I85PREP
⌘ K
IESL Part II Mechanical study materials
IESL Part II Mechanical study resources

IESL Part II Mechanical study guide

IESL Part II Mechanical · Work through your exam, one topic at a time.

The Institution of Engineers, Sri Lanka (IESL) is the apex body of engineering professionals in the country and awards credentials such as the Chartered Engineer - CEng (SL) and AMIE (SL), which enable a member to practise as a licensed engineer in Sri Lanka. IESL was incorporated in 1968 by Parliament Act No.17 and describes itself as the largest engineers' organisation in Sri Lanka with over 25,000 members. Within IESL's structure, the Mechanical Engineering Sectional Committee sits alongside the other disciplinary sectional committees, and the Institution publishes Professional Review (PR) rules and PR details for the CDP and Mentor route, which are the framework a mechanical candidate should read before preparing. This page is an independent study resource for candidates working toward the IESL Professional Review in mechanical engineering; it is not affiliated with, endorsed by, or operated by IESL, and it does not reproduce IESL's own documents. Because IESL does not publish the examination format, duration, pass mark, fees or retake rules on the public pages summarised here, this page does not state them - treat any figure you see elsewhere with caution and confirm it directly with the IESL secretariat. Preparation should centre on the official PR rules, your CDP record and mentor guidance, and on defending real mechanical engineering decisions from your own training and experience. Topics on this exam: Mechanical Engineering. The IESL Part II Mechanical study guide has 1 section and about 432 words.

01

Mechanical Engineering - IESL Part II

The IESL Part II Mechanical paper examines the core mechanical syllabus at professional-entry level: engineering thermodynamics, fluid mechanics, solid mechanics and machine design, manufacturing and materials. Questions are quantitative. Marks go to SI-consistent working, stated assumptions, and design decisions defended with a factor of safety - not only to the final number. Steady-flow energy equation per unit mass: q − w = Δh + Δke + Δpe.

432 words, about 2 min

More study resources for IESL Part II Mechanical

  • Practice questionsIn a steady-flow steam turbine, steam enters at 3 MPa and 400 °C with negligible velocity and leaves at 10 kPa with a quality of 0.92.
  • FlashcardsOtto cycle efficiency. Thermal efficiency of the ideal Otto cycle is η = 1 − 1/r^(γ−1), where r is the compression ratio and γ is the specific heat ratio.
  • Cheat sheetThermal efficiency of an ideal Otto cycle: η = 1 − 1/r^(γ−1), where r is compression ratio and γ = cp/cv; efficiency rises with r and with lower γ.
  • Key termsStress. Internal force per unit area within a material, expressed as force divided by cross-sectional area.
  • Study planInventory the full IESL Part II Mechanical syllabus and tag each topic as strong, shaky, or unknown.
  • Common mistakesCandidates carry over the habit of 'plugging into the formula' and treat the equation as a list of numbers rather than a statement about a defined system; under time pressure the datum and the sign of the elevation term get skipped.
  • Exam-day guideBring the original, unexpired ID in the name you registered with.