SOLAS Wood Manufacturing & Finishing case studies
SOLAS Wood Manufacturing & Finishing · Put your knowledge to work in context.
The SOLAS Wood Manufacturing & Finishing Apprenticeship is a Generation Apprenticeship programme listed on apprenticeship.ie, Ireland's central route to skills development. It is designed for career seekers and apprentices who want to build a career in wood manufacturing and finishing, and for employers who want to develop skilled staff through structured work-based learning. The programme name indicates a craft apprenticeship in the wood sector, combining on-the-job training with off-the-job training at a local apprenticeship provider. This page is an independent study guide. The SOLAS Wood Manufacturing & Finishing case studies are 5 cases and about 2,704 words.
1Exterior Oak Door Failure on a South Elevation
A joinery shop has produced 40 white oak exterior doors, 2100 mm high by 900 mm wide by 45 mm thick, with mortise-and-tenon stiles and rails. At machining, a hand-held meter shows 12–13% moisture content on the outer faces; the specification is 8–10%.
562 words, about 3 min2Catalyzed-Lacquer Pinholes on Maple Cabinet Doors
An architectural millwork shop is spraying 150 maple-veneered MDF cabinet doors, 19 mm thick with 0.6 mm veneer, using an acid-catalyzed lacquer. The shop is at 16 °C and 48% RH.
464 words, about 2 min3Walnut Table-Top Joint Ridging After Winter Installation
Twelve solid walnut table tops, 900 mm wide by 2400 mm long by 40 mm thick, were made by edge-gluing five rips with a standard PVA adhesive. Moisture content at glue-up was 8.5–9.5%.
557 words, about 3 min4Teak Conference Table Finish Crawling
A shop is finishing a solid teak conference table top, 3200 mm by 1200 mm, built from 60 mm wide strips. Some strips have dark, oily streaks.
553 words, about 3 min5Waterborne Conversion on Alder and MDF Cabinet Line
An alder cabinet line is changing from solventborne precatalyzed lacquer to a waterborne two-pack polyurethane. Drawer fronts are solid alder; cabinet sides are MDF.
568 words, about 3 min