NM Asbestos Abatement flashcards
NM Asbestos Abatement · Build recall with a focused review session.
32 cards. Read the term and the definition here. The deck at the top of this page is optional.
- NM asbestos governing rule
- 20.11.31 NMAC, the New Mexico Environment Department Occupational Health and Safety Bureau rule that sets asbestos abatement certification, notification, work practice, and clearance requirements in New Mexico.
- NM Asbestos Control Program
- The unit within the New Mexico Environment Department's Occupational Health and Safety Bureau that certifies asbestos workers, supervisors, inspectors, planners, designers, and air-monitoring technicians and enforces the state asbestos rule.
- Abatement worker certification
- A New Mexico credential authorizing an individual to perform asbestos abatement under the direction of a certified supervisor, obtained after accredited training and passing the state exam.
- Abatement supervisor certification
- A New Mexico credential allowing an individual to direct abatement work on site, enforce the abatement plan and work practices, and supervise certified workers during a regulated abatement project.
- Abatement contractor license
- The company-level authorization required to contract for asbestos abatement in New Mexico; it is separate from individual worker or supervisor certification and is held by the business entity.
- Inspector certification
- A New Mexico credential permitting an individual to conduct asbestos inspections, collect bulk samples, and assess the condition of suspect materials in buildings; it does not authorize abatement or supervision.
- Management planner certification
- A New Mexico credential allowing an individual to interpret inspection findings and develop asbestos management plans, including hazard assessment and response actions for building owners.
- Project designer certification
- A New Mexico credential authorizing preparation of abatement project designs, including scope, work practices, containment strategy, and clearance criteria, for regulated asbestos projects.
- Air-monitoring technician certification
- A New Mexico credential allowing an individual to conduct air sampling and analysis supporting abatement projects, including clearance sampling, under the state asbestos rule.
- Annual refresher requirement
- Abatement workers, supervisors, and air-monitoring technicians must complete discipline-specific refresher training each year before renewing New Mexico certification; expiration bars regulated abatement work.
- Accredited training prerequisite
- Before sitting for New Mexico certification exams, candidates must complete a training course for their discipline from an EPA/AHERA-accredited or state-approved provider covering work practices and regulations.
- State certification examination
- A written examination administered for each New Mexico asbestos discipline; passing it, combined with valid training, is required before the certificate is issued.
- Abatement notification submission
- Before starting regulated abatement, the certified contractor files a notification with the NM Asbestos Control Program identifying the site, scope, square footage, dates, contractor, and on-site supervisor.
- On-site supervisor presence
- A certified supervisor must be physically present whenever abatement activity occurs, directing work practices, worker protection, containment integrity, and compliance with the project plan.
- Discipline-specific authority
- New Mexico certification authorizes only the duties of the named discipline; a worker cannot supervise, an inspector cannot abate, and credentials are not transferable between individuals or disciplines.
- Certification non-transferability
- A New Mexico asbestos certificate belongs to one individual and cannot be lent, sold, or used by another person or company; misuse is grounds for enforcement action.
- Recordkeeping obligation
- Certified persons and contractors must keep training certificates, medical surveillance records, and certification documentation available for inspection by the NM Asbestos Control Program.
- Lapsed certification effect
- Once a New Mexico asbestos certificate expires or is suspended, the holder may not perform regulated abatement, supervision, inspection, or air monitoring until certification is reinstated.
- Regulated asbestos project
- An abatement activity of specified threshold size or involving certain friable materials that triggers notification, certified supervision, work practice standards, and clearance requirements under the state rule.
- Contractor responsibility for workers
- The licensed abatement contractor ensures every on-site worker holds current New Mexico certification for the tasks performed and maintains training and medical records for those workers.
- Medical surveillance prerequisite
- Abatement workers and supervisors must be enrolled in a medical surveillance program with required examinations; documentation supports certification and must be available to regulators.
- Clearance air sampling
- Post-abatement air sampling performed by a certified air-monitoring technician to confirm fiber concentrations are below clearance criteria before containment is removed and the area is reoccupied.
- Bulk sample collection authority
- Only a certified inspector may collect bulk samples of suspect asbestos-containing material for laboratory analysis; abatement workers may not perform inspections.
- Management plan preparation
- A certified management planner evaluates inspection data and recommends response actions such as operations and maintenance, repair, enclosure, encapsulation, or removal for asbestos-containing materials.
- Abatement project design contents
- A certified project designer specifies the scope of removal, containment and engineering controls, work practices, worker protection measures, and clearance criteria for the abatement project.
- Certification renewal process
- Renewal requires current annual refresher training for the discipline and submission of renewal materials to the NM Asbestos Control Program before the existing certificate expires.
- Training provider approval
- New Mexico accepts training from providers accredited under EPA/AHERA or otherwise approved by the state; certificates from unapproved providers do not satisfy the training prerequisite.
- Supervisor abatement plan duty
- The certified supervisor implements the written abatement plan, verifies containment and negative pressure, and stops work when conditions threaten worker safety or containment integrity.
- Worker decontamination compliance
- Certified workers must follow the decontamination sequence-equipment room, shower, clean room-and use required respiratory protection and protective clothing during abatement.
- Enforcement authority
- The NM Environment Department may suspend, revoke, or deny certification and assess penalties for violations of the asbestos rule, including uncertified work or false notifications.
- Notification amendment duty
- If project dates, scope, or the on-site supervisor change after notification is filed, the contractor must update the NM Asbestos Control Program before the affected work proceeds.
- Inspector independence
- In New Mexico, the clearance air-monitoring or inspection function should be performed independently of the abatement contractor to avoid conflicts of interest in clearance decisions.