High Risk Work Licence - Boom-Type EWP (WP) flashcards

31 cards. Read the term and the definition here. The deck at the top of this page is optional.

Boom length definition

The total length of the boom structure measured from its pivot point to the platform attachment; it is the fixed design dimension used to decide whether a WP licence is required.

WP licence trigger

A WP licence is required to operate a boom-type elevating work platform whose boom length exceeds 11 metres; machines at or below 11 metres do not require the licence.

Boom vs working height

Boom length is a fixed machine dimension, while working height and reach are derived figures; only boom length determines whether a WP licence is required.

Scissor lift exclusion

A scissor lift is not a boom-type EWP and falls outside WP scope regardless of platform height; vertical mast platforms are also excluded.

Articulated boom EWP

A boom-type EWP with a knuckle joint that allows the platform to be positioned around obstacles; it is within WP scope when boom length exceeds 11 metres.

Telescopic boom EWP

A boom-type EWP with a straight, extending boom; it is within WP scope when the boom length exceeds 11 metres.

Trailer-mounted boom EWP

A boom-type EWP mounted on a trailer for transport; it is within WP scope when its boom length exceeds 11 metres.

WP scope of work

Operating the EWP, setting up and stabilising it, conducting pre-operational checks, and positioning the platform for work at height, inspection or maintenance tasks.

Minimum age for licence

An applicant for a high risk work licence, including WP, must be at least 18 years of age at the time of application.

Approved training provider

Training must be delivered by a registered training organisation or a person otherwise approved by the regulator, and assessment by an approved assessor.

National assessment instrument

The NAI for the WP class sets out the knowledge and performance evidence an applicant must demonstrate before a licence can be issued.

Proof of identity

Applicants must provide the identity documents and photographs required by the regulator, and disclose any suspended or cancelled licences.

Fitness declaration

Applicants must declare any medical condition or impairment that affects their ability to safely operate a boom-type EWP, as required by the regulator.

Licence term

A high risk work licence is issued for a fixed term, commonly five years depending on jurisdiction, and shows the class WP and any conditions.

Application fee

An application for a WP licence must be made on the prescribed form to the relevant regulator and accompanied by the prescribed fee.

Record retention

Training and assessment records are retained by the RTO or assessor, and applicants should keep copies to support renewal or replacement applications.

Direct supervision

A trainee must be directly supervised by a current WP licence holder who is present, able to observe the trainee, and able to intervene to prevent unsafe acts.

Carry the licence

A licensed operator must carry the licence, or an accepted digital licence, at all times while performing high risk work and produce it on request.

Produce on request

An authorised officer or inspector may require production of the licence; the operator must comply within the time allowed or commit an offence.

Digital licence validity

A digital licence is valid only if it can be displayed in a form the regulator accepts; operators should have a fallback means of proving the licence.

Supervisor responsibility

The licensed supervisor remains responsible for the safety of the work, including ensuring the trainee does not operate outside the scope of their training.

Suspended licence

A person must not perform high risk work while their licence is suspended or cancelled, and must not allow another person to use their licence.

Licence conditions

Conditions shown on the licence record, such as restrictions on EWP types or work locations, must be observed by the licence holder at all times.

Licence expiry date

The date on which the licence term ends, shown on the licence and in the regulator's records; work must stop if the licence is not renewed in time.

Renewal requirements

Renewal generally requires a current photo, the renewal fee, and a declaration of any changes to fitness or licence status, lodged before expiry.

Late renewal

Applying after expiry may require a new application, additional training or reassessment, depending on the jurisdiction's rules.

Interstate transfer

Moving to another jurisdiction may require a transfer or new application under mutual recognition arrangements; the licence is issued where the work is performed.

Replacement licence

A replacement is required if the licence is lost, stolen, damaged or destroyed; the regulator issues one on application and payment of the prescribed fee.

Change of details

Changes of name, address or contact details must be notified to the regulator within the specified time, commonly 14 days, and may require a new card.

Change of name evidence

A change of name generally requires documentary evidence such as a marriage or change of name certificate, and may require a new photograph.

Keeping records current

Licence records must be kept up to date so the regulator can contact the holder about renewal and so the licence remains valid and enforceable.