I85PREP
⌘ K
Myanmar DA Part I Module I study materials
Myanmar DA Part I Module I study resources

Myanmar DA Part I Module I practice questions

One question at a time. Build your Myanmar DA Part I Module I understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic Signs, Signals and Road Markings

In Myanmar, a circular road sign with a red border and a white background generally conveys which type of message?

  1. A prohibition or restriction that drivers must obey Correct answer.
  2. A mandatory instruction that must be followed
  3. A warning of a hazard ahead
  4. A guide to a nearby facility

Explanation

Circular signs with a red rim and white face are regulatory prohibition signs, such as speed limits and no-entry restrictions. They tell the driver what must not be done. Warning signs are triangular, and mandatory instruction signs are circular with a blue background.

Question 2Traffic Signs, Signals and Road Markings

A triangular sign with a red border and a symbol inside is placed on the approach to a hazard. What should a driver understand from this sign?

  1. The road ends and traffic must turn back
  2. A parking zone reserved for permit holders
  3. A warning of a hazard or road condition ahead Correct answer.
  4. A compulsory minimum speed applies

Explanation

Triangular signs with a red border are warning signs; they alert the driver to a hazard or changed road condition ahead so speed can be reduced. They do not impose a legal prohibition on their own. The driver should anticipate the hazard shown by the symbol.

Question 3Traffic Signs, Signals and Road Markings

At a signalised junction the light turns amber (yellow) as you approach. What is the correct action under Myanmar traffic rules?

  1. Continue at the same speed without checking
  2. Sound the horn and proceed through
  3. Stop before the stop line unless it is unsafe to do so Correct answer.
  4. Accelerate to clear the junction before red

Explanation

Amber means the signal is about to turn red and drivers should stop before the stop line. The only exception is when stopping suddenly would cause a collision, in which case the driver may proceed with care. Accelerating to beat the red is dangerous and not permitted.

Question 4Traffic Signs, Signals and Road Markings

A solid white line runs along the centre of the carriageway. What does this marking mean for overtaking?

  1. Overtaking is prohibited; vehicles must keep to their own side Correct answer.
  2. Overtaking is permitted if the road ahead is clear
  3. The line marks the edge of a bus lane only
  4. The line may be crossed freely when turning

Explanation

A continuous (solid) centre line is a restriction marking: drivers must not cross it to overtake or change lanes. It is used where visibility or road layout makes crossing unsafe. A broken centre line, by contrast, permits overtaking when it is safe.

Question 5Traffic Signs, Signals and Road Markings

What does a red octagonal sign with the word STOP require a driver to do?

  1. Yield to traffic on the right without stopping
  2. Stop only when a pedestrian is crossing
  3. Come to a complete stop, then proceed when safe Correct answer.
  4. Slow down and proceed if no traffic is visible

Explanation

The octagonal STOP sign is the only sign that requires a full stop at the marked line or junction. The driver must halt completely, check that the way is clear, and then proceed. A rolling slow-down does not satisfy the requirement.

Question 6Traffic Signs, Signals and Road Markings

A circular blue sign shows a white arrow pointing to the left. What instruction does this give?

  1. Left lane ends ahead
  2. Turn left is compulsory Correct answer.
  3. A left bend is ahead
  4. Turn left is prohibited

Explanation

Circular blue signs are mandatory instruction signs. A white arrow on a blue circle directs the driver to follow that direction, so a left arrow means a left turn is compulsory. Prohibition of a left turn is shown by a red circle with a crossed arrow.

Question 7Traffic Signs, Signals and Road Markings

You see a flashing red light at a level crossing. What must you do?

  1. Stop and wait until the light stops flashing Correct answer.
  2. Sound the horn and cross quickly
  3. Proceed slowly while checking for trains
  4. Treat it as a give-way and continue if no train is visible

Explanation

A flashing red signal at a level crossing means a train is approaching or the crossing is not safe to use. Drivers must stop and remain stopped until the lights stop flashing and the barriers, if any, are raised. Passing the crossing at this time is extremely dangerous.

