Red Seal Auto Refinishing case studies
Red Seal Auto Refinishing · Put your knowledge to work in context.
The Red Seal endorsement in Automotive Refinishing is a Canadian interprovincial trade credential. It signals that a journeyperson has met a common national standard and can move between provinces without re-writing a certification exam. The Red Seal Auto Refinishing case studies are 5 cases and about 3,404 words.
1Orange Peel on Vertical Panels With a High-Solids Clear
At 14:00 the booth reads 31 °C and 48% RH. A technician is applying a high-solids 2K clear over three vertical door skins and one horizontal deck lid.
737 words, about 4 min2Aluminum Fender, Blistering Body Filler, and a Plastic Bumper
A 2019 aluminum-bodied pickup arrives with three concerns: the hood has 40 rock chips and a 30 mm dent; the right front fender has a previous repair that is blistering in a 25 mm circle above the wheel arch with a rust-colored stain; the plastic front bumper cover has a 120 mm scuff and clearcoat peeling along the top edge. The vehicle has 96,000 km and lives within 2 km of salt water.
660 words, about 3 min3Three-Stage Pearl White Match and Blend
A 2022 SUV in a pearl white three-stage finish (white ground coat, pearl midcoat, clear) needs a right rear door and quarter panel refinish. A spectrophotometer reading taken on the door and the quarter gives ΔE 2.8, and the camera image shows the repair area lighter and slightly yellow compared with the adjacent front door.
671 words, about 3 min4Solvent Pop After an Over-Thick Clearcoat
A technician refinishes a used pickup box side after dent repair. The panel was sanded with P600, cleaned with a solvent wipe, sealed, then basecoat (two coats) and three coats of high-solids clear.
659 words, about 3 min5Blend-Edge Peeling and a Warranty Claim
Six weeks after a rear quarter panel repair and blend into the right rear door, a customer returns with clearcoat peeling along the blend edge and a color that appears darker in sunlight. The original repair order shows 4.2 hours body, 3.0 hours refinish, and 'blend within door' but no spray-out card, no film-build readings, and no record of the paint batch or booth temperature.
677 words, about 3 min