I85PREP
⌘ K
FRSC Motorcycle Rider's Licence Theory Test study materials
FRSC Motorcycle Rider's Licence Theory Test study resources

FRSC Motorcycle Rider's Licence Theory Test practice questions

One question at a time. Build your FRSC Motorcycle Rider's Licence Theory Test understanding.

First 50 of 199 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Road Signs, Signals and Markings

On an Irish road, what does a circular sign with a red border and a white background generally indicate?

  1. A motorway regulation
  2. A mandatory instruction
  3. A warning of a hazard ahead
  4. A prohibition or restriction Correct answer.

Explanation

In the Irish sign system, red-bordered circles carry regulatory prohibitions and restrictions, such as speed limits or banned manoeuvres. Warning signs are instead triangular with a red border, and mandatory instructions appear as blue circles.

Question 2Road Signs, Signals and Markings

A rider approaching a yellow diamond-shaped sign should understand that it is:

  1. A parking control sign for the area
  2. A warning sign used at roadworks or temporary hazards Correct answer.
  3. A permanent speed restriction sign
  4. A route confirmation sign for tourists

Explanation

Yellow diamond-shaped signs are used in Ireland for temporary warnings, most often around roadworks, and they supplement or replace standard warnings during works. Permanent hazard warnings use the standard triangular format.

Question 3Road Signs, Signals and Markings

What is the meaning of a continuous white line along the centre of the carriageway?

  1. No overtaking or crossing the line, with limited exceptions Correct answer.
  2. The line marks the edge of the carriageway
  3. Overtaking is permitted if the road ahead is clear
  4. The lane is reserved for buses during peak hours

Explanation

A continuous centre line means a driver must not cross it to overtake or change lanes, apart from narrow exceptions such as entering a premises or passing a stationary obstruction where it is safe. A broken line permits overtaking when it is safe to do so.

Question 4Road Signs, Signals and Markings

A rider sees a broken white line in the centre of the road. What does it permit?

  1. Nothing; it is decorative
  2. Driving on the wrong side at all times
  3. Parking on the carriageway
  4. Overtaking when it is safe and legal to do so Correct answer.

Explanation

A broken centre line indicates that a driver may cross it to overtake or change lanes, provided the manoeuvre is safe and no other restriction applies. It does not create a right to overtake; observation and judgement still govern the decision.

Question 5Road Signs, Signals and Markings

What must a rider do when a traffic light shows a flashing amber light at a pelican crossing?

  1. Sound the horn before proceeding
  2. Stop and wait until the light turns green
  3. Proceed only if the crossing is clear of pedestrians Correct answer.
  4. Treat it as a red light and stop

Explanation

At a pelican crossing, a flashing amber signal means the driver may proceed but must yield to any pedestrian still on the crossing. It is not equivalent to red or green; the duty is to check the crossing is clear before moving.

Question 6Road Signs, Signals and Markings

A rider approaches a junction controlled by a stop sign. What is required?

  1. Stop only if another vehicle is visible
  2. Yield only to traffic from the right
  3. Slow down and continue if nothing is coming
  4. Come to a complete stop and give way before proceeding Correct answer.

Explanation

A stop sign requires a complete stop at the stop line, followed by observation and giving way to traffic before entering the junction. Rolling slowly through without stopping is an offence even when the road appears clear.

Question 7Road Signs, Signals and Markings

What does a single yellow line along the edge of the carriageway generally indicate?

  1. Waiting restrictions during specified times shown on nearby plates Correct answer.
  2. A bus stop clearway
  3. No parking at any time
  4. A cycle lane boundary

Explanation

A single yellow line marks waiting restrictions that apply during the times shown on accompanying signs or plates. A double yellow line indicates no waiting at any time.

Question 8Road Signs, Signals and Markings

A blue circular sign showing a white arrow pointing left means the rider must:

  1. Turn left ahead
  2. Park to the left
  3. Keep left of the obstacle or traffic island Correct answer.
  4. Give way to traffic from the left

Explanation

A blue circular sign with a white arrow pointing down-left is a mandatory 'keep left' instruction, directing traffic to pass on the left of an island or obstruction. It is not a directional sign for a turn ahead.

Question 9Road Signs, Signals and Markings

A rider is travelling on a road with a broken white line on the left edge and a continuous white line on the right of the lane. What does the left edge line help indicate?