Question 8Traffic Signs, Signals and Road Markings

Double yellow lines painted along the edge of the carriageway indicate what?

  1. Parking is allowed for short periods
  2. The road narrows ahead
  3. A cycle lane begins here
  4. Waiting and parking are prohibited along that edge Correct answer.

Explanation

Yellow lines along the kerb are waiting and parking restrictions. Double yellow lines generally mean no waiting or parking at any time, so a vehicle may not be left there. They do not affect the right to drive along the road.

Question 9Traffic Signs, Signals and Road Markings

Approaching a junction controlled by traffic lights, the signal shows a green arrow pointing right while the main light is red. What does this allow?

  1. Turn right, after yielding to other traffic as required Correct answer.
  2. Wait until the main light turns green
  3. Proceed in any direction
  4. Proceed straight ahead only

Explanation

A green arrow authorises movement only in the direction shown by the arrow, even when the main signal is red. Drivers turning right under the arrow must still give way to oncoming traffic and pedestrians where the layout requires it. Other directions remain prohibited until their signal permits them.

Question 10Traffic Signs, Signals and Road Markings

A broken (dashed) white line separates two lanes travelling in the same direction. What does it permit?

  1. Overtaking only by heavy vehicles
  2. No lane changing at any time
  3. Driving on either side regardless of lane use
  4. Lane changing when it is safe to do so Correct answer.

Explanation

A broken white line between lanes in the same direction indicates that lane changing is allowed when it can be done safely. Drivers should signal, check mirrors and blind spots, and ensure the adjacent lane is clear. A solid line in the same position would prohibit crossing.

Question 11Traffic Signs, Signals and Road Markings

A sign shows a red circle with a black number '40' inside. How should a driver interpret this?

  1. A recommended speed of 40 km/h in good conditions
  2. A minimum speed of 40 km/h
  3. A maximum speed limit of 40 km/h Correct answer.
  4. A warning that the road narrows at 40 metres

Explanation

A red-bordered circle containing a number is a regulatory speed limit sign. The number states the maximum legal speed in kilometres per hour on that stretch of road. Exceeding it is an offence regardless of traffic or weather conditions.

Question 12Traffic Signs, Signals and Road Markings

You are driving and approach a pedestrian crossing marked by broad white stripes on the road. A pedestrian is waiting at the edge. What should you do?

  1. Continue, because pedestrians must wait for a gap
  2. Slow down and be prepared to stop to let the pedestrian cross Correct answer.
  3. Sound the horn to warn the pedestrian to stay back
  4. Move to the opposite lane to pass the crossing

Explanation

At a marked pedestrian crossing, drivers must slow down and give way to pedestrians who are crossing or waiting to cross. The white stripes make the crossing visible so drivers can anticipate and stop safely. Failing to yield at a crossing is an offence.

Question 13Traffic Signs, Signals and Road Markings

What is the meaning of a yellow box junction marked with diagonal yellow lines on the road surface?

  1. Vehicles must not enter the box unless the exit is clear Correct answer.
  2. Vehicles may wait inside the box while queuing
  3. The area is reserved for turning vehicles only
  4. Parking is allowed inside the box for loading

Explanation

A yellow box junction is designed to keep the junction clear. Drivers may enter only if their exit is clear, so they do not become stranded inside the box and block cross traffic. Waiting inside the box when the exit is blocked is prohibited.

Question 14Traffic Signs, Signals and Road Markings

A driver sees a sign with a red circle containing a black car and a red diagonal bar. What does it mean?

  1. No entry for motor vehicles Correct answer.
  2. Motor vehicles must proceed with caution
  3. Vehicles must keep to the left
  4. A car park is ahead

Explanation

A red circle with a diagonal red bar over a symbol is a prohibition sign. With a car symbol it means motor vehicles are not allowed beyond that point. The diagonal bar is the standard way of showing that the activity is forbidden.

Question 15Traffic Signs, Signals and Road Markings

On a two-way road, a driver wishes to overtake a slower vehicle. Which combination of markings makes overtaking lawful?

