BC Motorcycle Test study plan

Define the primary and secondary controls of a motorcycle and state the correct hand or foot input for each

Explain the friction-zone relationship between clutch, throttle and rear brake during a slow-speed launch

List the three phases of a corner (entry, apex, exit) and identify the control inputs used in each

Describe how countersteering initiates a lean and practice the push-left-go-left, push-right-go-right input at walking pace

Demonstrate the start-up and pre-ride inspection sequence in the correct order

Explain clutch-slip and throttle coordination used for a controlled launch and a slow-speed U-turn

State the lane position a rider should hold for a left turn, right turn and straight-through at an intersection

Identify the hand-and-arm signals a rider must be able to give and recognize

Define the three-second following-distance rule and calculate a safe gap at 30, 50 and 80 km/h

Explain how surface hazards (gravel, painted lines, metal grates, wet patches) change traction and braking distance

Recognize the regulatory, warning and construction sign shapes and colors and state what each shape signals

Describe the meaning of solid, broken and double road lines as they apply to passing and lane changes

Apply the see-think-do hazard-perception routine to at least 15 described riding scenarios

Rank the top five collision configurations for motorcycles and state one avoidance tactic for each

Explain right-of-way at uncontrolled intersections, four-way stops and roundabouts

Describe the legal and safe response to a vehicle following too closely behind the motorcycle

State the blood-alcohol and impairment rules that apply to a learner or novice rider

Explain the licensing stages, restrictions and any passenger or night-riding limits for new riders

Interpret pavement markings for crosswalks, stop lines, HOV lanes and bicycle lanes

Describe the correct response to a flashing red light, a flashing yellow light and a dead traffic signal

Explain emergency braking technique and the role of weight transfer and front-brake bias

Describe swerving and the rule against braking and swerving at the same time

Identify the causes of loss of traction in a curve and the recovery inputs

Apply the SIPDE or equivalent search-evaluate-execute loop to a described urban ride

Interpret the full set of regulatory signs a rider will meet on urban and highway routes

Explain passing rules, lane-sharing limits and where a motorcycle may and may not ride

Describe parking rules, turn restrictions and one-way street rules for motorcycles

Read a described road scene and state every sign, marking and signal that governs the rider's next action

Review every missed question from weeks 1 through 7 and restate the correct rule or technique

Re-run two timed mixed practice exams and compare scores against the week-7 baseline

Rehearse the pre-ride inspection and slow-speed control sequence one final time

Confirm test-day logistics: documents, licensing requirements and what to bring