Gaokao Physics study materials
Gaokao Physics study resources

Gaokao Physics case studies

Gaokao Physics · Put your knowledge to work in context.

This independent study page provides practice for Gaokao Physics. Its editorial learning areas include Mechanics; Electricity Magnetism; Thermal Physics; Waves Optics; Modern Physics; Experimental Reasoning. The Gaokao Physics case studies are 6 cases and about 2,498 words.

1

Block on a Rough Incline: Does the System Move at All?

A 4.0 kg wooden block on a rough plane inclined at 25° to the horizontal is joined by a light string, passing over a small pulley at the top of the plane, to a 2.5 kg mass hanging freely. The coefficients of friction between block and plane are μs = 0.45 and μk = 0.35.

696 words, about 3 min
2

Resolving the Sodium Doublet: Which Order, and Is the Grating at Fault?

A student uses a plane transmission grating marked '500 lines per mm' and 10 mm wide to try to resolve the sodium doublet at 589.0 nm and 589.6 nm. A collimator produces a parallel beam that falls on the full width of the grating, and the diffracted light is observed through a telescope.

699 words, about 3 min
3

Mass-spring measurements and an energy cross-check

A classroom group studies a horizontal cart attached to a spring on an idealized low-friction track. For this calculation the spring is massless, the track is level, friction is neglected and the restoring law is linear over all displacements used.

265 words, about 1 min
4

Calorimetry with a container that absorbs heat

A student places a hypothetical metal specimen into water in an insulated calorimeter. All numerical thermal properties are supplied for this exercise rather than inferred from a material name.

273 words, about 1 min
5

A loaded cell model and a changed external network

A theoretical direct-current source is modeled as an ideal electromotive force of 12.0 V in series with a fixed internal resistance of 1.0 ohm. Initially its external load is a 3.0 ohm resistor.

273 words, about 1 min
6

Comparing photon energy with a supplied work function

An idealized photoelectric experiment uses a clean hypothetical emitting surface with work function 2.30 eV. The surface name is deliberately unspecified: the work function is a supplied model parameter.

292 words, about 1 min