  1. Double solid lines on both sides
  2. A solid line plus a broken line where the solid line is nearest the driver
  3. A broken centre line on the driver's side with a clear view ahead Correct answer.
  4. A solid centre line on the driver's side

Explanation

Overtaking is permitted when the centre line on the driver's side is broken and the road ahead is clear. The line nearest the driver governs whether that driver may cross. A solid line nearest the driver means crossing is prohibited for that direction.

Question 16Traffic Signs, Signals and Road Markings

A driver approaches a junction where the traffic lights are not working and no officer is present. What should the driver do?

  1. Treat the junction as uncontrolled and give way as required Correct answer.
  2. Follow the vehicle in front without checking
  3. Proceed at normal speed because the signals are off
  4. Wait indefinitely until the lights are repaired

Explanation

When signals fail, the junction reverts to the normal give-way rules for an uncontrolled junction. Drivers should slow down, be prepared to stop, and yield to traffic and pedestrians with priority. Assuming a right of way because the lights are off is dangerous.

Question 17Traffic Signs, Signals and Road Markings

A sign shows a red triangle with a symbol of a bend to the right. What action is expected of the driver?

  1. Right turns are prohibited ahead
  2. Keep right of the central reservation
  3. Turn right at the next junction
  4. Reduce speed and prepare for a right-hand bend Correct answer.

Explanation

A triangular warning sign with a bend symbol warns that the road curves in the direction shown. The driver should reduce speed before the bend and keep to the correct side of the road. It is not an instruction to turn at a junction.

Question 18Traffic Signs, Signals and Road Markings

A driver is in a lane marked with a white arrow pointing straight ahead and wishes to turn right at the junction. What is the correct action?

  1. Reverse to change into the correct lane
  2. Turn right from the lane because arrows are advisory only
  3. Stop in the lane and wait for a gap
  4. Follow the arrow and turn right only from a lane marked for right turns Correct answer.

Explanation

Lane arrows are regulatory markings that show the direction of travel permitted from each lane. A driver in a straight-ahead lane must continue straight and may not turn from it. The correct approach is to select the properly marked lane in good time before the junction.

Question 19Traffic Signs, Signals and Road Markings

What is the purpose of a hatched area bounded by solid white lines in the centre of the road?

  1. An area that drivers should keep out of and not enter Correct answer.
  2. A lane reserved for overtaking
  3. A parking area for emergency vehicles
  4. A pedestrian refuge where vehicles may stop

Explanation

Hatched areas with solid boundaries separate traffic streams or protect turning vehicles and should not be entered. Drivers must keep outside the marked area unless directed otherwise by signs. They are not parking or stopping places.

Question 20Traffic Signs, Signals and Road Markings

A driver passes a sign showing a red circle with a black '30' and, shortly after, a sign showing a red circle with a black '50'. What is the correct interpretation of the change?

  1. The maximum speed limit rises from 30 km/h to 50 km/h Correct answer.
  2. The recommended speed changes from 30 to 50 km/h
  3. The speed limit ends and no limit applies
  4. The minimum speed rises from 30 km/h to 50 km/h

Explanation

Each red circle with a number sets the maximum legal speed for the stretch that follows. The later sign replaces the earlier limit, so the maximum becomes 50 km/h. The driver may travel up to that limit but not above it.

Question 21Traffic Signs, Signals and Road Markings

At an intersection, a traffic officer signals with an arm raised vertically. How should a driver respond?

  1. Continue if the light is green
  2. Proceed through the intersection immediately
  3. Turn only to the right
  4. Stop and wait for the officer's further signal Correct answer.

Explanation

A raised arm from a traffic officer is a stop signal for the traffic facing the officer. Drivers must stop and wait until the officer gives a signal to proceed. The officer's directions override the traffic lights.

Question 22Traffic Signs, Signals and Road Markings

A driver approaches a junction with a 'Give Way' sign and a broken white line across the approach. What is the legal requirement?