  1. A place where overtaking is permitted
  2. The boundary of the carriageway edge Correct answer.
  3. A pedestrian crossing point
  4. A bus lane boundary

Explanation

Edge lines mark the boundary of the carriageway, helping a rider judge lane position, particularly in poor visibility or darkness. They do not grant overtaking rights or mark crossings.

Question 10Road Signs, Signals and Markings

At a junction, a rider sees a yield sign (give way). What is the correct action?

  1. Stop completely before entering the junction
  2. Accelerate to merge ahead of other traffic
  3. Slow down, be ready to stop, and give way to traffic on the major road Correct answer.
  4. Sound the horn and proceed

Explanation

A yield sign requires the rider to slow, observe, and give way to traffic on the road being joined, stopping only if necessary. Unlike a stop sign, a complete stop is not mandatory when the way is clear.

Question 11Road Signs, Signals and Markings

A rider sees a sign showing a red circle with a motorcycle symbol inside on a blue background. What does this indicate?

  1. A motorcycle parking area
  2. A route recommended for motorcycles
  3. Motorcycles are prohibited
  4. A mandatory route for motorcycles only Correct answer.

Explanation

A blue circular sign bearing a white motorcycle symbol is a mandatory instruction indicating a route or facility for motorcycles. A prohibition would appear as a red-bordered circle with the symbol crossed or in red.

Question 12Road Signs, Signals and Markings

What does a hatched area bounded by continuous white lines in the centre of the road mean for a rider?

  1. It is a cycle lane
  2. It is a lane for overtaking
  3. It is an area that must not be entered except in an emergency Correct answer.
  4. It is a parking bay

Explanation

A hatched area bordered by continuous white lines, often called a ghost island, must not be entered except in an emergency. It exists to separate traffic streams and protect turning vehicles.

Question 13Road Signs, Signals and Markings

A rider approaches a traffic light showing a green arrow pointing right while the main light is red. What does this mean?

  1. The arrow has no legal meaning
  2. Proceed in the direction of the arrow if the way is clear Correct answer.
  3. Wait until the main light turns green
  4. Stop and turn right only after the light changes

Explanation

A green arrow permits movement in the direction indicated even when the main light is red, provided the way is clear. Other traffic may still be moving under a different phase, so observation remains essential.

Question 14Road Signs, Signals and Markings

A rider sees a warning sign showing a series of bends, the first to the right. What is the appropriate response?

  1. Overtake any slower vehicle before the first bend
  2. Accelerate to get through the bends quickly
  3. Reduce speed before the bends and position for the first right-hand curve Correct answer.
  4. Maintain speed and take the bends in the centre of the road

Explanation

A bends warning sign alerts the rider to a series of curves, and the correct response is to slow before entering them and set a safe position for the first curve. Overtaking on bends is hazardous because sight lines are restricted.

Question 15Road Signs, Signals and Markings

What does a solid white line with a broken white line alongside it mean on a two-way road?

  1. Overtaking is prohibited on both sides at all times
  2. Overtaking is permitted on both sides
  3. Overtaking is permitted only on the side with the broken line Correct answer.
  4. The road is one-way

Explanation

Where a continuous and a broken line run together, the rule follows the line nearest the driver. A driver with the broken line on their side may cross to overtake when safe; the driver facing the continuous line may not.

Question 16Road Signs, Signals and Markings

A rider approaches a level crossing with a sign showing a steam train symbol and no barriers. What precaution is required?

  1. Stop only if a train is visible
  2. Slow down, look both ways, and be prepared to stop Correct answer.
  3. Sound the horn continuously while crossing
  4. Proceed at normal speed as trains are infrequent

Explanation

An unguarded level crossing requires the rider to slow, look in both directions, and be ready to stop for an approaching train. Trains cannot stop quickly, and sight lines may be limited.

Question 17Road Signs, Signals and Markings

What is indicated by a box junction marked with yellow cross-hatching?

  1. A rider must stop inside the box to give way
  2. The area is reserved for buses
  3. A rider may enter only if the exit is clear, except when turning right Correct answer.
  4. The area is a pedestrian refuge

Explanation

A yellow box junction must not be entered unless the exit is clear, so the rider does not block the junction. The exception is when turning right and prevented from doing so only by oncoming traffic.

Question 18Road Signs, Signals and Markings

A rider sees a sign showing a red circle with a white horizontal bar on a red background. What does it mean?

  1. Stop and give way
  2. End of restrictions
  3. No entry for vehicular traffic Correct answer.
  4. No parking

Explanation

The 'no entry' sign is a red circle with a white horizontal bar, prohibiting vehicles from entering that road. It is often paired with a one-way street arrangement.

