UPMSP High School Automobile case studies
UPMSP High School Automobile · Put your knowledge to work in context.
The UPMSP High School Automobile is a vocational subject offered under the Uttar Pradesh Madhyamik Shiksha Parishad (UP Board) at the Class 10 level. It is designed for students who want a practical, trade-oriented subject alongside the general high school curriculum - typically candidates aiming either for further vocational study (such as ITI or polytechnic courses) or for entry-level work in workshops, service centres and dealerships. The UPMSP High School Automobile case studies are 5 cases and about 2,497 words.
1Petrol Spill and a Car on a Trolley Jack
At 10:30 on a Saturday, a two-bay workshop has a four-wheeler petrol tank removed for a fuel-pump replacement. About two litres of petrol have spilled across the concrete floor and are spreading toward a floor drain.
535 words, about 3 min2Low Compression After a Timing-Belt Replacement
A 1.2-litre four-cylinder petrol engine has run 68,000 km. It cranks at normal speed and occasionally fires, then dies.
499 words, about 2 min3Spongy Brake Pedal and One Hot Wheel After Pad Fitting
After a front brake pad replacement on a 2016 hatchback, the technician tops up the brake fluid and road-tests the car. The pedal now travels about 55 mm before it feels firm, compared with 25 mm before the repair.
499 words, about 2 min4Battery Flat Overnight With a 380 mA Parasitic Draw
A 12 V, 65 Ah battery in a 1.5-litre diesel car goes flat after standing overnight. The battery is two years old and passed a conductance test at 78% state of health.
484 words, about 2 min5Overheating at Idle With a Cold Bottom Hose and Cold Heater
A 1.4-litre petrol car with 92,000 km overheats after 20 minutes of idling in traffic. The temperature gauge climbs into the red, the cooling fan does not run, the top radiator hose is hot, the bottom hose is cold, and the heater blows cold air.
480 words, about 2 min