  1. Stop completely before the line in all cases
  2. Proceed without slowing because the line is broken
  3. Give way to traffic on the main road and stop only if necessary Correct answer.
  4. Sound the horn and enter the junction

Explanation

A give-way sign requires the driver to yield to traffic on the road being joined. A complete stop is required only when traffic or safety demands it, unlike a STOP sign. The broken line marks where the driver should wait when giving way.

Question 23Traffic Signs, Signals and Road Markings

A driver sees a sign showing a red circle with a black bicycle inside and no diagonal bar. What does this sign indicate?

  1. A bicycle repair facility is ahead
  2. Cyclists must dismount here
  3. A route or lane is designated for bicycles Correct answer.
  4. Bicycles are prohibited beyond this point

Explanation

A circular sign with a bicycle and no diagonal bar designates a route or lane for bicycles. A prohibition would include a red diagonal bar across the symbol. Drivers of motor vehicles should not enter a lane reserved for bicycles.

Question 24Traffic Signs, Signals and Road Markings

A driver is approaching a junction where the light has been green for some time and the vehicle ahead has stopped suddenly. What is the safest interpretation of the situation?

  1. Sound the horn until the vehicle moves
  2. Reverse away from the junction
  3. Overtake the stopped vehicle to clear the junction
  4. The light must have turned red; stop behind the vehicle and reassess Correct answer.

Explanation

A vehicle stopping unexpectedly on a green light may indicate a hazard, an obstruction, or a signal change. The safe response is to stop behind it, maintain a safe gap, and reassess before proceeding. Overtaking or pressuring the other driver increases collision risk.

Question 25Traffic Signs, Signals and Road Markings

A road has a broken white line along the left edge and a solid white line along the centre. A driver wishes to pass a parked vehicle on the left. What is the correct approach?

  1. Cross the solid centre line to give a wide berth
  2. Wait indefinitely and never pass
  3. Pass the parked vehicle only if it can be done without crossing the solid centre line Correct answer.
  4. Cross the solid line because the edge line is broken

Explanation

The solid centre line prohibits crossing into the opposing lane, so a driver may pass the parked vehicle only if there is sufficient space on the correct side. The broken edge line does not authorise crossing the centre line. If space is insufficient, the driver must wait.

Question 26Traffic Signs, Signals and Road Markings

A driver sees a circular sign with a red border and a white horizontal bar across a blue background. What does this sign require?

  1. No entry for any vehicle Correct answer.
  2. No overtaking permitted
  3. No parking at any time
  4. No stopping on the carriageway

Explanation

A red circle with a white horizontal bar on a blue background is the 'No Entry' sign, meaning vehicles must not proceed past it. It is placed at the end of a one-way street or a restricted access point. Drivers must find an alternative route.

Question 27Traffic Signs, Signals and Road Markings

What does a red triangle sign with a red border and a symbol of a crossroad indicate to a driver?

  1. A roundabout ahead
  2. A railway crossing ahead
  3. A crossroads ahead where another road crosses Correct answer.
  4. A hospital zone ahead

Explanation

Warning signs are triangular with a red border. A crossroad symbol warns that an intersection lies ahead where traffic may cross the driver's path. The driver should reduce speed and be prepared to give way as required.

Question 28Traffic Signs, Signals and Road Markings

A traffic light shows a steady amber (yellow) signal after green. What is the correct action for a driver approaching the stop line?

  1. Accelerate to clear the junction before red
  2. Stop unless it is unsafe to do so Correct answer.
  3. Continue at the same speed without change
  4. Reverse away from the junction

Explanation

A steady amber means the signal is about to change to red. The driver must stop at the stop line unless stopping suddenly would be unsafe, for example when already too close to stop safely. Accelerating to beat the red is dangerous and unlawful.

Question 29Traffic Signs, Signals and Road Markings

A driver sees a flashing amber light at a pedestrian crossing. What does this signal mean?

