Juru Bor (Driller) study materials
Juru Bor (Driller) study resources

Juru Bor (Driller) study guide

Juru Bor (Driller) · Work through your exam, one topic at a time.

The Juru Bor (Driller) credential is a workplace certification for people who operate or supervise drilling equipment - typically on mineral exploration, water-well, geotechnical or construction rigs. "Juru Bor" is the Malay term for driller, so the exam is delivered in Malay and assumes you already work around a rig rather than learning the job from scratch. The Juru Bor (Driller) study guide has 8 sections and about 2,380 words.

01

Occupational Safety, Health and Environmental Regulation

This domain tests how a driller applies Malaysian occupational safety, health and environmental law to daily rig work: duties, risk assessment, controls, and environmental reporting. Expect questions on Act 514, FMA 1967, EQA 1974, HIRARC, and the hierarchy of controls.

284 words, about 1 min
02

Drilling Equipment, Components and Inspection

This domain tests identification, function, and inspection of drilling equipment: prime mover, drawworks, mast, crown block, traveling block, drilling line, rotary table or top drive, swivel/kelly, mud pumps, standpipe, rotary hose, BOP stack, choke manifold, and kill line. Questions often ask what to check before use and what defect removes equipment from service.

301 words, about 2 min
03

Drilling Fluids, Circulation and Wellbore Stability

This domain tests mud properties, circulation, and wellbore stability. Expect questions on density, viscosity, gel strength, filtration, pH, solids, equivalent circulating density (ECD), annular velocity, and the balance between formation pressure and fracture pressure.

305 words, about 2 min
04

Drilling Operations and Parameters

This domain tests drilling parameters and operational decisions: weight on bit (WOB), rotary speed, torque, standpipe pressure (SPP), flow rate, rate of penetration (ROP), bit hydraulics, connections, tripping, casing, and cementing. Questions often present a trend and ask for the safe response.

300 words, about 2 min
05

Well Control and Kick Detection

This domain tests kick detection and well control: primary and secondary barriers, kick indicators, shut-in procedure, pressures, kill mud, MAASP, and BOP use. Expect questions on what to do first and which pressure or depth to use.

286 words, about 1 min
06

Rigging, Lifting and Manual Handling

This domain tests rigging, lifting, and manual handling: sling and shackle selection, rated capacity, inspection, load angle, centre of gravity, lift planning, tag lines, exclusion zones, and safe lifting of loads by hand. Use only certified, inspected lifting gear with a readable safe working load (SWL) or working load limit (WLL).

318 words, about 2 min
07

Emergency Response, Firefighting and First Aid

This domain tests emergency response, firefighting, and first aid: alarms, muster, fire classes, extinguisher selection, H2S response, casualty assessment, bleeding control, burns, and CPR. Questions often ask for the first safe action.

313 words, about 2 min
08

Communication, Teamwork and Records

This domain tests communication, teamwork, and records: shift handover, radio protocol, permit-to-work and JSA briefings, stop-work authority, and accurate drilling records. Expect questions on what must be communicated and recorded, and how to avoid ambiguity.

273 words, about 1 min