I85PREP
⌘ K
Bhutan Driving Theory Test study materials
Bhutan Driving Theory Test study resources

Bhutan Driving Theory Test practice questions

One question at a time. Build your Bhutan Driving Theory Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Signs, Signals and Markings

What does a red octagonal sign require a driver to do?

  1. Give way to traffic approaching from the right
  2. Reduce speed and proceed with caution
  3. Slow down only if other traffic is present
  4. Come to a complete stop before the line or junction Correct answer.

Explanation

An octagonal red sign is the international shape reserved for STOP. The driver must halt completely, check that the way is clear, and only then move off. Rolling slowly past the line without stopping is an offence even when nothing is coming.

Question 2Road Signs, Signals and Markings

A circular sign with a red border and a black number inside indicates what?

  1. The maximum speed permitted on the road Correct answer.
  2. The distance in metres to the next town
  3. The recommended speed for heavy vehicles
  4. The minimum speed permitted on the road

Explanation

Red-bordered circles are prohibitory signs, and a number inside states the maximum legal speed in kilometres per hour. Exceeding that figure is an offence. Blue circular signs with numbers, by contrast, set a minimum speed.

Question 3Road Signs, Signals and Markings

What is the meaning of a triangular sign with a red border and a symbol inside?

  1. A service facility available nearby
  2. A compulsory instruction that must be obeyed
  3. A warning of a hazard ahead Correct answer.
  4. A parking restriction in force

Explanation

Triangular signs with red borders are warning signs and alert drivers to a hazard ahead such as a bend, junction, or steep descent. They call for reduced speed and heightened attention. Compulsory instructions appear on blue circles instead.

Question 4Road Signs, Signals and Markings

A sign showing a red circle with a red diagonal bar across a symbol means what?

  1. The activity shown is compulsory
  2. The activity shown is permitted only at night
  3. The activity shown is prohibited Correct answer.
  4. The activity shown is recommended

Explanation

A red circle with a diagonal bar is a prohibition sign, so the symbol inside shows something drivers must not do. Examples include no entry for certain vehicles or no overtaking. The bar cancels the activity rather than requiring it.

Question 5Road Signs, Signals and Markings

What do broken white lines along the centre of a road generally indicate?

  1. Lanes may be crossed when it is safe to do so Correct answer.
  2. A bus lane begins at that point
  3. Overtaking is forbidden at all times
  4. The road has a single lane in each direction with no crossing

Explanation

Broken white centre lines separate traffic streams and may be crossed when overtaking or changing lanes is safe and legal. They do not by themselves ban overtaking. A continuous line is the marking that forbids crossing.

Question 6Road Signs, Signals and Markings

What must a driver do when approaching a pedestrian crossing marked by broad white stripes on the road?

  1. Stop only if a pedestrian raises a hand
  2. Accelerate to clear the crossing quickly
  3. Give way to pedestrians on or entering the crossing Correct answer.
  4. Sound the horn to warn pedestrians

Explanation

Zebra-type crossings give pedestrians priority once they are on the crossing or clearly about to step onto it. Drivers must slow down and be ready to stop. Horn use is inappropriate and does not create a right of way.

Question 7Road Signs, Signals and Markings

A traffic light showing a steady amber (yellow) signal means what?

  1. Go only if turning left
  2. Stop unless it is unsafe to do so Correct answer.
  3. The signals are out of order
  4. Proceed quickly before red appears

Explanation

A steady amber light warns that red is about to follow, so drivers should stop unless they are so close that stopping would be dangerous. It is not an invitation to accelerate. Treating amber as an extension of green causes many junction collisions.

Question 8Road Signs, Signals and Markings

What does a blue circular sign containing a white arrow pointing straight ahead mean?

  1. A one-way street ends ahead
  2. Straight ahead is the only permitted direction Correct answer.
  3. Straight ahead is recommended but optional
  4. The road narrows ahead

Explanation

Blue circles carry mandatory instructions, so a white arrow means traffic must proceed in the direction shown. Turning against the arrow is not allowed. Warning signs, by contrast, are triangular.

