BEM PCE Part B Mechanical study guide
BEM PCE Part B Mechanical · Work through your exam, one topic at a time.
The Professional Competency Examination (PCE) is the assessment that the Board of Engineers Malaysia (BEM) describes as being conducted "for the purpose of issuing a Practising Certificate to the Professional Engineer." In other words, it sits after registration as a Professional Engineer and gates the Practising Certificate - the credential that lets a Professional Engineer practise in the regulated sense. The Mechanical route is the PCE stream for candidates whose registered engineering background is mechanical. This page is an independent study resource for candidates preparing for that Mechanical paper; it is not affiliated with, endorsed by, or operated by BEM, and it is not an official source of examination information. Because the public BEM source does not enumerate a Part B mechanical syllabus, question count, duration, pass mark, fee, or retake rule, this page does not invent them. Instead, preparation should be built around three pillars: the legal and regulatory framework for professional practice in Malaysia (the Registration of Engineers Act 1967 (Revised 2015) and the Registration of Engineers Regulations 1990 (Revised 2015), both of which BEM lists as available material); professional conduct, ethics and practice obligations; and mechanical engineering judgement applied to realistic design, safety, and consultancy scenarios. Use the official BEM website and its PCE announcements for administrative details, and treat this page as a study aid only. Topics on this exam: Mechanical Engineering (Part B domain structure not enumerated in source). The BEM PCE Part B Mechanical study guide has 1 section and about 393 words.
01Mechanical Engineering
The Part B mechanical paper assesses whether you can practise as a professional mechanical engineer in Malaysia: applied thermofluids, machine design, building services, manufacturing, and the statutory duties that attach to design approval, inspection, and certification. It tests judgment under the FMA, OSHA, EQA, and UBBL, not just calculations. Factories and Machinery Act 1967 (FMA) and its regulations govern pressure vessels and lifting equipment; design approval and a Certificate of Fitness (CF) come from DOSH. OSHA 1994 imposes general duties on employers and designers; EQA 1974 controls scheduled waste, emissions, and effluent; UBBL 1984 governs building services.
393 words, about 2 minMore study resources for BEM PCE Part B Mechanical
- Practice questionsIn a bolted joint, which quantity is used to size the bolt for fatigue when the joint is preloaded and the external load fluctuates?
- FlashcardsSection modulus. Ratio Z = I/c of the second moment of area to the distance from the neutral axis to the extreme fibre; bending stress is σ = M/Z.
- Cheat sheetStatic equilibrium requires ΣF = 0 and ΣM = 0 about any point; for a 2D body this gives three independent equations, so a determinate free body yields at most three unknowns.
- Key termsStress. Internal force per unit area within a material, calculated as load divided by cross-sectional area.
- Study planInventory the full Part B mechanical syllabus and map each topic to a confidence rating from 1 to 5, so the weakest areas are named explicitly rather than assumed.
- Common mistakesThe thin-wall formula is the only one most candidates memorise, so it becomes a reflex; when a thick-walled cylinder appears, the wall stress is under-predicted and the answer chosen is the thin-wall value.
- Exam-day guideBring the original, unexpired ID in the name used on your registration.