VCE VET Furnishing case studies
VCE VET Furnishing · Put your knowledge to work in context.
VCE VET Furnishing is a Vocational Education and Training program delivered within the Victorian senior secondary certificate and administered under the Victorian Curriculum and Assessment Authority (VCAA). It suits students who want to combine hands-on trade skills in furniture making and cabinet work with their VCE studies, and who may be considering an apprenticeship, traineeship or further training after school. The VCE VET Furnishing case studies are 5 cases and about 2,060 words.
1Timber selection under a moisture-content conflict
A workshop is building 12 solid blackwood dining tables for a client whose air-conditioned restaurant holds a stable 45% relative humidity. The delivered boards read 14% moisture content on a calibrated pin meter, and the supplier says the timber was kiln-dried to 10% but has been stored in an open-sided shed for three weeks.
430 words, about 2 min2Machine guard removal to meet a deadline
A joiner is shaping 40 curved chair-back rails on a spindle moulder. The curved jig requires the standard Shaw guard to be swung aside because it fouls the template.
406 words, about 2 min3Adhesive choice for an outdoor bench seat
A landscape contractor orders six spotted gum bench seats for a coastal park. The seats will be fully exposed to sun, salt spray, and driving rain, with no roof or cover.
414 words, about 2 min4Measuring a mitred frame that will not close
A cabinetmaker is assembling a square picture frame from four mitred lengths of 42 x 19 mm hardwood. The frame measures 600 x 600 mm externally.
428 words, about 2 min5Finishing schedule versus curing time
A workshop is finishing eight spotted gum display plinths with a two-pack polyurethane clear coat. The product data sheet specifies a 16-hour minimum recoat interval at 25°C, and a maximum interval of 48 hours before sanding is required.
382 words, about 2 min