Question 9Road Signs, Signals and Markings

Approaching a junction controlled by a flashing red light, what should a driver do?

  1. Reverse away from the junction
  2. Wait for a green light before moving
  3. Proceed without stopping because the light is flashing
  4. Stop, then proceed when it is safe Correct answer.

Explanation

A flashing red signal operates like a stop sign, requiring a full stop and a check that the way is clear before proceeding. It does not mean the signals are simply ignored. Drivers should treat the junction with extra care.

Question 10Road Signs, Signals and Markings

A continuous double white line runs down the centre of the road. What does this mean?

  1. Both directions may cross to overtake when clear
  2. Neither direction may cross the lines Correct answer.
  3. Only motorcycles may cross the lines
  4. Only vehicles turning right may cross

Explanation

Double continuous white lines prohibit crossing from either direction, so neither stream may overtake across them. The restriction exists because visibility or road layout makes overtaking unsafe. Drivers must remain in lane until the marking changes.

Question 11Road Signs, Signals and Markings

What does a yellow box junction marked with criss-cross lines require?

  1. Stop inside the box while waiting to turn
  2. Enter only if the exit is clear, except when turning right and blocked only by oncoming traffic Correct answer.
  3. Never enter the box under any circumstances
  4. Use the box only for loading and unloading

Explanation

A yellow box junction must not be entered unless the exit is clear, so that queuing vehicles do not block the junction. The single exception is a right turn where only oncoming traffic prevents completion. Stopping inside the box otherwise is an offence.

Question 12Road Signs, Signals and Markings

A driver sees a triangular sign showing a car skidding. What action is most appropriate?

  1. Increase speed to pass the hazard quickly
  2. Maintain speed because the sign applies only in winter
  3. Reduce speed and avoid sudden braking or steering Correct answer.
  4. Stop immediately on the carriageway

Explanation

The slippery road warning indicates that grip may be reduced, so drivers should slow down smoothly and avoid abrupt braking or steering inputs. The hazard may exist in any season, for example after rain or from spilled oil. Stopping on the carriageway would itself create danger.

Question 13Road Signs, Signals and Markings

A green light is showing but the junction ahead is blocked by queuing traffic. What should the driver do?

  1. Stay behind the stop line until there is room beyond Correct answer.
  2. Sound the horn until traffic moves
  3. Drive around the queue on the wrong side
  4. Enter the junction and wait in the middle

Explanation

A green light permits movement but does not authorise blocking a junction. If the exit is not clear, the driver should wait behind the stop line until space is available. Entering and stopping in the middle obstructs cross traffic and is an offence.

Question 14Road Signs, Signals and Markings

What is indicated by a solid white line along the left edge of the carriageway?

  1. The centre line of a dual carriageway
  2. A pedestrian-only zone
  3. A lane reserved for overtaking
  4. The edge of the carriageway or a shoulder boundary Correct answer.

Explanation

Edge lines mark the boundary of the running carriageway and help drivers keep their position, particularly in poor visibility. They are not centre lines and do not reserve a lane. Crossing them may take a vehicle onto a shoulder or verge.

Question 15Road Signs, Signals and Markings

A driver approaching a roundabout sees a triangular sign with three arrows in a circle. What does it warn of?

  1. A compulsory U-turn ahead
  2. A one-way system ending
  3. A roundabout ahead Correct answer.
  4. A steep hill ahead

Explanation

The circular-arrows triangle warns that a roundabout is ahead, prompting the driver to reduce speed and prepare to give way. It is a warning sign rather than a mandatory direction sign. Drivers should check which exit they need before entering.

Question 16Road Signs, Signals and Markings

What does a sign showing a red circle with a motorcycle inside, without a diagonal bar, mean?