Question 19Road Signs, Signals and Markings

A rider is on a motorway and sees a sign showing a blue background with a white motorway symbol crossed by a red diagonal line. What does it indicate?

  1. A toll plaza ahead
  2. The end of motorway regulations Correct answer.
  3. A motorway service area ahead
  4. The start of a motorway

Explanation

A motorway symbol crossed by a red diagonal line marks the end of motorway regulations, meaning the road ahead is no longer a motorway and different rules and speed limits apply. Riders should adjust speed and expectations accordingly.

Question 20Road Signs, Signals and Markings

A rider sees a triangular warning sign depicting a bicycle. What hazard does it indicate?

  1. Cyclists may be crossing or entering the road ahead Correct answer.
  2. A cycle lane begins immediately
  3. A bicycle parking area is nearby
  4. Cycles are prohibited beyond this point

Explanation

A triangular sign with a bicycle warns that cyclists may be crossing or joining the road ahead, so the rider should reduce speed and allow room. It warns of a hazard rather than imposing a prohibition.

Question 21Road Signs, Signals and Markings

A rider sees chevron markings pointing left on a sharp bend. What do these markings do?

  1. Show a parking restriction
  2. Indicate the direction of the bend and guide the rider through it Correct answer.
  3. Mark a bus stop
  4. Indicate a pedestrian crossing

Explanation

Chevron markings on a bend indicate the direction of the curve and help the rider judge the road alignment, particularly in poor visibility. They are a guidance aid, not a regulatory prohibition.

Question 22Road Signs, Signals and Markings

A rider approaches a traffic light showing a red light and a green filter arrow pointing straight ahead. What should the rider do?

  1. Stop and wait, because the red light applies to all movements
  2. Proceed in any direction
  3. Turn back because the signals conflict
  4. Proceed straight ahead if the way is clear, because the green arrow applies Correct answer.

Explanation

A green filter arrow authorises only the movement it indicates, even when the main light is red. The rider may proceed straight ahead if clear but must not make other movements until permitted.

Question 23Road Signs, Signals and Markings

A rider sees a broken white line marking the edge of a bus lane that operates at certain times. Outside those times, what generally applies?

  1. The lane is closed to all traffic
  2. The bus lane restriction still applies at all times
  3. The lane may be used by other traffic subject to any other restrictions Correct answer.
  4. The lane becomes a parking area

Explanation

Where a bus lane operates only during specified times shown on signs, other traffic may generally use it outside those hours, subject to any other restrictions. The signs define the operational period, and the markings alone do not impose an all-time restriction.

Question 24Road Signs, Signals and Markings

A rider is passing a hatched central reservation area bounded by a broken white line. What is the correct interpretation?

  1. The area is a mandatory stopping zone
  2. The area is a pedestrian crossing
  3. The area may be entered to overtake when safe Correct answer.
  4. The area must never be entered under any circumstances

Explanation

Where a hatched area is bounded by a broken line, it may be entered when necessary and safe, for example to overtake, whereas a hatched area bounded by continuous lines must not be entered except in an emergency. The boundary line type determines the rule.

Question 25Road Signs, Signals and Markings

A rider sees a sign with a red circle containing the number 50 and the word 'km/h' beneath it. What does this indicate?

  1. A minimum speed of 50 km/h
  2. A maximum speed limit of 50 km/h Correct answer.
  3. A distance of 50 km to the next town
  4. A recommended speed of 50 km/h

Explanation

A red-bordered circle containing a number is a regulatory speed limit sign, so 50 km/h is the maximum permitted speed. Minimum speeds are shown on blue circular signs, and distances appear on directional signs.

Question 26Road Signs, Signals and Markings

A rider sees a circular sign with a red border containing a black motorcycle symbol and a black car symbol side by side. What does this sign mean?

  1. Motorcycles and cars must use separate lanes ahead
  2. Motorcycles are permitted but cars are prohibited
  3. A parking area for motorcycles and cars is ahead
  4. Motorcycles and cars are prohibited from entering Correct answer.

Explanation

A red-bordered circle is a prohibitory sign, and the symbols inside show which road users are banned. Showing a motorcycle and a car together means neither may proceed past the sign. Riders must find an alternative route rather than continue.

Question 27Road Signs, Signals and Markings

A rider approaches a junction and sees a yellow box junction with cross-hatching painted on the carriageway. The rider intends to turn right. When may the rider enter the box?

