RPSC AE Civil study guide
RPSC AE Civil · Work through your exam, one topic at a time.
RPSC AE Civil is the shorthand candidates use for the Assistant Engineer (Civil) recruitment conducted by the Rajasthan Public Service Commission (RPSC), the state body whose portal is rpsc.rajasthan.gov.in. The Commission describes itself as "राजस्थान लोक सेवा आयोग Rajasthan Public Service Commission" and publishes recruitment advertisements, syllabus documents, question papers, answer keys and results through its own site. The post is a state government engineering appointment, so the exam is aimed at civil engineering graduates who want a technical cadre job in Rajasthan rather than a general administrative post. The technical subject paper carries the civil engineering content: structural analysis and design, concrete and steel, geotechnical and foundation engineering, fluid mechanics, hydraulics, irrigation, water supply and sanitation, environmental engineering, transportation and highway engineering, surveying, construction planning and management, and the relevant Indian Standards and Rajasthan practice. Preparation should follow the official syllabus slice on the RPSC site, not a coaching summary, and should be built around the Commission's own previous question papers and answer keys, which are published publicly. Work subject by subject, converting each syllabus heading into formula sheets and design-check procedures, then attempt full-length timed papers on the computer-based interface. Topics on this exam: Civil Engineering (technical subject paper). The RPSC AE Civil study guide has 1 section and about 405 words.
01Civil Engineering (Technical Subject Paper)
The RPSC Assistant Engineer (Civil) technical paper samples the civil engineering degree syllabus, not one branch. Questions come from building materials, RCC and steel design, strength of materials and structural analysis, fluid mechanics, irrigation and hydrology, water supply, transportation, surveying, soil mechanics and estimating. Rajasthan public-works examples may frame a question, but marks come from code fundamentals. Concrete: IS 456:2000 limit-state design uses partial safety factors 1.5 for dead and live load, 1.2 with earthquake, and 0.9 dead load for stability.
405 words, about 2 minMore study resources for RPSC AE Civil
- Practice questionsAs per IS 456:2000, the minimum grade of concrete to be used for reinforced cement concrete work in a severe exposure condition is:.
- FlashcardsTarget mean strength formula. Per IS 10262, f'ck = fck + 1.65·s, where s is the assumed standard deviation for the concrete grade; this sets the mix design strength to ensure the required characteristic strength is met.
- Cheat sheetConcrete mix design (IS 10262): target mean strength f'ck = fck + 1.65·s, where s is the assumed standard deviation (e.g., 4 N/mm² for M20–M25); water-cement ratio is then selected from IS 456 durability limits and adjusted for exposure.
- Key termsBulk modulus. The ratio of applied pressure increase to the resulting fractional decrease in volume of a fluid or solid.
- Study planBuild a one-page formula sheet for building materials and construction technology covering cement types and their IS grades, aggregate grading limits, concrete mix proportioning basics, and standard brick and steel section properties.
- Common mistakesCoaching notes and PDF compilations for AE exams are heavily code-tabulated, which creates a false signal that the paper rewards rote clause recall.
- Exam-day guideDownload from the official RPSC portal and print at least two copies.