  1. Motorcycles must use a side path
  2. Motorcycles only are permitted to use the route Correct answer.
  3. Motorcycles are prohibited
  4. Motorcycles may park here

Explanation

A blue circle would indicate a mandatory route, but a red-bordered circle without a bar still restricts the class shown to that class alone in many sign systems; here the intended reading is that the route is for motorcycles only. The absence of a diagonal bar is the key: a bar would convert it into a prohibition. Drivers should confirm the sign's exact form before proceeding.

Question 17Road Signs, Signals and Markings

A driver passes a sign showing a red circle with '50' inside and, shortly after, a rectangular sign reading '50' with a diagonal grey bar. What does the second sign mean?

  1. A 50 km/h advisory speed applies
  2. The minimum speed is 50 km/h
  3. The 50 km/h limit has ended Correct answer.
  4. The 50 km/h limit now begins

Explanation

A rectangular sign with a grey diagonal bar cancels the restriction it depicts, so the previous 50 km/h limit no longer applies. The national default limit then governs the road. Drivers should not assume the higher limit is safe in the prevailing conditions.

Question 18Road Signs, Signals and Markings

At a junction, a traffic light shows a green arrow pointing left while the main light is red. What does this permit?

  1. Proceed in any direction
  2. Proceed straight ahead only
  3. Proceed only in the direction of the arrow, after giving way as required Correct answer.
  4. Wait until the main light turns green

Explanation

A green arrow authorises movement only in the direction indicated, even when the main aspect is red. The driver must still yield to pedestrians and any traffic with priority. Other directions remain prohibited until their signal permits them.

Question 19Road Signs, Signals and Markings

What does a broken yellow line along the kerb generally indicate?

  1. Waiting and parking restrictions that apply at certain times Correct answer.
  2. A lane reserved for cyclists
  3. A permanent ban on stopping at all times
  4. The boundary of a school zone

Explanation

Yellow kerb markings regulate waiting and parking, and a broken line usually means the restriction applies during specified periods shown on nearby plates. A continuous yellow line generally indicates a longer or permanent restriction. Drivers should read the accompanying sign for exact times.

Question 20Road Signs, Signals and Markings

A driver intends to turn right at a junction and sees a hatched area bounded by broken white lines in the centre of the road. How should it be used?

  1. Enter it only if necessary and it is safe, never for overtaking Correct answer.
  2. Use it as a waiting area for right turns
  3. Always drive through it to shorten the turn
  4. Never enter it under any circumstances

Explanation

Hatched areas bounded by broken lines may be entered when necessary and safe, for example to position for a turn, but must not be used for overtaking or as a driving lane. Areas bounded by solid lines must not be entered at all. The distinction lies in the type of boundary line.

Question 21Road Signs, Signals and Markings

A driver sees a sign depicting a pedestrian on a triangular red-bordered background. What hazard does it warn of?

  1. A school bus stop
  2. A pedestrian crossing or pedestrians likely in the road ahead Correct answer.
  3. A footpath closed to the public
  4. A compulsory route for pedestrians only

Explanation

The pedestrian warning triangle alerts drivers that people may be crossing or walking in the carriageway ahead, often near a crossing or built-up area. Drivers should reduce speed and scan both sides of the road. It does not impose a mandatory route.

Question 22Road Signs, Signals and Markings

Two lanes merge into one ahead, and the road marking shows a broken white line with arrows indicating the merge. What is the safest response?

  1. Adjust speed and position to merge smoothly, giving way as needed Correct answer.
  2. Cross onto the opposing carriageway to avoid the merge
  3. Stop in the lane until the other vehicle passes
  4. Maintain speed and force the other vehicle to yield

Explanation

Merge markings warn that lanes are converging, so drivers should plan ahead, match speed to the traffic flow, and merge in turn where appropriate. Forcing another driver to yield creates conflict and risk. Stopping in a live lane is dangerous.

Question 23Road Signs, Signals and Markings

A driver approaches a junction where the traffic lights are completely dark due to a power failure. What is the correct procedure?

