Cisco 300-730 SVPN study materials
Cisco 300-730 SVPN study resources

Cisco 300-730 SVPN case studies

Cisco 300-730 SVPN · Put your knowledge to work in context.

The 300-730 SVPN exam - formally titled Implementing Secure Solutions with Virtual Private Networks - is a Cisco specialist exam focused on designing, deploying, and operating VPN solutions across site-to-site and remote-access scenarios. This page is an independent study guide for candidates preparing for that exam. The Cisco 300-730 SVPN case studies are 5 cases and about 3,171 words.

1

DMVPN Phase 3: Spoke-to-Spoke Shortcut After Hub Failover

Your customer runs a DMVPN Phase 3 network on Cisco IOS-XE 17.9 with two hubs (hub-a 10.0.0.1, hub-b 10.0.0.2) and 60 spokes. Each spoke has two NHS entries with priorities 10 and 20, NHRP network-id 100, and holdtime 600.

632 words, about 3 min
2

AnyConnect IKEv2 Certificate Chain Failure After CA Migration

An enterprise ASA 9.16 cluster terminates AnyConnect IKEv2 remote access for 500 users. Authentication uses certificates only: the ASA has an identity certificate from an internal Microsoft CA with CN=asa.example.com and SAN=dns:asa.example.com, and clients receive the root CA through the AnyConnect profile.

560 words, about 3 min
3

FlexVPN Spoke Behind NAT and Missing Spoke-to-Spoke Path

A FlexVPN hub on IOS-XE 17.6 uses IKEv2 with pre-shared keys, a dynamic virtual-template, and EIGRP AS 10. Thirty spokes connect to hub 203.0.113.10; each spoke uses a crypto ikev2 profile with match identity remote fqdn , a keyring, and virtual-template 1 .

803 words, about 4 min
4

GET VPN Rekey Failure After Key Server Switchover in a Non-Multicast Region

A GET VPN deployment has a primary key server (KS) and a secondary KS, plus 200 group members (GMs) across three regions. The GDOI group uses multicast address 239.1.1.1, TEK lifetime 3600 seconds, KEK lifetime 86400 seconds, and pre-shared rekey authentication.

537 words, about 3 min
5

IPsec VTI with BGP Flapping at Rekey Time

Two ASR 1001-X routers build an IPsec VTI tunnel with IKEv2 between AS 65001 and AS 65002. The design uses BGP over the tunnel with hold time 90 and keepalive 30.

639 words, about 3 min