HSC Construction (VET) case studies
HSC Construction (VET) · Put your knowledge to work in context.
The HSC Construction (VET) course is a Stage 6 VET Board Endorsed course (VET BEC) offered to Year 11 and 12 students in NSW. According to the NSW Education Standards Authority (NESA), these courses give students the practical skills and experience to confidently step into work, further training, or even a related university course, and are a great way to prepare for life beyond school. The HSC Construction (VET) case studies are 5 cases and about 2,789 words.
1The Overloaded Switchboard and the Missing RCD
Dan is a second-year carpentry apprentice on a two-storey residential renovation. At 7:40 am his leading hand, Marta, tells him to run the drop saw on the ground floor using a 25 m extension lead plugged into a hallway GPO.
670 words, about 3 min2Reading a Floor Plan When the Dimensions Do Not Add Up
Priya is setting out a timber floor frame for a single-storey extension. The architectural plan is drawn at 1:100 and shows an overall internal width of 5400 mm, with three bays marked 1800 mm, 1800 mm and 1800 mm between bearer centrelines.
559 words, about 3 min3The Circular Saw Blade Change
Tom is a first-year apprentice using a 185 mm circular saw to cut 45 mm structural pine. The blade is blunt and burning the timber.
584 words, about 3 min4Waste, Dust and Runoff on a Tight Site
A crew is demolishing an internal wall in an occupied apartment building. The wall contains plasterboard, timber studs, and some old insulation.
461 words, about 2 min5The Toolbox Talk Nobody Listened To
A supervisor runs a five-minute toolbox talk at 6:55 am on a cold morning. Twelve workers stand in a loose semicircle, several with hoods up, two on their phones, and three who speak English as a second language.
515 words, about 3 min