  1. Treat the junction as uncontrolled and give way according to the general priority rules Correct answer.
  2. Wait indefinitely for the lights to return
  3. Proceed at normal speed because the lights are off
  4. Follow the vehicle in front without checking

Explanation

When signals are dark they impose no instruction, so the junction reverts to the ordinary priority rules and drivers must approach with caution and give way as required. Proceeding at speed is dangerous because other drivers may assume priority. Waiting indefinitely blocks traffic unnecessarily.

Question 24Road Signs, Signals and Markings

A continuous white line separates a bus lane from the general traffic lane during operating hours. What does this mean for a private car?

  1. The car must stay out of the bus lane during the hours shown Correct answer.
  2. The car may park in the bus lane briefly
  3. The car may use the bus lane outside peak hours only if signs permit
  4. The car may enter the bus lane to overtake slow traffic

Explanation

A solid line bounding an operational bus lane means other vehicles must not enter it during the stated hours. The restriction is defined by the signs and times displayed, not by the driver's judgement of traffic conditions. Parking in an operational bus lane is also prohibited.

Question 25Road Signs, Signals and Markings

A driver sees a sign showing a red circle with a car and a motorcycle side by side, crossed by a single diagonal bar. What does it prohibit?

  1. Parking by cars and motorcycles
  2. Overtaking by motor vehicles other than two-wheeled vehicles without sidecars Correct answer.
  3. Entry by motorcycles only
  4. All motor vehicles from entering

Explanation

A red circle with two vehicle symbols and a diagonal bar is the no-overtaking sign, banning motor vehicles from overtaking except two-wheeled machines without sidecars. The bar signals prohibition, and the paired symbols define which vehicles are affected. It does not ban entry to the road.

Question 26Road Signs, Signals and Markings

A driver sees a triangular warning sign containing a red-bordered circle with the number 40 inside it. What does this combination tell the driver?

  1. A warning of a hazard, after which a 40 limit applies Correct answer.
  2. A speed limit of 40 is being enforced ahead
  3. A restriction that ends after 40 metres
  4. A minimum speed of 40 must be maintained

Explanation

A triangular sign with a red border gives warning of a hazard ahead, while a red circle containing a number gives a mandatory maximum speed. Where the two appear together, the triangle warns of the hazard and the circle sets the speed limit that applies from that point. Drivers should slow to the stated figure before reaching the hazard.

Question 27Road Signs, Signals and Markings

What is the meaning of a circular sign with a blue background showing a white bicycle?

  1. Cyclists must give way to motor traffic
  2. Cyclists are prohibited beyond this point
  3. A bicycle repair facility is nearby
  4. A cycle route or lane is provided here Correct answer.

Explanation

Blue circular signs give positive instructions or indicate a facility that is available. A white bicycle on blue therefore marks a route or lane intended for cyclists. Prohibitions are shown by red circles, so a blue sign never forbids the activity it depicts.

Question 28Road Signs, Signals and Markings

A driver approaches a stop line where the word STOP is painted across the lane and a red octagonal sign stands at the kerb. What must the driver do?

  1. Slow down and continue if the road looks clear
  2. Stop only when another vehicle is approaching
  3. Sound the horn before entering the junction
  4. Come to a complete stop and then proceed when safe Correct answer.

Explanation

The octagonal shape is reserved for the stop instruction and is the only sign of that shape. It requires a complete halt at the line, not merely a reduction in speed, after which the driver may move off when the way is clear. The painted word reinforces the same requirement.

Question 29Road Signs, Signals and Markings

What does a single broken white line running down the centre of a two-way road indicate?

  1. Overtaking is permitted when it is safe to do so Correct answer.
  2. The road ahead becomes a one-way street
  3. No vehicle may cross the line at any time
  4. Parking is allowed along the centre of the road

Explanation

A broken white centre line separates opposing streams of traffic without forbidding crossing. A driver may cross it to overtake or turn when visibility and traffic conditions make the manoeuvre safe. Restrictions on crossing are conveyed by continuous lines.

Question 30Road Signs, Signals and Markings

A driver sees a circular sign with a red border showing a white horizontal bar across a blue background. What does it mean?

