Arkansas Road Signs Practice flashcards
Arkansas Road Signs Practice · Build recall with a focused review session.
32 cards. Read the term and the definition here. The deck at the top of this page is optional.
- Octagon sign meaning
- An octagonal sign is reserved for STOP; a driver must come to a complete stop and yield the right-of-way as required by law.
- Inverted triangle meaning
- An inverted triangular sign means YIELD; slow down, be prepared to stop, and give the right-of-way to traffic on the intersecting road.
- Yellow sign background
- A yellow background on a diamond-shaped sign warns of a road condition or hazard ahead; the black symbol or legend shows the specific warning.
- Orange sign background
- Orange signs mark temporary traffic control in work zones; they warn of changed conditions, workers, equipment, or detours and require extra caution.
- Green guide sign
- Green signs give directional guidance such as destinations, distances, exits, and route information; they do not by themselves impose a regulatory requirement.
- Speed limit sign
- A white rectangular speed limit sign with black numerals sets the maximum lawful speed under normal conditions; slower speeds may be required by weather or traffic.
- STOP sign action
- At a STOP sign, bring the vehicle to a complete halt at the stop line, crosswalk, or edge of the intersection, then proceed only when safe.
- YIELD sign action
- At a YIELD sign, slow down and prepare to stop; enter or cross only when there is a safe gap and you can give right-of-way to conflicting traffic.
- Do Not Enter sign
- A square white sign with a red circle and white horizontal bar prohibits entry; drivers must not proceed past it into that roadway.
- One-way sign
- A black-and-white arrow sign indicates traffic flows only in the arrow's direction; do not drive against the arrow or enter the wrong way.
- Curve warning sign
- A yellow diamond showing a curved arrow warns of a bend ahead; reduce speed before the curve and keep your vehicle in the proper lane.
- Chevron alignment sign
- A chevron sign marks a sharp change in road alignment; follow the direction of the chevron and do not pass in the curve.
- Advisory speed plaque
- A yellow plaque below a warning sign shows a recommended safe speed for the condition ahead; it is advisory rather than the general legal speed limit.
- Merge warning sign
- A yellow diamond with merging arrows warns that traffic from another lane or ramp will join; adjust speed and position to allow a safe merge.
- Slippery when wet
- A yellow warning sign showing a skidding vehicle means the road surface may lose traction when wet; reduce speed and avoid sudden braking or steering.
- Interstate route shield
- The red, white, and blue interstate shield identifies an interstate highway; its number helps drivers follow the route and confirm direction.
- Blue service sign
- A blue sign with white symbols identifies motorist services such as fuel, food, lodging, hospital, or rest areas near an exit.
- Brown recreational sign
- A brown sign with white lettering points to recreation, cultural, or historical attractions; it provides guidance rather than a traffic regulation.
- Exit direction sign
- A green guide sign near an interchange shows the exit number, destination, and often an arrow; drivers should be in the correct lane before the exit.
- Steady red signal
- A steady red traffic signal requires a complete stop before the stop line or crosswalk; proceed only when the signal turns green or a lawful turn is permitted.
- Steady yellow signal
- A steady yellow signal means the light is changing to red; stop if you can do so safely, otherwise proceed cautiously through the intersection.
- Flashing red signal
- A flashing red signal operates like a STOP sign: stop completely, yield to traffic and pedestrians, then proceed when the way is clear.
- Flashing yellow signal
- A flashing yellow signal means proceed with caution; slow down, check for conflicting traffic and pedestrians, and be ready to stop.
- Green arrow signal
- A green arrow permits movement only in the direction shown and usually provides protected right-of-way; still yield to pedestrians and emergency vehicles.
- Yellow center line
- Yellow pavement lines separate traffic moving in opposite directions; a solid yellow line restricts passing, while a broken yellow line permits passing when safe.
- White lane line
- White pavement lines separate lanes of traffic moving in the same direction; broken white lines may be crossed for a safe lane change.
- Stop bar marking
- A wide white stop bar across a lane shows where vehicles must stop for a signal or stop sign; stop before the bar, not beyond it.
- Pavement turn arrow
- A white arrow painted in a lane shows the required or permitted direction of travel from that lane; obey the arrow when approaching an intersection.
- Crossbuck sign
- A white X-shaped crossbuck marks a railroad crossing and gives trains the right-of-way; yield to trains and stop if a train is approaching.
- Railroad flashing red lights
- Flashing red lights at a railroad crossing require drivers to stop and remain stopped until the lights stop flashing and the tracks are clear.
- School zone pentagon sign
- A five-sided fluorescent yellow-green sign marks a school zone or crossing; obey the posted reduced speed and watch for children and crossing guards.
- Flagger STOP paddle
- A flagger holding a STOP paddle directs traffic to stop; follow the flagger's signal even if it differs from other signs or signals in the work zone.