I85PREP
⌘ K
FE Other Disciplines study materials
FE Other Disciplines study resources

FE Other Disciplines study guide

FE Other Disciplines · Work through your exam, one topic at a time.

The Fundamentals of Engineering (FE) exam is the first step toward becoming a licensed professional engineer (P.E.). It is designed for recent graduates and students close to finishing an undergraduate engineering degree from an EAC/ABET-accredited program. The exam is computer-based and administered year-round at NCEES-approved Pearson test centers. A $225 exam fee is payable directly to NCEES. The FE exam includes 110 questions, and the appointment time is 6 hours: a 2-minute nondisclosure agreement, an 8-minute tutorial, 5 hours and 20 minutes for the exam, and a 25-minute scheduled break. The Other Disciplines exam is one of several FE disciplines. Topics on this exam: Other Disciplines (content domain not enumerated in the source). The FE Other Disciplines study guide has 1 section and about 546 words.

01

Other Disciplines: Engineering Breadth for the FE

The FE Other Disciplines exam is the general breadth exam taken by candidates whose degree does not map cleanly onto one of the discipline-specific FE exams (civil, mechanical, electrical, chemical, industrial, environmental, or fire protection). NCEES does not publish a narrow topic list for it, so the exam instead samples fundamentals shared across engineering programs: mathematics and statistics, chemistry, instrumentation and controls, safety/health/environment, ethics and professional practice, engineering economics, statics and dynamics, materials science, fluid mechanics, thermodynamics and heat transfer, and electricity and magnetism. Confirm the current knowledge-area list against the official NCEES exam specifications before you build a study calendar. Format facts that shape how you prepare: it is computer-based, roughly 110 multiple-choice questions, with about 5 hours 20 minutes of testing time inside a longer appointment that includes a break; the searchable NCEES FE Reference Handbook is built into the exam interface, and only an NCEES-approved calculator may be brought in.

546 words, about 3 min

More study resources for FE Other Disciplines

  • Practice questionsA simply supported steel beam spans 6 m and carries a uniformly distributed load of 10 kN/m over its full length.
  • FlashcardsIdeal gas constant R. R = 8.314 J/(mol·K) = 0.08206 L·atm/(mol·K) = 10.73 psia·ft³/(lbmol·R).
  • Cheat sheetUnit conversion anchors: 1 hp = 550 ft·lbf/s = 0.7457 kW; 1 Btu = 778.17 ft·lbf = 1.055 kJ; 1 psi = 6.895 kPa; 1 gal (US) = 3.785 L = 231 in³; 1 slug = 32.174 lbm; 1 kip = 1000 lbf.
  • Key termsAllowable stress design (ASD). A design method that compares computed working stresses from service loads against a fraction of the material's strength, using a factor of safety greater than one.
  • Study planInventory the full FE Other Disciplines topic list and rate your personal confidence on each topic from 1 to 5 to expose your weakest areas.
  • Common mistakesThe Other Disciplines exam deliberately samples across the full FE breadth - mathematics, probability and statistics, chemistry, materials science, fluid mechanics, thermodynamics, mechanics of materials, electrical circuits, engineering economics, ethics, and safety - because it is meant to certify a general engineering intern.
  • Exam-day guideBring the original, unexpired ID in the name used on your registration.