  1. No entry for all vehicles Correct answer.
  2. End of all restrictions
  3. No through road ahead
  4. Give way to oncoming traffic

Explanation

The no entry sign is a red circle containing a white horizontal bar, and it forbids any vehicle from proceeding past it. It is commonly placed at the exit of one-way streets and at restricted entrances. Drivers must find another route rather than enter.

Question 31Road Signs, Signals and Markings

What is indicated by a sign showing a red circle with a blue background containing a white arrow curving to the left?

  1. A left turn is compulsory ahead
  2. Traffic must pass to the left of the obstruction Correct answer.
  3. A left turn is prohibited at the next junction
  4. A left-hand bend is dangerous in wet weather

Explanation

Blue circular signs with white arrows give mandatory directions. An arrow curving around an obstacle means traffic must keep to that side of it, in this case passing to the left. The obligation is positive, telling drivers where they must go rather than where they may not.

Question 32Road Signs, Signals and Markings

A driver sees a broken yellow line painted along the edge of the carriageway. What does it generally indicate?

  1. Waiting restrictions that apply at stated times Correct answer.
  2. A lane reserved for buses only
  3. A loading bay that operates at all times
  4. A cycle lane separated from traffic

Explanation

Yellow lines along the kerb relate to parking and waiting rather than to moving traffic. A broken yellow line means waiting restrictions apply only during the times shown on nearby plates, unlike a continuous yellow line which applies at all times. Drivers should check the accompanying sign for the hours.

Question 33Road Signs, Signals and Markings

A traffic light displays a red light together with a green arrow pointing straight ahead. What does this combination permit?

  1. Proceeding straight ahead only, after yielding to traffic already in the junction Correct answer.
  2. Proceeding in any direction once the way is clear
  3. Waiting until the main light turns green before moving
  4. Turning right only while the arrow is lit

Explanation

A green arrow authorises movement only in the direction the arrow points, even while the main light remains red. Traffic going straight may proceed, but must still give way to any vehicles or pedestrians already lawfully in the junction. Other directions remain prohibited until their own signal appears.

Question 34Road Signs, Signals and Markings

A driver approaches a junction and sees a triangular sign showing a cross symbol. What does this warn of?

  1. A church or place of worship nearby
  2. A hospital with emergency access
  3. A crossroads ahead where traffic may join from side roads Correct answer.
  4. A railway level crossing without barriers

Explanation

A triangular sign bearing a cross warns of a crossroads where another road crosses or joins the route ahead. Drivers should reduce speed and look for vehicles emerging from the side roads. The warning relates to the layout of the junction, not to buildings in the area.

Question 35Road Signs, Signals and Markings

What does a rectangular blue sign showing a white letter P with a number beneath it mean?

  1. Parking is prohibited for the stated number of minutes
  2. Parking is permitted for a limited period shown on the sign Correct answer.
  3. The parking area closes after the stated hour
  4. Only permit holders may park at any time

Explanation

A blue rectangular sign with a white P indicates that parking is available, and the number below states the maximum permitted duration. Drivers must observe the time limit and any other conditions shown. The sign grants permission rather than imposing a ban.

Question 36Road Signs, Signals and Markings

A driver sees a continuous white line on their own side of the centre and a broken white line on the opposite side. What does this arrangement mean?

  1. The road becomes one-way beyond the marking
  2. Drivers on the driver's side may not cross, while oncoming traffic may Correct answer.
  3. Drivers on both sides may cross the lines freely
  4. Only buses may cross the continuous line

Explanation

Where a continuous and a broken line run together, each side is governed by the line nearest to it. The continuous line on the driver's side forbids crossing, while the broken line permits oncoming traffic to cross when safe. This arrangement is used where overtaking is unsafe in one direction only.

Question 37Road Signs, Signals and Markings

A driver sees a sign showing a red circle with a lorry inside and a diagonal red bar across it. What does this mean?

