I85PREP
⌘ K
NCM-MCI study materials
NCM-MCI study resources

NCM-MCI practice questions

One question at a time. Build your NCM-MCI understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Design and Plan a Nutanix Multicloud Infrastructure

In a Nutanix multicloud design, which component provides a single control plane for provisioning and governing clusters across on-premises and public cloud environments?

  1. NCC
  2. Prism Central Correct answer.
  3. Foundation
  4. VirtIO adapter

Explanation

Prism Central is the centralized management plane that can register multiple Prism Element clusters, including cloud-hosted ones, and give one inventory, RBAC, and policy surface. Foundation is used for imaging and cluster creation on hardware, and NCC performs health checks, so neither serves as the multicloud control plane.

Question 2Design and Plan a Nutanix Multicloud Infrastructure

A designer must keep a Nutanix cluster's data on-premises for regulatory reasons while bursting workloads to a public cloud. Which architecture best matches this requirement?

  1. An isolated edge cluster with no connection to the primary site
  2. A single stretched cluster spanning the datacenter and the cloud region
  3. A fully cloud-native redesign that migrates all data to the provider
  4. A hybrid design where the on-premises cluster retains primary data and cloud capacity runs burst workloads Correct answer.

Explanation

A hybrid design satisfies data-residency constraints by keeping authoritative data on-premises while using cloud resources for elastic compute during peaks. Stretching a cluster across a WAN to a cloud region introduces latency and failure-domain problems that violate the residency intent rather than honoring it.

Question 3Design and Plan a Nutanix Multicloud Infrastructure

Which Nutanix capability lets an administrator deploy and manage Kubernetes clusters consistently across private and public clouds?

  1. Nutanix Mine
  2. Nutanix Flow Network Security
  3. Nutanix Files
  4. Nutanix Kubernetes Platform Correct answer.

Explanation

Nutanix Kubernetes Platform delivers a consistent Kubernetes distribution and lifecycle management across on-premises and supported public clouds. Files is scale-out storage, Mine is backup integration, and Flow handles microsegmentation, so none of them manage container orchestration.

Question 4Design and Plan a Nutanix Multicloud Infrastructure

When planning network connectivity between an on-premises Nutanix cluster and a public cloud region for a multicloud design, which factor most directly determines achievable replication latency?

  1. The number of CVMs in each cluster
  2. The round-trip time of the inter-site link Correct answer.
  3. The size of the Prism Central VM
  4. The count of storage containers configured

Explanation

Replication and live-migration latency are dominated by the round-trip time and available bandwidth of the WAN path between sites. Cluster-internal quantities such as CVM count or storage container count do not change the propagation delay of the inter-site link.

Question 5Design and Plan a Nutanix Multicloud Infrastructure

A customer wants Nutanix-managed infrastructure in a public cloud while keeping the same operational tooling used on-premises. Which offering should the architect recommend?

  1. Nutanix Era
  2. Nutanix Objects
  3. Nutanix Cloud Clusters Correct answer.
  4. Nutanix Data Lens

Explanation

Nutanix Cloud Clusters runs the AHV-based Nutanix stack inside supported public clouds, so Prism Central and existing workflows extend to that environment. Era handles database lifecycle, Objects provides S3-compatible storage, and Data Lens is data-governance analytics.

Question 6Design and Plan a Nutanix Multicloud Infrastructure

Which design decision best supports a multicloud strategy that avoids dependence on a single public cloud provider?

  1. Pinning all backups to a single cloud region
  2. Using provider-specific identity systems exclusively
  3. Abstracting workloads so they can run on Nutanix infrastructure in more than one cloud Correct answer.
  4. Standardizing on one provider's proprietary orchestration API

Explanation

Portability comes from abstraction layers such as consistent virtualization and Kubernetes platforms that run on Nutanix across providers. Locking orchestration, identity, or backups to one provider increases concentration risk instead of reducing it.