  1. Give way to pedestrians on the crossing Correct answer.
  2. Treat the crossing as closed
  3. Stop and wait for a green light
  4. Proceed only if no pedestrians are visible anywhere

Explanation

A flashing amber at a pedestrian crossing means drivers must give way to any pedestrian already on the crossing, but may proceed if the crossing is clear. It differs from a steady red, which requires a complete stop.

Question 30Traffic Signs, Signals and Road Markings

What does a solid white line along the centre of a two-way road generally indicate?

  1. The road is one-way
  2. Parking is allowed on the carriageway
  3. Overtaking is prohibited for traffic on the side nearest the line Correct answer.
  4. Overtaking is permitted at all times

Explanation

A continuous (solid) white centre line means drivers on the side nearest the line must not cross it to overtake. It is placed where visibility or road layout makes overtaking unsafe. Crossing it may be permitted only to pass a stationary obstruction, where local rules allow.

Question 31Traffic Signs, Signals and Road Markings

A driver approaches a 'Stop' sign at a junction. What must the driver do?

  1. Stop only if another vehicle is approaching
  2. Come to a complete stop and give way before proceeding Correct answer.
  3. Slow down and proceed if the road looks clear
  4. Sound the horn and continue

Explanation

A Stop sign requires a complete halt at the stop line before entering the junction. The driver must then give way to traffic on the major road before proceeding. Rolling slowly past the sign without stopping is a breach of the rule.

Question 32Traffic Signs, Signals and Road Markings

A blue rectangular sign shows a white symbol of a pedestrian on a crossing. What does this sign indicate?

  1. A footpath ends here
  2. Pedestrians are prohibited
  3. A pedestrian crossing is located here Correct answer.
  4. A school is nearby

Explanation

Blue rectangular signs are informative and indicate facilities or locations. A white pedestrian symbol on blue marks a pedestrian crossing point. Drivers should approach with caution and be ready to give way.

Question 33Traffic Signs, Signals and Road Markings

A driver sees a red circle containing a black motorcycle symbol with no diagonal bar. What does this sign mean?

  1. Motorcycles are prohibited from proceeding Correct answer.
  2. A motorcycle repair shop is ahead
  3. Motorcycles must use the left lane
  4. Motorcycles only may use the road

Explanation

A red circle with a vehicle symbol and no diagonal bar indicates a prohibition on that class of vehicle. Here motorcycles must not proceed beyond the sign. The red circle is the key indicator of a prohibition.

Question 34Traffic Signs, Signals and Road Markings

A driver approaches a junction where a broken white line crosses the approach lane beside a 'Give Way' sign. What is required?

  1. Proceed without checking if the road appears clear
  2. Slow down and give way to traffic on the major road before entering Correct answer.
  3. Wait for a green signal before entering
  4. Stop completely at the line before proceeding

Explanation

A Give Way sign with a broken line requires the driver to slow down, assess traffic on the major road, and give way before entering. A complete stop is only required if traffic demands it. This differs from a Stop sign, which always requires a full halt.

Question 35Traffic Signs, Signals and Road Markings

A driver is in a lane marked with a white arrow pointing left and wishes to continue straight ahead. What should the driver do?

  1. Continue straight and ignore the lane arrow
  2. Follow the arrow and turn left, then find a safe route to the destination Correct answer.
  3. Change lanes immediately without signalling
  4. Stop in the lane and wait for the arrow to change

Explanation

Lane arrows are mandatory direction markings. A left-turn arrow requires the driver to turn left from that lane. A driver who needs to go straight should have selected the correct lane earlier; once committed, the arrow must be obeyed.

Question 36Traffic Signs, Signals and Road Markings

What is the meaning of a yellow box junction with diagonal yellow lines on the road surface?

  1. Overtaking is allowed inside the box
  2. Parking is permitted inside the box
  3. The box marks a bus stop
  4. Do not enter unless the exit is clear, except when turning right Correct answer.

Explanation

A yellow box junction is designed to keep the junction clear. Drivers must not enter unless their exit is clear, with an exception for right turns blocked only by oncoming traffic. Stopping inside the box blocks cross traffic and causes gridlock.

