MO Road Signs Practice flashcards
MO Road Signs Practice · Build recall with a focused review session.
32 cards. Read the term and the definition here. The deck at the top of this page is optional.
- Stop sign shape
- Red octagon with white letters. It requires a complete stop at the stop line, crosswalk, or before entering the intersection, followed by yielding to traffic and pedestrians.
- Yield sign shape
- Red-and-white inverted triangle. Slow down, be prepared to stop, and give the right-of-way to cross traffic; stop only if traffic requires it.
- No passing zone pennant
- Yellow-and-black triangular pennant on the left side of the road marking the start of a segment where passing is prohibited in your direction.
- Lane-use arrow signs
- White-on-black arrows above a lane show required movements: a straight arrow means the lane must go straight, a curved arrow means that lane must turn.
- Advisory speed plaque
- Yellow rectangular plaque below a warning sign giving the recommended maximum speed for the condition ahead, such as a curve, under ideal conditions.
- Chevron alignment sign
- Large black-on-yellow arrow-shaped sign placed on the outside of a sharp curve to show the direction of the turn and guide drivers through it.
- Slippery when wet sign
- Yellow diamond showing a car with wavy skid marks. It warns that the surface loses traction when wet; reduce speed and avoid sudden braking or steering.
- Interstate route marker
- Red, white, and blue shield with numerals. Even numbers run east-west and odd numbers run north-south; numbers increase from south to north and west to east.
- Mile marker sign
- Small green sign with white numerals placed at one-mile intervals along the shoulder; it identifies your location for emergencies and navigation.
- Service sign colors
- Blue signs with white symbols mark services such as gas, food, lodging, and hospitals; brown signs mark recreation and cultural sites; green signs mark destinations.
- Flagger symbol sign
- Orange diamond showing a person holding a flag. It warns that a flagger controls traffic ahead, and the flagger's signals override signs and signals.
- Channelizing devices
- Orange cones, drums, and vertical panels that define the temporary path through a work zone; do not cross them, and follow temporary markings.
- Work zone speed limit
- Posted speed limit sign in a work zone; the reduced limit is enforceable where the sign is placed, not automatically at the first orange warning sign.
- School advance warning sign
- Fluorescent yellow-green pentagon with a black pedestrian symbol warning of a school crossing ahead; slow down and watch for children.
- Pedestrian signal meanings
- A white walking person means proceed; a flashing orange hand means do not start; a solid orange hand means stop and do not enter the crosswalk.
- School bus stop law
- On an undivided road, traffic in both directions must stop when a school bus flashes red lights and extends its stop sign; a median separates the directions.
- Crossbuck sign
- White X-shaped sign with 'RAILROAD CROSSING' letters marking the crossing; yield to trains, and a crossbuck alone means no active warning devices.
- Railroad advance warning
- Yellow circular sign with 'RR' and a diagonal line warning of a crossing ahead; a plaque below gives the number of tracks.
- Railroad pavement marking
- White 'X' with 'RR' painted on the pavement warning of a crossing ahead; a stop line before the tracks marks where to stop.
- Red sign meaning
- Red indicates stop, yield, or prohibition; it appears on stop signs, yield signs, do-not-enter signs, and prohibition symbols with a diagonal slash.
- Yellow diamond meaning
- Yellow diamonds are warning signs; the black symbol or words inside show the condition ahead, such as a curve, intersection, or surface hazard.
- Circle and slash
- Red circle with a diagonal slash means 'do not'; the black symbol inside shows the prohibited action, such as no U-turn or no trucks.
- Double solid yellow line
- Two solid yellow lines separating opposite directions of traffic; passing is prohibited in both directions, and the lines should not be crossed.
- Edge line markings
- Solid white line marking the right edge of the roadway; a solid yellow line may mark the left edge on divided highways.
- HOV lane marking
- White diamond symbol painted in a lane marking a high-occupancy vehicle or special-use lane; check the accompanying sign for eligibility.
- Object marker
- Yellow-and-black striped marker at the end of a barrier or island warning of a hazard; a type 3 marker is a vertical rectangle with diagonal stripes.
- Do not enter sign
- Red square with a white horizontal bar and the words 'DO NOT ENTER'; it marks a one-way roadway against your direction of travel.
- Wrong way sign
- Red rectangle with white letters reading 'WRONG WAY'; seeing it means you are driving against traffic and should stop and turn around when safe.
- Roundabout yield rule
- At a roundabout, yield to traffic already in the circle; enter only when there is a gap, and do not stop inside the circle unless traffic requires it.
- Steep grade warning
- Yellow diamond showing a truck on a downgrade with a percent grade; downshift before descending to avoid brake fade on long grades.
- Exit-only lane sign
- Green sign with a white arrow pointing down and to the right marking a lane that becomes an exit-only lane; through traffic should move left.
- U.S. route marker
- White shield with black numerals identifying a U.S. highway; Interstate markers are red, white, and blue shields with numerals.