Question 7Design and Plan a Nutanix Multicloud Infrastructure

What is the primary purpose of registering multiple Prism Element clusters to one Prism Central instance in a multicloud design?

  1. To replicate storage synchronously between every registered cluster
  2. To replace each cluster's local CVM with a shared cloud CVM
  3. To centralize inventory, RBAC, and policy management across environments Correct answer.
  4. To pool CPU and memory across clusters into one hypervisor domain

Explanation

Registering clusters to Prism Central unifies visibility, role-based access, and policy application without merging their compute or storage domains. Each Prism Element retains its own hypervisor and data-plane responsibilities.

Question 8Design and Plan a Nutanix Multicloud Infrastructure

An architect is sizing a multicloud design that must survive the loss of an entire public cloud region. Which requirement should be documented explicitly?

  1. The default password policy of the hypervisor
  2. The color scheme of the Prism Central dashboard
  3. The number of vCPUs per CVM in the primary cluster
  4. Recovery point and recovery time objectives for the surviving site Correct answer.

Explanation

Region-loss resilience is expressed through RPO and RTO, which drive replication frequency, capacity reservations, and failover automation. Internal CVM sizing, UI preferences, and password defaults do not define whether the design meets the availability goal.

Question 9Design and Plan a Nutanix Multicloud Infrastructure

Which Nutanix feature allows an administrator to apply consistent security policy to workloads regardless of whether they run on-premises or in a supported public cloud?

  1. Nutanix Flow Network Security Correct answer.
  2. Nutanix Calm
  3. Nutanix Volumes
  4. Nutanix Prism Element

Explanation

Flow Network Security provides distributed microsegmentation policy that can be managed centrally through Prism Central across registered environments. Volumes exposes block storage, Calm handles application automation, and Prism Element is a per-cluster UI.

Question 10Design and Plan a Nutanix Multicloud Infrastructure

A design team must choose between AHV and ESXi for a Nutanix multicloud deployment. Which consideration most strongly favors AHV in this context?

  1. AHV only supports Windows guests
  2. AHV is included with the Nutanix stack and managed natively through Prism Correct answer.
  3. AHV requires no network configuration
  4. AHV eliminates the need for Prism Central

Explanation

AHV is bundled with the Nutanix software stack and fully managed through Prism, which simplifies consistent operations across environments. It still needs proper network design, supports many guest operating systems, and works alongside rather than replacing Prism Central.

Question 11Design and Plan a Nutanix Multicloud Infrastructure

Which statement correctly describes how Nutanix Cloud Clusters differs from simply running Nutanix software on customer-owned hardware?

  1. It only supports storage-only nodes
  2. It requires no networking between the cloud and on-premises sites
  3. It replaces Prism Central with the provider's console
  4. It runs the Nutanix stack inside a public cloud provider's environment Correct answer.

Explanation

Cloud Clusters hosts the Nutanix software stack, including AHV, within a supported public cloud, giving a consistent operational model with on-premises clusters. Management still flows through Prism Central, and connectivity to on-premises is normally required for hybrid designs.

Question 12Design and Plan a Nutanix Multicloud Infrastructure

When designing storage for a multicloud environment, which Nutanix capability provides S3-compatible object storage that applications can use consistently across sites?

  1. Nutanix Objects Correct answer.
  2. Nutanix Files
  3. Nutanix Mine
  4. Nutanix Volumes

Explanation

Objects delivers scale-out, S3-compatible object storage that can be deployed on-premises and in cloud environments for consistent application access. Files serves SMB and NFS, Volumes presents block storage, and Mine integrates backup software.

Question 13Design and Plan a Nutanix Multicloud Infrastructure

An architect needs to plan identity and access for a multicloud Nutanix deployment. Which approach best supports consistent administration?

