Maharashtra HSC Multi-Skill General Engineering (NSQF) study guide
Maharashtra HSC Multi-Skill General Engineering (NSQF) · Work through your exam, one topic at a time.
The Maharashtra HSC Multi-Skill General Engineering (NSQF) is a vocational stream subject offered under the State Board of Secondary and Higher Secondary Education, Maharashtra, as part of the National Skills Qualifications Framework. It pairs general higher-secondary study with applied engineering content, so learners leave Class 12 with both a board-recognised certificate and demonstrable workshop-level competence. The Maharashtra HSC Multi-Skill General Engineering (NSQF) study guide has 10 sections and about 2,902 words.
01Engineering Workshop Practice and Safety
This section covers Engineering Workshop Practice and Safety: how a general-engineering workshop is organised, how common machines and hand tools are used safely, and how hazards are controlled. The exam tests PPE selection, machine guarding, housekeeping, fire safety and safe sequences for lathe, drilling, grinding and welding operations.
345 words, about 2 min02Engineering Drawing and Graphics
This section covers Engineering Drawing and Graphics: projection methods, line conventions, dimensioning, sections, scales and freehand sketching. The exam tests whether you can read a drawing and apply standard conventions rather than produce artistic sketches.
298 words, about 1 min03Basic Electrical and Electronics Engineering
This section covers Basic Electrical and Electronics Engineering: current, voltage, resistance, power, series and parallel circuits, AC and DC, transformers, semiconductors, earthing and protective devices. The exam tests simple circuit calculation and safe practice.
297 words, about 1 min04Engineering Materials and Manufacturing Processes
This section covers Engineering Materials and Manufacturing Processes: ferrous and non-ferrous metals, polymers, composites, properties, casting, forming, welding, machining and heat treatment. The exam tests material selection and process sequencing.
284 words, about 1 min05Mechanical Systems
This section covers Mechanical Systems: simple machines, levers, pulleys, gears, belts, chains, bearings, couplings, cams and linkages. The exam tests velocity ratio, mechanical advantage, efficiency and basic fault recognition.
278 words, about 1 min06Tools and Maintenance
This section covers Tools and Maintenance: selection and care of hand tools, fasteners, bearings, lubrication and maintenance strategies. The exam tests safe tool use, correct fitting and planned maintenance.
287 words, about 1 min07Measurement, Metrology and Quality Basics
This section covers Measurement, Metrology and Quality Basics: units, least count, vernier and micrometer instruments, tolerance and fits, calibration, sampling and quality tools. The exam tests correct reading and interpretation of inspection data.
278 words, about 1 min08Applied Science and Mathematics for Engineering
This section covers Applied Science and Mathematics for Engineering: SI units, force, work, power, energy, ratio, percentage, geometry and trigonometry used in workshop calculations. The exam tests unit-consistent calculation and interpretation.
265 words, about 1 min09Employability Skills
This section covers Employability Skills: workplace conduct, communication, teamwork, problem-solving, digital literacy, resume preparation and interview readiness. The exam tests practical workplace behaviour and career preparation, not general motivational advice.
292 words, about 1 min10Communication and Entrepreneurship
This section covers Communication and Entrepreneurship: technical communication in the workplace and the basics of turning an engineering skill into a small enterprise. The exam tests clear messages, documentation and simple business calculations.
278 words, about 1 min