  1. Lorries may proceed only in the left lane
  2. Lorries must stop at a checkpoint ahead
  3. Goods vehicles above the shown weight are prohibited Correct answer.
  4. A lorry park is available nearby

Explanation

A red circle with a diagonal bar is a prohibition sign, and the vehicle or symbol inside identifies what is banned. A lorry inside such a circle therefore forbids goods vehicles, often above a weight shown on the same sign or a plate. The ban applies from the sign onwards.

Question 38Road Signs, Signals and Markings

A driver sees a triangular sign showing a steep downward slope with a percentage figure. What is the most appropriate action?

  1. Move to the centre of the road to avoid the gradient
  2. Switch off the engine to save fuel on the descent
  3. Accelerate to carry momentum down the slope
  4. Select a lower gear before descending and control speed Correct answer.

Explanation

A steep hill warning alerts drivers to a gradient that can cause vehicles to gain speed quickly. Engaging a lower gear before the descent allows engine braking to hold speed steady and reduces reliance on the footbrake. Brakes used continuously on a long descent can overheat and lose effectiveness.

Question 39Road Signs, Signals and Markings

What is the purpose of a hatched area bounded by a continuous white line in the middle of the road?

  1. It marks a place where vehicles may queue for a turn
  2. It separates traffic streams and must not be entered Correct answer.
  3. It indicates a pedestrian refuge that vehicles may cross
  4. It provides an overtaking lane in both directions

Explanation

Hatched areas bounded by continuous lines separate opposing or diverging streams of traffic and keep vehicles away from a hazardous part of the carriageway. Because the boundary is continuous, drivers must not enter the marked area except in an emergency. Where the boundary is broken, entry is permitted only when necessary and safe.

Question 40Road Signs, Signals and Markings

A driver sees a signal showing a red light and, below it, a green arrow pointing to the right. What should the driver understand?

  1. The signal is faulty and should be ignored
  2. Traffic may proceed straight ahead but not turn
  3. Traffic turning right may proceed when it is safe Correct answer.
  4. All traffic must stop until the main light turns green

Explanation

A green arrow gives permission for movement in the direction indicated even when the main aspect is red. A right-pointing arrow therefore allows a right turn once the driver has given way to oncoming traffic and pedestrians. Other movements remain subject to the red light.

Question 41Road Signs, Signals and Markings

A bus lane is marked by a continuous white line and operates during stated hours. Outside those hours, what does the marking mean for other drivers?

  1. Only motorcycles may use the lane outside operating hours
  2. The lane becomes a parking area for goods vehicles
  3. Other vehicles may use the lane subject to any other markings Correct answer.
  4. The lane remains reserved for buses at all times

Explanation

Bus lane restrictions apply only during the hours displayed on the accompanying sign. Once those hours have passed, the lane reverts to general use unless another restriction is shown. Drivers should still check for any additional signs before moving into it.

Question 42Road Signs, Signals and Markings

A driver sees a triangular sign depicting two children running. Where is such a sign most likely to be placed and why?

  1. Near a school or playground, warning of children in the road Correct answer.
  2. Beside a bus stop, warning of boarding passengers
  3. At a toll plaza, warning of queuing vehicles
  4. At the entrance to a motorway, warning of pedestrians

Explanation

The children symbol is a hazard warning used where children are likely to be crossing or near the carriageway, typically near schools, playgrounds or residential areas. Drivers should reduce speed and be ready to stop suddenly. Children may move unpredictably and may not judge approaching traffic accurately.

Question 43Road Signs, Signals and Markings

A driver approaches a junction where the give way line is a broken double line across the lane. What does this marking require?

  1. Yielding to traffic on the main road before proceeding Correct answer.
  2. Priority over all traffic joining from the left
  3. Proceeding without checking because the line is broken
  4. A complete stop before entering the junction

Explanation

Broken double lines across a lane mark a give way point, requiring the driver to yield to traffic on the road being joined. A stop is needed only if traffic is approaching; otherwise the driver may proceed after checking. The marking differs from a solid stop line, which always requires a halt.

Question 44Road Signs, Signals and Markings

A driver sees a sign showing a red circle with a white arrow pointing down and to the left, crossed by a red diagonal bar. What does it mean?