  1. Relying on the public cloud provider's console for all Nutanix access
  2. Integrating Prism Central with a central directory service and defining role-based access Correct answer.
  3. Creating separate local accounts on every Prism Element
  4. Sharing one administrator credential across all clusters

Explanation

Directory integration with Prism Central plus role-based access gives a single, auditable identity model across registered clusters and clouds. Local per-cluster accounts and shared credentials undermine consistency and accountability.

Question 14Design and Plan a Nutanix Multicloud Infrastructure

Which factor is most important when deciding whether to use synchronous or asynchronous replication between an on-premises Nutanix cluster and a cloud region?

  1. The number of virtual NICs per VM
  2. The version of the guest operating system
  3. The number of storage policies defined
  4. The latency and bandwidth of the link between sites Correct answer.

Explanation

Synchronous replication requires very low round-trip latency and adequate bandwidth, which WAN links to a cloud region often cannot guarantee, so asynchronous replication is usually chosen. Guest OS version and NIC counts do not determine replication mode feasibility.

Question 15Design and Plan a Nutanix Multicloud Infrastructure

What is the role of Nutanix Calm in a multicloud design?

  1. It performs hypervisor-level memory deduplication
  2. It provides application-centric automation and blueprints across environments Correct answer.
  3. It replaces the need for any network segmentation
  4. It stores object data in S3 buckets

Explanation

Calm delivers application blueprints and lifecycle automation so multi-tier applications can be deployed consistently to different Nutanix-managed environments. Memory deduplication, segmentation, and object storage are handled by other components.

Question 16Design and Plan a Nutanix Multicloud Infrastructure

A design must place a secondary copy of data in a public cloud for disaster recovery while keeping production on-premises. Which Nutanix capability most directly supports this?

  1. Enabling deduplication on the primary cluster
  2. Adding more virtual NICs to production VMs
  3. Increasing the CVM memory of the primary cluster
  4. Asynchronous replication of protected workloads to a Cloud Clusters environment Correct answer.

Explanation

Asynchronous replication to a Nutanix environment in the cloud creates a recoverable secondary copy without requiring low-latency synchronous links. Local efficiency or sizing changes do not create an off-site recovery copy.

Question 17Design and Plan a Nutanix Multicloud Infrastructure

Which Nutanix component would an architect use to evaluate cluster health and identify configuration risks before finalizing a multicloud design?

  1. Calm
  2. Files
  3. Objects
  4. NCC Correct answer.

Explanation

NCC runs health checks and best-practice inspections that reveal configuration and resiliency risks in a cluster. Calm, Objects, and Files are workload services and do not perform cluster diagnostics.

Question 18Design and Plan a Nutanix Multicloud Infrastructure

When planning capacity for a multicloud design, which practice best protects against a public cloud region becoming unavailable?

  1. Sizing only for average daily utilization
  2. Assuming cloud capacity is always immediately available
  3. Reserving sufficient capacity in an alternate region for critical workloads Correct answer.
  4. Depending on a single availability zone

Explanation

Failover requires that the alternate location can actually host the workloads, so capacity must be reserved or guaranteed there in advance. Assuming instant availability, sizing to averages, or using one zone leaves the design exposed during a regional event.

Question 19Design and Plan a Nutanix Multicloud Infrastructure

Which design choice best limits blast radius if one public cloud account is compromised in a multicloud Nutanix deployment?

  1. Disabling audit logging to reduce noise
  2. Storing all credentials in a shared spreadsheet
  3. Using one shared administrative account for every environment
  4. Segmenting accounts and applying least-privilege roles per environment Correct answer.

Explanation

Separate accounts with least-privilege roles confine the impact of a compromise to one environment and preserve auditability. Shared administrative credentials, disabled logging, and informal credential storage all widen exposure.

Question 20Design and Plan a Nutanix Multicloud Infrastructure

Which Nutanix feature lets an architect extend a single logical network and security model across on-premises and cloud clusters?

