San Lei Ren Yuan (三类人员) flashcards
San Lei Ren Yuan (三类人员) · Build recall with a focused review session.
28 cards. Read the term and the definition here. The deck at the top of this page is optional.
- Principal responsibility
- Overall responsibility attached to the actual leading role, which is not automatically transferred to a contractor, consultant or safety officer.
- Role allocation
- Identification of actual authority, duties, resources and accountability at each post rather than reliance on an unsigned or generic organization chart.
- Contractor interface
- A point where different employers or work groups can create shared hazards requiring actual coordination and clear responsibility.
- Current legal basis
- The applicable present instrument and conditions, distinguished from a remembered obsolete staffing table or an unsupported article citation.
- Risk scenario
- A defined sequence of hazard, exposure, barrier behavior and possible consequence used to give meaning to a risk assessment.
- Independent barrier
- A protective measure whose relevant function does not share the assumed failure dependency with another barrier in the analyzed scenario.
- Corrective verification
- Evidence that an implemented measure addresses the actual hazard mechanism and has not merely changed a tracking record.
- Leading indicator
- A defined measure of preventive activity or capability that requires interpretation and cannot by itself guarantee a future incident outcome.
- Exposure route
- The relevant pathway by which an agent reaches a worker, interpreted with its physical form, duration and actual task conditions.
- Averaging basis
- The time and sampling definition behind a measurement or criterion, which must match before comparing exposure numbers.
- Engineering exposure control
- A physical measure that changes a source or pathway, assessed for effectiveness at the actual workplace rather than its name.
- Health surveillance
- Appropriate monitoring and follow-up related to occupational health that complements prevention without authorizing otherwise uncontrolled harmful exposure.
- Stored energy
- Energy remaining in pressure, gravity, springs, heat or another source even when a visible drive motor has stopped.
- Guard interlock
- A relationship between a guard state and relevant hazardous functions, whose actual stopping behavior and restart conditions require assessment.
- Indirect contact
- Contact involving an exposed conductive part energized by a fault, distinct from touching a conductor normally carrying electrical energy.
- Management of change
- Assessment and control of hazards affected by a proposed process, material, equipment or organizational change before relying on the modified system.
- Temporary works
- Engineered arrangements supporting construction or access during particular phases, with actual load, sequence, foundation and restraint conditions.
- Specialist scheme
- The applicable documented technical and safety arrangement for defined work, requiring actual review and implementation rather than a generic signature.
- Changing site interface
- A relationship among work groups, services, loads or access that can change as construction phases and surrounding conditions evolve.
- Acceptance evidence
- Appropriate records and examination demonstrating the relevant agreed conditions before a particular construction stage or system is relied upon.
- Response capability
- The actual combination of people, competence, communication, equipment and coordination needed for an assessed emergency scenario.
- Secondary casualty
- An additional injured person resulting from an unsafe response or continuing exposure after the initial incident, including unprotected rescue attempts.
- Causal evidence
- Observed or recorded information supporting a proposed incident mechanism, distinguished from an early opinion or unexplored assumption.
- Effectiveness review
- Follow-up assessment of whether a completed corrective action works against the supported cause under the relevant actual conditions.
- Heat-release rate
- The energy released per unit time in the stated fire model, distinct from total fuel energy or a material temperature.
- Flash point
- A defined test-related temperature associated with an ignitable liquid-vapor mixture, not a universal spontaneous-ignition temperature.
- Entrainment
- Addition of surrounding fluid into a moving plume or stream, which can increase total mass flow while reducing temperature.
- Design fire
- A specified scenario or mathematical representation used for an identified analysis objective, not a prediction guaranteed for every real fire.