  1. Traffic must merge to the left lane
  2. A left-hand bend is approaching
  3. Turning left ahead is prohibited Correct answer.
  4. Traffic must keep left of the island

Explanation

The diagonal bar converts the blue mandatory direction sign into a prohibition. Instead of requiring a left turn, the sign forbids turning left at that point. Drivers must choose another route rather than make the prohibited manoeuvre.

Question 45Road Signs, Signals and Markings

A driver sees a signal head where the amber light is flashing rather than steady. What does this indicate?

  1. The junction is closed to all vehicles
  2. The signal is out of order and no rules apply
  3. Drivers may proceed with caution, giving way as required Correct answer.
  4. All traffic must stop and wait for a steady green

Explanation

A flashing amber signal, where used, indicates that drivers may proceed cautiously while giving way to other traffic and pedestrians. It is not a fault condition and does not remove the need to observe priority rules. Drivers should reduce speed and be prepared to stop.

Question 46Road Signs, Signals and Markings

A driver sees a triangular sign showing an exclamation mark. How should this be interpreted?

  1. A general warning of a hazard not covered by a specific symbol Correct answer.
  2. An instruction to sound the horn continuously
  3. A requirement to stop immediately at the sign
  4. A notice that the road is closed ahead

Explanation

The exclamation mark on a warning triangle indicates a hazard for which no specific symbol exists, so the driver must be alert for an unusual danger. The nature of the hazard is often explained by a supplementary plate beneath the triangle. Speed should be reduced until the hazard is identified.

Question 47Road Signs, Signals and Markings

A driver approaches a junction where the traffic light shows green, but a police officer is signalling traffic to stop. What should the driver do?

  1. Proceed slowly while sounding the horn
  2. Continue because the green light gives priority
  3. Stop and follow the officer's directions Correct answer.
  4. Wait for the officer to switch off the signal

Explanation

Directions given by a police officer controlling traffic override the indications of signals, signs and markings. When an officer signals a driver to stop, the driver must stop even if the light is green. Movement resumes only when the officer indicates that traffic may proceed.

Question 48Road Signs, Signals and Markings

A driver sees a broken white line marking the edge of a lane reserved for buses, with the word BUS painted inside the lane. During operating hours, what does the broken line permit?

  1. Other vehicles may cross only to enter or leave a side road or property Correct answer.
  2. Other vehicles may use the lane whenever traffic is heavy
  3. Other vehicles may cross into the bus lane to overtake
  4. Other vehicles may park briefly inside the lane

Explanation

A broken boundary to a bus lane allows other vehicles to cross it when they need to turn into or out of premises or a side road. It does not authorise general use of the lane for overtaking or to bypass congestion. Where the boundary is continuous, crossing is not permitted during operating hours.

Question 49Road Signs, Signals and Markings

A driver sees a sign showing a red circle containing a car and a motorcycle side by side with no diagonal bar. What does it mean?

  1. Only cars and motorcycles may use this road Correct answer.
  2. Cars and motorcycles are prohibited from this road
  3. Cars and motorcycles must keep to the right lane
  4. Cars and motorcycles must not overtake each other

Explanation

A red circle without a diagonal bar is a mandatory sign restricting the road to the vehicles depicted. Showing a car and a motorcycle together therefore means the road is reserved for those classes of vehicle. Other types of traffic must use a different route.

Question 50Road Signs, Signals and Markings

A driver sees a triangular sign warning of a slippery road surface, and the road ahead is wet. Which driving technique best reflects the warning?

  1. Increase speed to cross the slippery section quickly
  2. Reduce speed, avoid sudden braking and steer smoothly Correct answer.
  3. Change to a higher gear and accelerate through bends
  4. Apply the brakes firmly to test the available grip

Explanation

On a slippery surface, tyres have less grip, so abrupt braking, acceleration or steering can cause a skid. Reducing speed and making all inputs smooth keeps the tyres within their available grip. The warning sign should prompt this adjustment before the hazard is reached.