on a multi-lane road?

  1. Only on the shoulder of the road
  2. Whenever the driver is in a hurry
  3. Only when the vehicle ahead signals a left turn on a single-lane road
  4. When the vehicle ahead is in a lane to the left and the right lane is clear Correct answer.

Explanation

On a multi-lane road, a driver may pass on the right when the lane to the right is clear and the vehicle being passed is in a lane to the left. Passing on the shoulder is not permitted.

Question 49Operation, safety and licensing of cars and light trucks (Driver's Guide content)

A driver's view is blocked by a large vehicle when approaching an intersection. What is the best action?

  1. Assume the light is green because the large vehicle is moving
  2. Follow closely so the large vehicle blocks cross traffic
  3. Ease off and wait until the view of the intersection is clear Correct answer.
  4. Accelerate to pass the large vehicle before the intersection

Explanation

When a large vehicle blocks the view, the driver cannot confirm the signal or that the intersection is clear. Easing off and waiting until visibility improves avoids entering on an unsafe assumption.

Question 50Operation, safety and licensing of cars and light trucks (Driver's Guide content)

What should a driver do if the accelerator pedal sticks while driving?

  1. Open the door and prepare to jump out
  2. Shift to neutral, brake firmly, and steer to a safe stop Correct answer.
  3. Pump the accelerator repeatedly
  4. Turn off the engine immediately at highway speed

Explanation

If the accelerator sticks, shifting to neutral disconnects engine power from the wheels, allowing the driver to brake and steer to a safe stop. Turning off the engine at speed can lock the steering and reduce braking assistance.