  1. At any time, provided the rider keeps moving slowly across the box
  2. Whenever the vehicle ahead has already entered the box
  3. Only when a green light shows, regardless of the exit
  4. Only when the exit is clear, or when waiting to turn right is blocked only by oncoming traffic Correct answer.

Explanation

A yellow box junction must not be entered unless the exit road is clear. The single exception is a right-turning rider who is stopped only by oncoming traffic or other right-turners. Waiting inside the box in any other situation obstructs cross traffic.

Question 28Road Signs, Signals and Markings

A rider sees a triangular warning sign showing a motorcycle symbol. What hazard does this sign warn of?

  1. A motorcycle repair workshop is located ahead
  2. A motorcycle racing event is taking place on the road ahead
  3. Motorcycles commonly emerge from a side road or cross the road ahead Correct answer.
  4. Motorcycles are banned from the road ahead

Explanation

Triangular signs give warning of a hazard ahead, and the motorcycle symbol warns that motorcycles may be entering or crossing the road. The rider should reduce speed and stay alert for machines emerging. Warning triangles never impose a ban or mark a facility.

Question 29Road Signs, Signals and Markings

A rider sees a traffic light showing a flashing amber light at a pelican-type crossing. What is required?

  1. Treat the crossing as closed and continue without slowing
  2. Sound the horn to warn pedestrians before proceeding
  3. Give way to pedestrians still on the crossing, otherwise proceed if the way is clear Correct answer.
  4. Stop and wait until a steady green light appears

Explanation

A flashing amber signal means pedestrians have priority if they are still crossing, but the rider may proceed once the crossing is clear. It is not the same as a red light, so a full stop is not required when nobody is on the crossing. Approaching with care is essential.

Question 30Road Signs, Signals and Markings

A rider sees a broken white line running along the centre of a two-way road. What does this line permit?

  1. Overtaking when it is safe and the road ahead is clear Correct answer.
  2. Overtaking only by vehicles travelling in the opposite direction
  3. No overtaking at any time
  4. Overtaking only during daylight hours

Explanation

A broken white centre line separates opposing streams of traffic and permits crossing to overtake when it is safe. The rider must still judge sight lines, speed and oncoming traffic before committing. The line does not create a one-way restriction.

Question 31Road Signs, Signals and Markings

A rider approaches a junction where the traffic light is dark and a garda is directing traffic with arms extended horizontally sideways. What should the rider do?

  1. Proceed, because the sideways arms apply only to cross traffic
  2. Continue only if the vehicle ahead also continues
  3. Stop, because traffic approaching from front and rear must halt Correct answer.
  4. Proceed slowly while watching the garda's other hand

Explanation

A garda's signals override traffic lights and signs. Arms extended horizontally to the sides mean traffic approaching from the front and from behind must stop. The rider should obey the officer rather than the dark signal head.

Question 32Road Signs, Signals and Markings

A rider sees a rectangular blue sign showing a white bicycle symbol. What does this sign indicate?

  1. A route or lane designated for cyclists Correct answer.
  2. Cyclists must dismount and walk
  3. Cyclists are prohibited beyond the sign
  4. A bicycle shop is located ahead

Explanation

Blue rectangular signs give information, and a white bicycle on blue marks a route or lane intended for cyclists. Riders should expect cyclists in that area and avoid obstructing the facility. The sign does not impose a ban on cyclists.

Question 33Road Signs, Signals and Markings

A rider is travelling on a road where a continuous white line marks the left edge and the rider needs to enter a property on that side. What is the correct approach?

  1. Reverse along the hard shoulder until the entrance is reached
  2. Cross the edge line only after stopping completely on the carriageway
  3. Cross the edge line only if it is safe and no other marking forbids it, treating it as a guide to the carriageway edge Correct answer.
  4. Never cross the edge line under any circumstances

Explanation

An edge line marks the boundary of the carriageway and is primarily a guide, so a rider may cross it to reach a property when it is safe. The rider must still check for pedestrians, cyclists and surface changes beyond the line. It is not an absolute prohibition like a continuous centre line.

Question 34Road Signs, Signals and Markings

A rider sees a warning sign showing a traffic light symbol on a triangular plate. What does this warn of?

  1. A junction with no signals at all
  2. A pedestrian crossing without lights
  3. A traffic light that is permanently out of order
  4. Traffic signals ahead that may be hidden until close Correct answer.

