UPMSP High School Plumbing - Code 976 study guide
UPMSP High School Plumbing - Code 976 · Work through your exam, one topic at a time.
Plumbing (trade code 976) is the vocational trade subject offered at the high school stage under the Uttar Pradesh Madhyamik Shiksha Parishad (UP Board) vocational stream. It is taken by Class 9 and 10 students who carry a skill trade alongside their regular subjects, and it suits candidates heading towards an ITI plumbing course, an apprenticeship, or paid work with a contractor, builder or municipal water works rather than a purely academic Class 11. The UPMSP High School Plumbing - Code 976 study guide has 10 sections and about 3,401 words.
01Workshop safety
This domain tests whether you can identify hazards in a plumbing workshop, choose the right control or PPE, and act correctly in an emergency such as a fire, electric shock or gas leak. Housekeeping: water, oil and metal swarf cause slips; clear the bench and gangway before starting.
368 words, about 2 min02Hand tools
The exam checks that you name the correct tool for a plumbing task, adjust and hold it properly, and know its limits. Pipe wrench (Stillson): the jaw teeth face the direction of rotation so they bite; pull the handle towards you rather than push.
356 words, about 2 min03Measuring and marking out
This domain tests accuracy: reading the right instrument, allowing for fittings and threads, and marking a line that survives the vice and the hacksaw. Steel rule / measuring tape: tape for long runs, rule for bench work; read at eye level to avoid parallax.
328 words, about 2 min04Pipe materials and fittings - cutting, bending, threading, jointing
The paper expects you to match a material to service conditions and to describe the correct jointing sequence. GI steel (IS 1239, light/medium/heavy): water and gas lines, screwed BSP taper joints; coat cut threads with zinc-rich paint to restore protection.
326 words, about 2 min05Water supply systems, storage, pumping and plumbing fixtures
This domain covers how water reaches a tap: source to sump, pump to overhead tank, gravity to fixtures, plus correct fixture selection and backflow protection. Direct system: municipal main feeds fixtures directly; pressure is unreliable.
340 words, about 2 min06Sanitary installations, drainage, sewerage and traps
This domain tests whether you can lay out a drainage system that flows, vents and seals properly, and choose the right trap and chamber. Two-pipe system: soil (WC) and waste (sink, basin) run separately; most reliable, more pipe.
334 words, about 2 min07Plumbing drawing, trade symbols and sketching
This domain tests whether you can read and produce a plumbing layout: plans, sections, single-line diagrams and the standard symbols that replace written notes. Plan shows the layout from above, elevation shows heights, section cuts through to reveal pipe sizes and levels, and the single-line diagram shows the schematic of supply and drainage.
331 words, about 2 min08Testing, leak detection, maintenance and repair
This domain tests the sequence of pressure and drainage testing, how leaks are traced, and how repairs are made so they last. Test water lines before concealment.
360 words, about 2 min09Estimation, costing, material take-off and work measurement
This domain tests the quantity surveyor side of plumbing: correct units, a complete take-off, and a rate build-up that includes wastage, overheads and tax. Pipe and gutter: running metre.
305 words, about 2 min10Employability skills, workplace ethics, occupational safety and entrepreneurship
This domain tests the professional side of plumbing: how you communicate, work safely under a permit, keep records, and run a small enterprise legally. A written scope, punctuality, tidy work, and explaining a fault in plain language to the customer.
353 words, about 2 min