Question 37Traffic Signs, Signals and Road Markings

A driver sees a sign showing a red circle with two vehicles side by side, one red and one black. What does this sign mean?

  1. Two-way traffic ahead
  2. No vehicles carrying passengers
  3. Vehicles must drive in pairs
  4. Overtaking by motor vehicles is prohibited Correct answer.

Explanation

The red circle with two car symbols, one red and one black, is the no overtaking sign. It prohibits motor vehicles from overtaking other motor vehicles on that stretch. The restriction is placed where overtaking would be unsafe.

Question 38Traffic Signs, Signals and Road Markings

A driver sees a hatched area bounded by solid white lines in the centre of the road. What is the correct way to treat it?

  1. Park on it while loading goods
  2. Drive over it to overtake slower vehicles
  3. Do not enter except in an emergency Correct answer.
  4. Use it as a waiting area before turning

Explanation

Hatched areas bounded by solid white lines separate opposing traffic streams or protect turning vehicles. Drivers must not enter them except in an emergency. Using them for overtaking or waiting is dangerous and unlawful.

Question 39Traffic Signs, Signals and Road Markings

A driver approaches a level crossing where a red light is flashing and the barrier is beginning to lower. What should the driver do?

  1. Drive around the barrier before it lowers fully
  2. Proceed quickly if the train appears distant
  3. Stop before the crossing and wait until the signals clear Correct answer.
  4. Sound the horn and continue at speed

Explanation

A flashing red light at a level crossing means a train is approaching. The driver must stop before the crossing and remain stationary until the signals stop and the barrier is fully raised. Attempting to cross is extremely dangerous.

Question 40Traffic Signs, Signals and Road Markings

At a signalised junction, the main light is red but a green arrow pointing left is illuminated. What may the driver do?

  1. Turn left, giving way to pedestrians and traffic already in the junction Correct answer.
  2. Turn right only
  3. Wait for the main light to turn green before moving
  4. Proceed straight ahead as well

Explanation

A green arrow authorises movement in the direction shown even when the main signal is red. The driver may turn left but must still give way to pedestrians and any traffic already lawfully in the junction. Other directions remain prohibited until their signal permits.

Question 41Traffic Signs, Signals and Road Markings

A driver sees a broken white line separating two lanes travelling in the same direction. What does this allow?

  1. Driving on the right side of the line at all times
  2. Overtaking regardless of oncoming traffic
  3. Parking across both lanes
  4. Changing lanes when it is safe and after signalling Correct answer.

Explanation

A broken white line between lanes of the same direction permits lane changes when it is safe to do so. The driver must signal, check mirrors and blind spots, and ensure the manoeuvre does not endanger others. It does not permit parking or driving on the wrong side.

Question 42Traffic Signs, Signals and Road Markings

A driver approaches a pedestrian crossing where a pedestrian is waiting to cross. What should the driver do?

  1. Continue at speed if the pedestrian has not stepped onto the road
  2. Sound the horn to warn the pedestrian
  3. Move to the opposite lane to pass
  4. Slow down and be prepared to stop to let the pedestrian cross Correct answer.

Explanation

Drivers should anticipate pedestrians at marked crossings and be ready to stop. A pedestrian waiting at a crossing indicates an intention to cross, and the driver should slow and yield. Failing to do so endangers vulnerable road users.

Question 43Traffic Signs, Signals and Road Markings

A driver sees a sign showing a red circle with a black '30' inside on a road where the general limit is higher. What does this mean?

  1. The speed limit applies only to heavy vehicles
  2. The maximum speed is 30 in that zone Correct answer.
  3. The road is 30 metres ahead
  4. The minimum speed is 30

Explanation

A red circle with a number sets the maximum permitted speed in kilometres per hour for that stretch of road. It overrides the general limit and applies to all vehicles unless a supplementary plate states otherwise. Exceeding it is an offence.

Question 44Traffic Signs, Signals and Road Markings

A driver sees a triangular warning sign showing a symbol of a slippery road surface. What is the appropriate response?

