TASC Art Studio Practice case studies
TASC Art Studio Practice · Put your knowledge to work in context.
The TASC Art Studio Practice course is a Tasmanian senior secondary subject administered by the Office of Tasmanian Assessment, Standards and Certification (TASC). It suits students who want to build practical studio skills alongside critical and reflective thinking about their own work and the work of others. The TASC Art Studio Practice case studies are 5 cases and about 2,271 words.
1Kiln Shelf Loading Under a Deadline
A community studio has one 18-cubic-foot electric kiln due for a cone 6 glaze firing in 36 hours. The studio coordinator has 14 glazed pieces from students: six are wide shallow bowls (30 cm diameter, 6 cm tall), five are tall cylinders (28 cm tall, 9 cm diameter), and three are flat tiles (20 x 20 x 1 cm).
546 words, about 3 min2Mat Cutting for an Overmat That Must Not Cover the Image
A student is framing a 24 x 30 cm watercolor on 300 gsm paper for a juried show. The rules require an overmat that overlaps the paper edge by at least 6 mm on all sides and an overall frame no larger than 40 x 50 cm.
505 words, about 3 min3Glaze Batch Adjustment After a Test Tile Comes Out Wrong
A studio mixes a 10-liter bucket of a satin white glaze from a recipe scaled to 1000 g dry materials. The batch has been dipping too thin: test tiles show a 0.2 mm layer where the studio target is 0.4 mm.
407 words, about 2 min4Critique Session Timing and the Silent Student
A foundation drawing class of 16 students holds a 50-minute group critique of 16 works, one per student. The instructor has allotted 3 minutes per work, leaving 2 minutes of buffer.
384 words, about 2 min5Storage and Handling of a Drying Clay Body
A studio receives 50 kg of a stoneware body in 10 kg blocks wrapped in plastic. The studio is warm (26 C) and dry (30% relative humidity), and the blocks sit on an open shelf near a window.
429 words, about 2 min