Physical/Chemical Industrial Waste Treatment Operator study materials
Physical/Chemical Industrial Waste Treatment Operator study resources

Physical/Chemical Industrial Waste Treatment Operator case studies

Physical/Chemical Industrial Waste Treatment Operator · Put your knowledge to work in context.

The Physical/Chemical Industrial Waste Treatment Operator credential is a state-issued operator certification for personnel who run non-biological industrial wastewater treatment systems. It is aimed at operators of package plants and industrial pretreatment facilities where treatment relies on processes such as equalization, pH adjustment, coagulation and flocculation, clarification, dissolved air flotation, filtration, carbon adsorption, ion exchange, and chemical precipitation, rather than on biological treatment. The Physical/Chemical Industrial Waste Treatment Operator case studies are 5 cases and about 2,692 words.

1

Foam Overrun on the Equalization Basin After a Shock Load

At 02:10 the night operator calls you: the 4,000 m³ equalization basin is foaming over the weir into the storm channel, and foam is 0.5 m deep on the walkway. The plant receives hauled leachate and a food-processing discharge.

584 words, about 3 min
2

Chromium Reduction Dosing Drift

Your batch chemical treatment train reduces hexavalent chromium with sodium bisulfite at pH 2.5, then precipitates with lime to pH 8.5. The ORP controller is set to hold 250 mV during reduction.

492 words, about 2 min
3

Sludge Dewatering Shortfall Before a Hauling Deadline

Your belt filter press dewaters alum/ferric sludge to 18% solids, and hauling is billed per wet tonne. A hauler pickup is scheduled in 36 hours for 60 wet tonnes, but the sludge holding tank currently holds 70 m³ at 2.5% solids.

545 words, about 3 min
4

Collection System Hydrogen Sulfide and Confined-Space Entry

A 2.4 m diameter interceptor manhole reads 35 ppm H2S at the rim on a calm, warm afternoon. The wet well downstream is 4.5 m deep and the pump is cycling every 6 minutes.

555 words, about 3 min
5

Laboratory QC Failure on a Permit Parameter

Your monthly discharge monitoring report is due in 3 days. The BOD5 result for the composite is 38 mg/L against a 30 mg/L limit.

516 words, about 3 min