  1. Cloud provider security groups managed independently
  2. Per-cluster standalone firewall rules configured locally
  3. Hypervisor-level VLANs configured only on-premises
  4. Prism Central-managed Flow policies applied to registered clusters Correct answer.

Explanation

Flow policies managed through Prism Central can be applied consistently to all registered clusters, giving one security model across environments. Locally configured rules and independent provider groups fragment policy and are hard to keep aligned.

Question 21Design and Plan a Nutanix Multicloud Infrastructure

What is the primary benefit of using Nutanix Move in a multicloud migration plan?

  1. It runs health checks on hardware
  2. It migrates workloads between platforms with minimal downtime Correct answer.
  3. It performs microsegmentation enforcement
  4. It provides S3-compatible object storage

Explanation

Move orchestrates workload migration between supported source and target environments, including cloud targets, with controlled cutover. Object storage, segmentation, and hardware health checks belong to other Nutanix components.

Question 22Design and Plan a Nutanix Multicloud Infrastructure

An architect must justify a multicloud design to leadership. Which benefit is most defensible and specific to Nutanix's approach?

  1. Removal of the need for network design
  2. A consistent operational stack and tooling across on-premises and cloud environments Correct answer.
  3. Elimination of all data protection requirements
  4. Guaranteed lower cost than every public cloud provider

Explanation

The strongest defensible benefit is operational consistency: the same Nutanix software, Prism management, and services run across environments, reducing retraining and tool sprawl. Absolute cost superiority, elimination of data protection, and removal of network design are not credible claims.

Question 23Design and Plan a Nutanix Multicloud Infrastructure

Which consideration is most relevant when choosing a public cloud region for a Nutanix Cloud Clusters deployment that must serve latency-sensitive users?

  1. The proximity of the region to the user population Correct answer.
  2. The number of storage containers in the on-premises cluster
  3. The count of VMs in the on-premises cluster
  4. The version of Prism Element in use

Explanation

User-perceived latency is driven primarily by network distance between users and the region hosting their workloads, so region proximity is the deciding factor. On-premises container counts, software versions, and VM counts do not change user-to-region latency.

Question 24Design and Plan a Nutanix Multicloud Infrastructure

Which Nutanix service is designed to simplify database provisioning and lifecycle management across environments?

  1. Nutanix Flow
  2. Nutanix Era Correct answer.
  3. Nutanix Move
  4. Nutanix Volumes

Explanation

Era automates database copy, refresh, and lifecycle operations across on-premises and cloud environments. Flow handles network security, Volumes presents block storage, and Move migrates workloads.

Question 25Design and Plan a Nutanix Multicloud Infrastructure

A multicloud design requires that all clusters report to a single Prism Central instance. Which prerequisite must be verified first?

  1. That all clusters run the same guest operating system
  2. That no cluster uses encryption
  3. Network reachability and appropriate ports between each cluster and Prism Central Correct answer.
  4. That every cluster uses identical hardware models

Explanation

Each Prism Element must be able to reach Prism Central over the required ports for registration and ongoing management, so connectivity is the gating prerequisite. Hardware uniformity, guest OS uniformity, and disabling encryption are not registration requirements.

Question 26Design and Plan a Nutanix Multicloud Infrastructure

An architect is planning a multicloud design where workloads will run on Nutanix Cloud Clusters in both AWS and Azure. Which statement best describes the shared responsibility model as it applies to the Nutanix software stack in this design?

  1. The customer is responsible for securing the Nutanix software layer, including Prism Central access and guest VM patching, while the cloud provider secures the physical infrastructure. Correct answer.
  2. Nutanix is responsible for the security of the underlying cloud provider's physical infrastructure.
  3. Security responsibility is transferred entirely to Nutanix when using Nutanix Cloud Clusters.
  4. The cloud provider is responsible for patching the AOS controller VMs because they run on provider-managed hosts.

