Assam ASSEB HSLC NSQF Electronics and Hardware case studies
Assam ASSEB HSLC NSQF Electronics and Hardware · Put your knowledge to work in context.
The Assam ASSEB HSLC NSQF Electronics and Hardware credential is a vocational subject taken alongside the standard HSLC (Class 10) programme under the Assam State School Education Board. It suits students who want a school-leaving qualification with a practical, trade-oriented skill attached - useful for entry-level work in electronics servicing shops, assembly units, hardware retail and repair counters, or as a stepping stone to NSQF-aligned higher vocational courses and ITI-style training. The Assam ASSEB HSLC NSQF Electronics and Hardware case studies are 5 cases and about 3,105 words.
1Air-Conditioner Point: Cable Drop, Warm Plug and Earth Resistance
An ASSEB trainee is asked to inspect a newly wired 1.5-ton split air-conditioner point in a Guwahati flat. The outdoor unit is about 18 m of cable run from a 16 A MCB.
638 words, about 3 min2Lifted Pad and Solder Bridge on a Single-Sided LED Driver Board
A trainee is repairing a 12 V LED driver board from a shop sign. The 1000 µF/25 V electrolytic capacitor is bulged and must be replaced.
682 words, about 3 min3Ghost Voltage on a Corridor Lighting Circuit
A trainee is troubleshooting a corridor lighting circuit in a school workshop. The circuit is 230 V, 50 Hz, wired in 1.5 mm² PVC conduit.
574 words, about 3 min4Shop Inverter Battery: One Low Cell and Short Backup
A shop owner in Nagaon runs a 12 V, 100 Ah lead-acid battery with a 200 W inverter for emergency lighting. The battery is supposed to give about 4 hours of backup at 80% depth of discharge.
574 words, about 3 min5Water-Tank Controller: Relay Chatter and Arduino Resets
A trainee builds a water-tank controller for a hostel in Barpeta. An Arduino Uno is powered from a 12 V 2 A adapter through the Vin pin.
637 words, about 3 min