FL CDL Hazmat case studies
FL CDL Hazmat · Put your knowledge to work in context.
The Florida CDL Hazardous Materials (Hazmat) knowledge test is the written exam a commercial driver must pass to add the H endorsement to a Florida CDL and legally haul regulated hazmat. It is aimed at drivers, owner-operators, and carrier personnel who offer or transport hazardous materials, because Florida's enforcement page notes that shippers and carriers share overlapping duties and the carrier bears final responsibility for what goes on the road. The FL CDL Hazmat case studies are 5 cases and about 3,825 words.
1Mixed Load, One Page of Paper: Fixing the Basic Description Before the Wheels Turn
You are dispatched to a chemical distributor in Jacksonville, Florida, to pick up a mixed load for Orlando. The dock gives you a single page of shipping paper.
767 words, about 4 min2Twenty-Four Drums, Twelve Boxes, One Stretch-Wrapped Pallet
You are at a paint plant in Ohio to load a partial trailer for Kentucky. The shipper presents two lots.
741 words, about 4 min3The Drum Labeled Only CORROSIVE
You are loading at a pool-chemical supplier in South Florida for a run to Fort Myers. The load includes: 6 steel drums (non-bulk), each described as UN2922, Corrosive liquid, toxic, n.o.s.
763 words, about 4 min4"We're Under 1,001 Pounds, So No Placards"
You are assigned a straight truck with a lift gate for a run from a Sarasota distributor to a job site in Naples. The load sheet shows: 1 cylinder of propane, UN1978, Division 2.1, 20 lb gross 15 pails of UN1263, Paint, Class 3, PG II, 60 lb each (900 lb) 4 drums of UN1789, Hydrochloric acid, Class 8, PG II, 120 lb each (480 lb) Everything is non-bulk, and all of it is loaded at the distributor in one place at one time.
764 words, about 4 min5The Drum Mark Says 1.4 and the Liquid Says 1.52
You are loading at a batch plant in Tampa for a run to Atlanta. The shipper offers two lots.
790 words, about 4 min