SGI Class 1 study materials
SGI Class 1 study resources

SGI Class 1 study plan

SGI Class 1 · Give each week a clear focus.

8 weeks · About 6 hours per week

Week 1

Class 1 licence and knowledge test requirements (Saskatchewan)

  • Map the Class 1 licence pathway in Saskatchewan from learner stage through full Class 1, listing each stage's eligibility conditions and holding periods from memory on a one-page diagram

  • Define the difference between Class 1 and adjacent classes (Class 2, 3, 4, 5) by matching each to the vehicle combinations it legally permits

  • Build a personal eligibility checklist covering age, existing licence class, medical and vision standards, and driving record thresholds that can disqualify an applicant

  • Explain the knowledge test structure: number of questions, pass mark, question categories, retest waiting rules, and fees, in your own words

Your checkpoint

A single-page Class 1 pathway diagram plus a 20-line eligibility checklist, both written without looking at source material, then corrected against official SGI material

Week 2

Class 1 licence and knowledge test requirements (Saskatchewan) & Road tests and practical assessment

  • Drill the air brake endorsement requirements and the pre-trip inspection sequence until you can recite the inspection order aloud in under five minutes

  • Identify every endorsement or restriction (air brake, heavy trailer, automatic transmission restriction, medical) and state how each is earned or removed

  • List the documents and fees needed on test day and describe what happens if a knowledge test is failed

  • Link each knowledge-test category to the practical skill it protects, so memorized facts connect to real driving tasks

Your checkpoint

A scored practice knowledge test attempt (record score and every missed question with the corrected answer) plus an audio recording of your spoken pre-trip inspection sequence

Week 3

Road tests and practical assessment

  • Break the pre-trip inspection into its component zones and write a scripted walkaround for each zone with the specific defects you must name

  • Describe the coupling and uncoupling procedure for a tractor-trailer step by step, including the tug test and landing gear steps

  • Explain the brake test sequence and the conditions that would cause you to refuse to move the vehicle

  • Identify the scoring logic of the practical road test: what counts as a critical error versus a minor deduction, and how accumulating minor errors can fail a candidate

Your checkpoint

A written walkaround script covering all inspection zones and a numbered coupling/uncoupling checklist, each self-tested twice with errors logged

Week 4

Road tests and practical assessment & Road safety, penalties and carriers/trucking

  • Practice the on-road manoeuvres that appear in the Class 1 road test: lane changes, right and left turns with trailer tracking, highway entry and exit, and a controlled stop

  • Apply space-management and following-distance rules for heavy combinations, converting speed into required following distance at highway and urban speeds

  • Describe how weight, load placement, and trailer length change stopping distance and off-tracking, and state the practical adjustment a driver makes

  • Explain hours-of-service limits for commercial drivers and how fatigue rules affect trip planning

Your checkpoint

Two logged practice drives with a supervising driver, each followed by a written self-assessment listing three specific errors and the correction for each

Week 5

Road safety, penalties and carriers/trucking

  • Summarize the demerit point system: how points accumulate, the thresholds that trigger warnings or suspension, and how points are reduced or expire

  • List the major driving offences most relevant to commercial drivers and the licence consequences of each (suspension length, fine range, impoundment where applicable)

  • Explain impaired driving rules, including the consequences specific to commercial licence holders and the difference between administrative and criminal sanctions

  • Describe cargo securement obligations: who is responsible, what standards apply, and what happens to a driver and carrier when a load is improperly secured

Your checkpoint

A two-column reference sheet pairing each major offence or penalty with its licence consequence, verified against official sources and dated

Week 6

Licensing, registration and online services & Road safety, penalties and carriers/trucking

  • Walk through vehicle registration for a commercial truck: required documents, safety inspection requirements, plate and insurance obligations, and renewal timing

  • Explain carrier obligations in Saskatchewan: operating authority, safety fitness, record-keeping, and what a driver must verify before accepting a trip

  • Compare the online services available for licensing and registration (renewals, address changes, booking appointments, paying fines) and note which tasks still require an in-person visit

  • Describe the consequences of operating an unregistered or improperly registered commercial vehicle

Your checkpoint

A step-by-step registration and carrier-compliance checklist written as if instructing a new driver, with each step tied to the responsible party

Week 7

Class 1 licence and knowledge test requirements (Saskatchewan) & Road tests and practical assessment & Licensing, registration and online services

  • Re-run a full practice knowledge test and score at or above the official pass mark in every category, not just overall

  • Perform a complete mock road test with a supervising driver, including pre-trip, coupling, on-road segment, and uncoupling, scored against the criteria you mapped in week 3

  • Resolve every remaining weak fact by writing a corrected flashcard for each missed item across all domains

  • Confirm your test-day logistics: appointment booking, required identification, vehicle requirements, and fees

Your checkpoint

A mock road test score sheet with a pass/fail judgement and a closed list of all remaining weak items, each with its corrected answer

Week 8

Road tests and practical assessment & Road safety, penalties and carriers/trucking

  • Review only the weak-item list from week 7 and clear every entry by explaining it aloud without notes

  • Rehearse the pre-trip inspection and coupling sequence one final time under time pressure to confirm retention

  • Re-state the top penalty and hours-of-service rules that most often catch new commercial drivers

  • Plan the post-licence first 90 days: supervised practice hours, insurance and registration follow-ups, and how to keep the licence clean

Your checkpoint

A one-page final review sheet in your own words covering all four domains, plus a written 90-day post-licence action plan

Milestones

Week 2: Can state the full Class 1 pathway, eligibility conditions, and endorsement requirements from memory with no more than two corrections

Week 4: Completes a spoken pre-trip inspection and coupling sequence end to end without prompting, and has logged at least two supervised practice drives

Week 6: Scores at or above the pass mark on a full practice knowledge test in every category, and has a finished penalty reference sheet and registration checklist

Week 7: Passes a self-scored mock road test and has a closed list of remaining weak items with corrected answers

Week 8: Can explain every previously missed item aloud without notes and has a written 90-day post-licence plan