SOLAS Carpentry study guide
SOLAS Carpentry · Work through your exam, one topic at a time.
The SOLAS Carpentry apprenticeship is a craft apprenticeship in Ireland, delivered through the national apprenticeship system coordinated by SOLAS and supported by the apprenticeship.ie information service. It is intended for people who want to train as carpenters and joiners through a structured mix of on-the-job work with an employer and off-the-job training in a training centre or educational setting. Because it is a craft apprenticeship, apprentices follow the pattern common to craft trades: alternating phases of workplace experience and off-the-job training, with assessments along the way. The apprenticeship.ie source confirms that craft apprentices have specific off-the-job training payments and allowances, and that SOLAS has launched a digital tool showing estimated duration of craft apprenticeships, so candidates should check the current duration for carpentry there rather than relying on older figures. The source does not publish a syllabus, question count, marking scheme, pass mark, fee, or retake policy for carpentry assessments. Preparation should therefore combine practical workshop and site skills - measuring, marking out, hand and power tool use, timber technology, first and second fixing, and safe working - with the theory covered during off-the-job phases. Topics on this exam: Carpentry. The SOLAS Carpentry study guide has 1 section and about 431 words.
01Carpentry: Fire-Resisting Divisions, Fire Doors and Concealed Spaces (SOLAS II-2)
The Carpentry domain tests joinery work that carries a fire rating under SOLAS Chapter II-2: linings, ceilings, fire doors, draft stops and penetration seals. The examiner is not testing cabinetmaking quality; every item turns on whether a timber or composite assembly preserves the class of the division it is fixed to. A-class divisions are steel or equivalent, insulated with approved non-combustible material, and rated A-60, A-30, A-15 or A-0 by fire test. Insulation limits: average temperature rise on the unexposed face not more than 140 °C, and not more than 180 °C at any single point, including joints.
431 words, about 2 minMore study resources for SOLAS Carpentry
- Practice questionsIn SOLAS construction, which structural member is the primary longitudinal strength member running along the bottom of the hull?
- FlashcardsNominal 2x4 actual size. A nominal 2x4 measures 1-1/2 in by 3-1/2 in after surfacing.
- Cheat sheetactual lumber: a 2x4 is 1-1/2 in x 3-1/2 in; a 2x10 is 1-1/2 in x 9-1/4 in.
- Key termsNominal size. The label used to identify lumber for sale, such as 2x4, which is larger than the actual dressed dimensions after planing and drying.
- Study planInventory the full Carpentry domain topic list and rank subtopics by likely exam weight and personal weakness.
- Common mistakesCandidates memorise a few headline numbers for combustible materials and then apply them everywhere, because the regulation text is dense and cross-referenced and the space categories look similar at a glance.
- Exam-day guideBring the original, unexpired ID in the name used on your booking.