Mongolia Certified Construction Engineer study plan

Reproduce from memory the load-path and limit-state framework for reinforced concrete and steel members, stating design strength and serviceability criteria without notes.

Solve at least 12 hand-calculation problems on bending, shear, and deflection of beams and columns, checking each against code partial factors.

Draw and label the structural systems (frame, shear wall, braced, flat slab) for three building typologies and justify the choice for each.

Compile a one-page formula sheet covering section properties, buckling, and stability coefficients, and verify every entry against the standard.

Analyze a multi-storey frame under gravity and lateral load, producing bending moment and shear diagrams by approximate method.

Classify soils by grain size and plasticity, and select bearing capacity and settlement parameters for two foundation cases.

Compare shallow footing, pile, and raft solutions for a given soil profile and defend one selection in writing.

Interpret a borehole log and groundwater record and translate it into design assumptions for the foundation.

Sequence the works for a cast-in-place concrete frame from excavation to finishing, listing predecessors, inspections, and hold points for each activity.

Produce a resource-loaded schedule for a small project using critical path logic and identify the critical activities.

Describe formwork, scaffolding, and concrete placement methods, and state the curing and stripping criteria to be enforced on site.

Draft the inspection and test plan entries for earthworks, reinforcement, and concrete, naming the acceptance criteria sources.

Specify concrete mix requirements (strength class, exposure, workability, cement type) for three exposure scenarios and justify each parameter.

Design a sampling and testing regime for concrete and reinforcement covering frequency, specimen handling, and acceptance decisions.

Explain the causes and prevention of the main concrete defects and write the corrective action for each.

Evaluate test certificates for cement, aggregate, and steel and identify which results would trigger rejection.

Map the hierarchy of Mongolian building codes and technical regulations, and locate the governing clause for fire resistance, structural safety, and energy performance.

Compare a design against code requirements for egress, ventilation rates, and water supply pressure, documenting each compliance check.

Size a simple water supply and drainage line and a heating or ventilation branch using standard design tables.

List the documentation a state technical inspection expects at handover and match each item to its regulatory basis.

Build a unit-rate estimate for three work items from first principles, covering labour, material, plant, and overhead.

Prepare a bill of quantities for a small building element and price it, then reconcile against a benchmark rate.

Draft the key clauses of a construction contract covering scope, payment, variations, delay, and dispute resolution, and explain the risk allocation in each.

Identify the legal and environmental obligations of the engineer on site, including waste handling, protected zones, and reporting duties.

Develop a site-specific safety plan covering excavation, work at height, lifting, and electrical hazards, with controls ranked by hierarchy of control.

Specify fire safety measures for a construction site: access, extinguishers, hot work permits, and evacuation arrangements.

Write the emergency response procedure for three credible accident scenarios and assign roles.

Audit a hypothetical site description and list at least 15 nonconformities with the corrective action for each.

Complete two full-length timed mock exams under exam conditions and record the score for each domain.

Re-work every missed question, tracing the error to a knowledge gap or a misread, and close each gap with a targeted review note.

Recite the top 30 code clauses and formulas from memory in a rapid self-test and mark those still uncertain.

Consolidate all weekly deliverables into a single indexed revision file organized by domain for final review.