BTEB Welding Exam exam-day guide
BTEB Welding Exam · Prepare for the day ahead.
Your checklist
Admit card / exam registration slip
Bring the official admit card or registration confirmation issued to you for this exam. Check that your name and roll number match your other documents. If you have not received one, confirm with the provider how you will be admitted.
Valid photo ID
Carry the original government-issued photo ID you used during registration (national ID card, passport, or driving licence). Photocopies are usually not accepted. Confirm the exact accepted ID types with the provider.
Personal protective equipment for welding
Bring your own welding helmet with a correct shade lens, leather gloves, safety goggles or glasses, flame-resistant coveralls or apron, and safety boots. Practical tests typically require you to supply or wear PPE; confirm whether the centre lends any equipment.
Basic hand tools
Bring a wire brush, chipping hammer, measuring tape or steel rule, try square, and centre punch. Some centres provide tools, but relying on your own familiar tools reduces surprises. Confirm the permitted tool list with the provider.
Writing materials
Carry black or blue pens, a pencil, and an eraser for any written or drawing component and for signing attendance sheets.
Arrive early at the correct centre
Re-check the centre address, gate, and reporting time on your admit card the day before, and plan travel to arrive well before the reporting time. Late entry is commonly refused. Confirm the reporting time with the provider.
No prohibited items
Leave phones, smart watches, and other electronic devices outside the test area as instructed. Practical welding areas have fire and electrical hazards, so follow all safety directions from the invigilator.
Review the practical task list
Re-read the syllabus or task list for the practical component (for example, joint preparation, welding positions, and inspection of your own work) so you know what operations you may be asked to perform.
Rest and nutrition
Get normal sleep the night before and eat a proper meal. Welding tests are physically demanding and require steady hands and concentration.
Personal medication and water
Bring any prescribed medication you need and a water bottle if the centre permits it. Confirm whether food, water, and breaks are allowed in the test area with the provider.
Know the scoring and pass criteria
Ask or check how the practical work is marked (for example, weld appearance, dimensional accuracy, and defect inspection) and what the pass mark is. Do not assume; confirm the marking scheme with the provider.
Plan the day
Confirm logistics: re-read the admit card for centre address, reporting time, and any instructions. Check with the provider whether tools and PPE are supplied or must be brought. Pack your bag with ID, admit card, PPE, and tools, and check that your helmet lens and gloves are in good condition.
Do light, focused practice only: rehearse setting up your machine, striking and maintaining an arc, and preparing a joint to the required dimensions. Stop heavy practice at least a day before so your hands and eyes are rested.
Review safety fundamentals you will be judged on: correct shade selection, fume and fire precautions, earthing, and safe handling of hot metal. Re-read the syllabus so no practical task surprises you.
Lay out everything you will carry and check it against the checklist. Charge nothing electronic that is banned; instead, note the travel route and backup transport. Sleep at your normal time rather than staying up late.
Eat a proper meal, dress in flame-resistant clothing and safety boots, and leave with extra time for travel. Arrive before the reporting time, keep your documents ready for verification, and listen carefully to the safety briefing and instructions.
Read the task sheet fully before starting. Inspect your materials and equipment, set parameters deliberately, and work at a steady pace. Clean and inspect your own weld as instructed, label your work if required, and stop immediately when time is called.
Hand in your work and any answer sheets as directed, collect your belongings, and leave the area quietly. Note anything the invigilator said about results or next stages, and confirm result publication with the provider.
Rules to check
Bring original photo ID and your admit card; candidates without valid documents may be refused entry. Confirm the exact document requirements with the provider.
Follow all safety instructions in the workshop: wear PPE at all times, do not weld without supervision, and keep the area clear of flammable material.
Do not bring phones, smart watches, or unauthorised electronic devices into the test area; leave them where instructed.
Work only on the task assigned to you and do not accept help from or give help to other candidates; collaboration during the test is treated as misconduct.
Ask the invigilator before leaving the test area for any reason; breaks and movement are usually restricted during timed practical work. Confirm the break policy with the provider.
Stop work immediately when time is called. Continuing after the stop signal may lead to penalties or cancellation of your work.
Scoring is based on the published marking scheme for the practical tasks, including workmanship and safety; confirm the pass mark and weighting with the provider rather than assuming.
Treat invigilators and other candidates with respect and follow their directions; disruptive or unsafe behaviour can lead to removal from the test.