Explanation

The triangular traffic-light symbol warns that signals are ahead, often where they are difficult to see until the rider is close. The rider should reduce speed and be ready to stop. It does not describe the condition of the lights themselves.

Question 35Road Signs, Signals and Markings

A rider sees a sign with a red circle containing a white arrow pointing straight up, crossed by a red diagonal bar. What does it mean?

  1. No entry for vehicles proceeding straight ahead Correct answer.
  2. Straight ahead is the recommended route
  3. Vehicles must turn around immediately
  4. One-way traffic continues straight ahead

Explanation

A red circle with a red diagonal bar cancels or prohibits the movement shown by the symbol. With a straight-ahead arrow, it means vehicles may not continue straight past the sign. The rider must choose a permitted direction instead.

Question 36Road Signs, Signals and Markings

A rider sees a series of white arrows painted on the carriageway pointing towards the rider. What do these markings indicate?

  1. Overtaking is permitted in the arrowed lane
  2. The rider is travelling against the intended direction of a one-way street Correct answer.
  3. A cycle lane begins at that point
  4. The rider should increase speed to clear the area

Explanation

Carriageway arrows are painted to be read by traffic travelling in the correct direction. Arrows pointing towards the rider show that the lane is meant for oncoming traffic, typically on a one-way street entered the wrong way. The rider should stop safely and turn around.

Question 37Road Signs, Signals and Markings

A rider sees a circular sign with a red border containing the word 'STOP' in white on a red background above a white bar. How does this differ from a stop line on the road?

  1. The sign warns of a stop ahead but does not require stopping
  2. The sign applies only to heavy vehicles
  3. The sign is advisory, while the line is mandatory
  4. The sign orders a stop at the line, while the line alone marks where to stop Correct answer.

Explanation

The octagonal stop sign imposes a legal requirement to stop, and the associated road marking shows exactly where the stop must be made. The line by itself is the position marker rather than the instruction. Riders must stop at the line and give way before proceeding.

Question 38Road Signs, Signals and Markings

A rider sees a sign showing a red circle with a white horizontal bar across it on a blue background. What does this indicate?

  1. No parking at any time
  2. Give way to oncoming traffic
  3. No entry for vehicular traffic Correct answer.
  4. End of a restriction

Explanation

The no-entry sign is a red circle with a white horizontal bar, often mounted on a blue background for contrast. It means vehicles must not enter that road from this direction. Riders must use another route.

Question 39Road Signs, Signals and Markings

A rider sees a broken white line separating a bus lane from the general traffic lane, and the sign shows operating times of 7am to 7pm Monday to Saturday. It is Sunday. What applies?

  1. The rider may use the lane only before 7am
  2. The bus lane applies every day regardless of the sign
  3. The bus lane restriction does not operate, so the rider may use the lane Correct answer.
  4. The rider must never enter a bus lane at any time

Explanation

Bus lane signs state the days and hours during which the restriction applies, and outside those times the lane is available to other traffic. On a Sunday the stated operating period does not apply. The rider should still check for any local variations shown on the sign.

Question 40Road Signs, Signals and Markings

A rider approaches a junction where the road marking is a broken white line across the mouth of a side road, together with a yield sign. What does the broken line reinforce?

  1. That the rider must stop completely before entering
  2. That the rider must give way to traffic on the major road Correct answer.
  3. That the rider has priority over the major road
  4. That the side road is closed to motorcycles

Explanation

A broken white line across the mouth of a side road accompanies a yield sign and marks the point where the rider must give way. Traffic on the major road has priority. A complete stop is only needed if the situation requires it.

Question 41Rules of the Road and Right of Way

In Ireland, what is the maximum number of people a motorcycle may carry when it is being used on a public road?

  1. One person in total, the rider only Correct answer.
  2. As many as the seat will physically hold
  3. Three people in total if a sidecar is fitted
  4. Two people in total, including the rider

Explanation

A motorcycle may carry only the rider unless it is designed and fitted with a proper pillion seat and footrests, in which case one passenger may be carried. Carrying more than one passenger is not permitted on a solo motorcycle. A sidecar combination is treated separately and does not allow three people on the machine itself.

Question 42Rules of the Road and Right of Way

You are approaching a junction where a STOP sign faces you. What must you do before proceeding?

  1. Sound your horn and edge out slowly
  2. Stop only if another vehicle is approaching
  3. Come to a complete stop at the stop line and give way Correct answer.
  4. Slow down and continue if the road looks clear

Explanation

A STOP sign requires a full stop at the stop line, not merely slowing down. You must then give way to traffic on the road you are joining before moving off. Rolling through the line is an offence even when the road appears empty.

