Punjab PSEB Matric Mechanical Drawing and Painting study plan

Set up and label a drawing board with T-square, set squares, drawing sheet fixed by tape, and identify each instrument's function in writing

Construct and bisect a line, an angle and an arc using compass and set squares, showing construction arcs and centre lines

Project a point in all four quadrants and state its distances from HP and VP in a table

Draw the projections of a straight line in the three standard positions (parallel to one plane, inclined to one plane, inclined to both planes)

Apply the correct line convention (visible, hidden, centre, construction) to every line in the week's sheets

Project a plane surface (triangle, square, pentagon) parallel to HP, perpendicular to VP and inclined to one plane

Solve at least four problems where a plane is inclined to both HP and VP using the change-of-position method

Letter a title block and 10 notes in single-stroke vertical capitals at 10 mm, 7 mm and 5 mm heights with consistent stroke weight

Dimension five drawings using aligned dimensioning with arrowheads, extension lines, gap from object and unit convention

Redraw one earlier incorrect sheet with corrected line work and dimension placement

Draw the three views of a prism, pyramid, cylinder and cone standing on HP, with correct hidden lines

Project solids with the axis inclined to HP and to VP, one sheet per case

Construct true shape of a section for a cut plane perpendicular to VP on a square pyramid and a cylinder

Draw the true shape of a cut face on an inclined plane for at least two solids

Check every sheet for view alignment and projection-line correspondence before filing

Produce a full section (front view cut, hatched section, top view) of a hexagonal prism cut by a plane inclined to HP

Identify and draw the four standard isometric axes and construct an isometric scale to measure off true lengths

Convert three orthographic view sets into isometric drawings of simple blocks

Draw isometric views of a cylinder and a cone showing elliptical faces correctly

Compare isometric and oblique cavalier/cabinet projection of the same block on one sheet

Draw oblique projection of two objects, one with the receding axis at 45 degrees and one at 30 degrees, applying half-scale for cabinet

Develop the lateral surface of a cylinder, cone, square prism and square pyramid by parallel-line and radial-line methods

Develop the surface of a truncated cone and a truncated prism, marking the cut line on the development

Locate the line of intersection of two cylinders of unequal diameter and of a cylinder meeting a square prism

Transfer the intersection curve onto the development of the intersected solid

Mix a 12-step value scale and a 12-hue colour wheel in poster colour, labelling primary, secondary and complementary pairs

Demonstrate tint, shade and tone by painting five graded swatches of one hue

Practise three medium-handling techniques: flat wash, wet-in-wet and dry brush, on one practice sheet each

Sketch freehand cubes, cylinders and a drapery fold in pencil, keeping proportion without instruments

Sketch a simple household object from observation in three tonal values

Compose a three-object still life with a clear light source and identify the highlight, mid-tone, core shadow, reflected light and cast shadow on each object

Block in and finish the still life in poster colour, keeping the light direction consistent across all objects

Paint a nature study (leaf, fruit or flower) with attention to local colour and colour of shadow

Apply warm-cool contrast and atmospheric perspective in a simple outdoor sketch composition

Evaluate two of your own paintings against a 5-point checklist of composition, value, colour harmony, edges and light logic

Complete two full-length timed papers under exam conditions, one drawing paper and one painting paper

Revisit the two weakest sheets from weeks 1 to 7 and redo them to the standard of the best sheet

Revise all standard conventions from memory: line types, dimension rules, section hatching angle and spacing, isometric scale

Prepare a final one-page checklist of common errors and verify each finished sheet against it