BP Peintre-Revêtements exam-day guide
BP Peintre-Revêtements · Prepare for the day ahead.
Your checklist
Convocation / convocation letter
Bring the official convocation or exam confirmation you received from the organizing body. It states the exact time, address and any candidate number. Confirm with the provider whether a printed copy is required or a digital version is accepted.
Valid photo ID
Bring an original, valid identity document (national ID card, passport or residence permit). Check with the provider which documents are accepted and whether the name must match the convocation exactly.
Basic PPE for practical work
Bring your own safety glasses, hearing protection if applicable, and work gloves. Confirm with the provider whether PPE is supplied on site or must be brought by the candidate.
Work clothing and safety footwear
Wear or bring appropriate work trousers and safety shoes (EN ISO 20345 or equivalent). Confirm with the provider whether specific clothing is mandatory and whether changing facilities are available.
Hand tools for painting and decorating
Bring the hand tools you normally use: putty knives, scrapers, brushes, roller frames, sanding blocks, measuring tools and a mixing bucket. Confirm with the provider which tools are provided and which you must supply.
Personal respiratory protection
Bring a suitable mask (e.g. FFP2/FFP3 or half-mask with filters) for sanding and solvent-based products. Confirm with the provider whether respiratory protection is supplied and whether fit-testing is required.
Watch or timer
A simple wristwatch or timer helps you manage the practical stations and drying times. Confirm with the provider whether smartwatches or phones are allowed in the work area.
Water and a light snack
Practical exams can run several hours. Bring water and a snack if permitted. Confirm with the provider whether food and drink are allowed in the workshop or only in designated break areas.
Review the practical programme and assessment criteria
Re-read the exam programme: which tasks are assessed, time per station, tolerances and safety criteria. The official programme is the only reliable source; confirm details with the provider.
Plan your route and arrival time
Check travel time and aim to arrive at least 30 minutes before the start. Confirm with the provider what happens if you are late and whether late entry is allowed.
Prepare your tool bag the night before
Lay out tools and PPE, check that brushes are clean and handles are sound, and pack everything in one bag. This reduces stress and prevents forgotten items.
Know the site safety rules
Familiarise yourself with general workshop safety: emergency exits, first-aid point, fire extinguisher locations and waste segregation. Confirm site-specific rules with the provider or invigilator on arrival.
Plan the day
Read the official exam programme and assessment grid once more. List every task and the tools/materials needed for each. Check that your PPE and tools are complete and in good condition; replace worn items now. Confirm the exam address, start time and required documents with the provider. Get two full nights of sleep before the exam.
Pack your tool bag and PPE. Prepare your ID and convocation in one place. Avoid new products or techniques you have not practised. Do a light review of safety rules and surface-preparation steps. Eat normally, avoid alcohol, and go to bed early. Check transport one last time.
Eat a proper breakfast. Arrive at least 30 minutes early. Present your ID and convocation. Listen carefully to the invigilator's briefing on safety, timing and station rotation. Ask clarifying questions before the start if instructions are unclear. Set up your workstation and check that tools and materials are as expected.
Work steadily and respect time per station; leave a few minutes for clean-up and inspection. Follow safety rules at all times: PPE, ventilation, waste segregation. Keep your work area tidy. If a product or tool fails, report it immediately to the invigilator. Do not rush drying or curing steps; follow the technical data sheet. Before handing in, check edges, coverage and cleanliness against the assessment criteria.
Rules to check
Bring original, valid photo ID and your convocation. Candidates without acceptable ID may be refused entry; confirm the exact ID policy with the provider.
Arrive at the stated time. Late arrival may be handled according to the provider's rules; confirm in advance whether late entry is allowed and how it affects your time.
Follow all safety instructions given by the invigilator. Wear the required PPE at all times in the work area. Failure to comply may lead to exclusion from part or all of the exam.
Breaks are only allowed as instructed by the invigilator. Confirm with the provider whether you may leave the work area during the exam and whether the clock stops during breaks.
Use only the tools, materials and equipment permitted by the exam programme. Confirm with the provider which items are supplied and which you must bring; unauthorised aids may be removed.
Do not communicate with other candidates during the practical test unless the task explicitly requires teamwork. Keep your workstation separate and do not interfere with others' work.
Scoring is based on the published assessment criteria: conformity of the finished work, correct technique, respect of drying times, safety and housekeeping. Ask the provider for the weighting of each criterion.
If you believe an instruction is unclear or a safety risk exists, raise it with the invigilator before continuing. Do not guess on safety-critical matters.