Question 43Rules of the Road and Right of Way

What does a broken white centre line on a two-way road generally mean for a motorcyclist?

  1. Overtaking is prohibited at all times
  2. It reserves the lane for buses only
  3. It marks the edge of the carriageway
  4. You may cross it to overtake when it is safe to do so Correct answer.

Explanation

A broken white centre line separates opposing streams of traffic and may be crossed to overtake or turn when it is safe. A continuous white line, by contrast, must not be crossed except in limited circumstances. The line does not reserve the lane for any vehicle class.

Question 44Rules of the Road and Right of Way

At a standard roundabout with no traffic lights, who has right of way?

  1. Traffic already on the roundabout Correct answer.
  2. Traffic approaching from the right only
  3. Traffic entering the roundabout
  4. Whichever vehicle is larger

Explanation

At a standard roundabout you must yield to traffic already circulating on the roundabout before you enter. You should approach at a speed that lets you stop if necessary. Once on the roundabout you have priority over vehicles waiting to enter.

Question 45Rules of the Road and Right of Way

What is the national speed limit on a motorway in Ireland for a motorcycle?

  1. 100 km/h
  2. 80 km/h
  3. 120 km/h Correct answer.
  4. 110 km/h

Explanation

The motorway speed limit in Ireland is 120 km/h, and this applies to motorcycles as it does to cars. Lower limits apply on other road types, such as 100 km/h on national roads. The limit is a maximum, not a target, and conditions may require a lower speed.

Question 46Rules of the Road and Right of Way

When may you lawfully use your motorcycle's horn in a built-up area?

  1. Only to warn other road users of danger Correct answer.
  2. To signal that you intend to overtake
  3. To greet another rider you recognise
  4. Whenever you are delayed in traffic

Explanation

The horn is a warning device and should be used only to alert others to danger. It must not be used as a greeting, to express annoyance, or as a substitute for proper observation. In built-up areas between 23:00 and 07:00, horn use is further restricted to cases of danger.

Question 47Rules of the Road and Right of Way

You are riding at night and a vehicle approaches from the opposite direction. What should you do with your headlamp?

  1. Switch off your headlamp briefly
  2. Dip your headlamp to avoid dazzling the other driver Correct answer.
  3. Flash your headlamp repeatedly
  4. Switch to main beam to see better

Explanation

You must dip your headlamp when meeting oncoming traffic so that you do not dazzle the other road user. Main beam should be used only when it will not affect others, for example on unlit roads with no traffic ahead. Dipping preserves your own visibility while protecting others.

Question 48Rules of the Road and Right of Way

What does a yellow box junction marking require of a motorcyclist?

  1. You may not enter the box under any circumstances
  2. You may stop in the box if traffic ahead is queuing
  3. You may enter only if your exit is clear, apart from when turning right Correct answer.
  4. You must always come to a stop inside the box

Explanation

A yellow box junction must not be entered unless you can clear it without stopping. The exception is when you are turning right and are prevented from doing so only by oncoming traffic. Waiting in the box because traffic ahead has stopped is not permitted.

Question 49Rules of the Road and Right of Way

You intend to turn left at a junction. A cyclist is travelling straight ahead on your left. What is the correct action?

  1. Move alongside the cyclist and turn together
  2. Accelerate to turn before the cyclist reaches the junction
  3. Sound your horn and turn across the cyclist
  4. Hold back and let the cyclist proceed before you turn Correct answer.

Explanation

A cyclist going straight ahead has priority over a vehicle turning left across their path. You should hold back, check your mirrors and blind spot, and complete the turn only when the cyclist has passed. Cutting across a cyclist is a common cause of collisions at junctions.

Question 50Rules of the Road and Right of Way

You are following a large truck on a wet road. Why should you increase your following distance beyond the normal two-second rule?

  1. Because motorcycles are not allowed within two seconds of a truck
  2. Because spray and reduced visibility limit your view and the truck's stopping distance is longer Correct answer.
  3. Because trucks are required to stop suddenly at junctions
  4. Because the truck will always signal before braking

Explanation

Large vehicles throw up spray in wet conditions, obscuring your view and reducing your ability to anticipate hazards. Their longer stopping distances also mean you need more time to react if they brake. A four-second gap is a sensible minimum in wet weather behind a truck.