  1. Maintain speed and brake sharply if the vehicle slides
  2. Reduce speed and avoid sudden braking or steering Correct answer.
  3. Turn on hazard lights and stop in the lane
  4. Accelerate to maintain grip

Explanation

A slippery road warning advises drivers to reduce speed and drive smoothly. Sudden braking or steering can cause a skid on a low-grip surface. Hazard lights and stopping in a live lane would create a new hazard.

Question 45Traffic Signs, Signals and Road Markings

At a junction controlled by a traffic officer, the officer extends an arm horizontally with the palm facing a driver. What should the driver do?

  1. Sound the horn and continue
  2. Turn right immediately
  3. Proceed because the officer is not facing the driver directly
  4. Stop and wait for the officer's further signal Correct answer.

Explanation

Traffic officers' signals take precedence over lights and signs. An extended arm with the palm facing a driver means stop. The driver must remain stopped until the officer signals otherwise.

Question 46Traffic Signs, Signals and Road Markings

A driver approaches a roundabout and sees a broken white line across the entry with a 'Give Way' triangle marking. What is the correct action?

  1. Stop completely and wait for a green light
  2. Enter without looking because roundabout traffic must stop
  3. Give way to traffic already on the roundabout before entering Correct answer.
  4. Drive around the roundabout in either direction

Explanation

At a roundabout, entering traffic must give way to vehicles already circulating. The broken line and triangle marking indicate the give way point. Traffic already on the roundabout has priority, so the driver should slow and enter only when there is a safe gap.

Question 47Traffic Signs, Signals and Road Markings

A driver is travelling behind a large lorry that obscures the traffic lights ahead. As the lorry moves off, the driver sees the light has turned amber. What is the safest response?

  1. Accelerate hard to follow the lorry through
  2. Stop at the line if it is safe to do so, otherwise proceed with caution Correct answer.
  3. Stop in the middle of the junction
  4. Reverse to increase the gap

Explanation

Drivers should maintain a gap that allows them to see signals and stop safely. If the amber appears and stopping is unsafe because the vehicle is already committed, proceeding carefully is the only option. Accelerating to follow the lorry through increases risk.

Question 48Traffic Signs, Signals and Road Markings

A driver on a two-way road sees a broken white centre line on their side and a solid white line on the opposite side. What does this arrangement mean?

  1. Neither direction may overtake
  2. Only the opposing traffic may overtake
  3. The road becomes one-way beyond the marking
  4. The driver may overtake if safe, while opposing traffic may not cross the solid line Correct answer.

Explanation

Where the centre line is broken on one side and solid on the other, the rule applies to the side nearest each driver. The driver beside the broken line may cross to overtake when safe, while the opposing driver beside the solid line may not. This arrangement is used where overtaking is safe in only one direction.

Question 49Traffic Signs, Signals and Road Markings

A driver approaches a junction with a green light but the vehicle ahead has stopped suddenly. What should the driver do?

  1. Stop behind the vehicle and wait, even if the light changes Correct answer.
  2. Sound the horn continuously until the vehicle moves
  3. Drive onto the pavement to pass
  4. Overtake the stopped vehicle on the wrong side

Explanation

A green light does not guarantee a clear path. If the vehicle ahead stops, the driver must stop behind it and avoid entering the junction if the exit is blocked. Overtaking on the wrong side or mounting the pavement endangers pedestrians and other traffic.

Question 50Traffic Signs, Signals and Road Markings

A driver sees a sign with a red circle containing a black bicycle and no diagonal bar, placed beside a path. What does this indicate?

  1. Cycles are prohibited from proceeding beyond the sign Correct answer.
  2. A cycle repair facility is ahead
  3. Cyclists must dismount here
  4. The path is reserved for cyclists only

Explanation

A red circle with a vehicle symbol and no diagonal bar prohibits that class of vehicle. Here cyclists must not proceed past the sign. A route reserved for cyclists would instead be shown on a blue circular sign.