Explanation

In any public cloud deployment, the provider secures the physical facilities and hardware, but the customer remains responsible for the software layer they deploy, including the Nutanix stack and guest workloads. Nutanix does not assume operational security responsibility for the customer's Prism Central or guest VMs. This division must be documented in the multicloud design.

Question 27Design and Plan a Nutanix Multicloud Infrastructure

A design team is evaluating whether to use Nutanix Flow network security policies across an on-premises cluster and a Nutanix Cloud Clusters deployment in AWS. Which statement about Flow policy scope is most accurate for this design?

  1. Flow policies only support east-west traffic within a single AHV host and do not extend to inter-cluster traffic.
  2. Flow policies are applied per Prism Element cluster and cannot be shared across clusters.
  3. Flow policies defined in Prism Central can be applied to multiple clusters registered to that Prism Central, providing a consistent security model across environments. Correct answer.
  4. Flow policies require a separate third-party firewall appliance in each cloud region.

Explanation

Prism Central provides a centralized policy management plane, and Flow security policies created there can be applied to multiple registered clusters. This allows a consistent distributed firewall model across on-premises and cloud clusters. Per-cluster and per-host limitations would undermine the multicloud security design.

Question 28Design and Plan a Nutanix Multicloud Infrastructure

An architect must design a multicloud backup strategy that protects against the loss of an entire Nutanix Cloud Clusters region in Azure. Which design element is most critical to include?

  1. A larger capacity tier within the same Azure region.
  2. Increased local snapshot frequency on the primary cluster.
  3. Replication of backups to a separate object storage target in a different region or cloud provider. Correct answer.
  4. A second Prism Central instance in the same region for redundancy.

Explanation

To survive the loss of an entire region, backup data must be stored in a location that is independent of that region. Replicating backups to a different region or another cloud provider ensures availability if the primary region becomes unavailable. Local snapshots and same-region capacity do not protect against regional failure.

Question 29Design and Plan a Nutanix Multicloud Infrastructure

When designing a multicloud Nutanix environment that uses Prism Central for centralized management, which networking requirement must be met for Prism Central to manage clusters in a public cloud?

  1. Prism Central must be deployed in the same public cloud region as every managed cluster.
  2. Prism Central must have IP connectivity to each cluster's Prism Element virtual IP, typically over a VPN or dedicated interconnect. Correct answer.
  3. All clusters must be on the same layer-2 subnet as Prism Central.
  4. Each cluster must use the same VLAN ID for its management network.

Explanation

Prism Central communicates with registered Prism Element clusters over IP, so routable connectivity must exist between Prism Central and each cluster's Prism Element VIP. In multicloud designs this is usually provided by VPN or dedicated network interconnect. Layer-2 adjacency and matching VLANs are not required.

Question 30Design and Plan a Nutanix Multicloud Infrastructure

A multicloud design must ensure that if a public cloud region hosting a Nutanix Cloud Clusters deployment becomes unavailable, critical VMs can be restarted on-premises. Which Nutanix capability should the architect plan to use?

  1. Nutanix Leap for orchestrated disaster recovery failover between the cloud cluster and the on-premises cluster. Correct answer.
  2. Nutanix Era for database cloning across sites.
  3. Nutanix Files for shared file storage across sites.
  4. Nutanix Flow for microsegmentation between sites.

Explanation

Nutanix Leap provides disaster recovery orchestration, including automated failover and runbook execution between protected sites. In a multicloud design, Leap can orchestrate recovery from a cloud cluster to an on-premises cluster. Flow, Files, and Era address security, file storage, and database lifecycle respectively, not VM failover orchestration.

Question 31Design and Plan a Nutanix Multicloud Infrastructure

An architect is designing a multicloud environment where a single Prism Central instance will manage clusters in two different public clouds. Which statement about Prism Central deployment is correct?

  1. Prism Central cannot manage clusters that are in different public clouds.
  2. Prism Central must run on dedicated hardware outside any Nutanix cluster.
  3. Prism Central can be deployed as a scale-out cluster of multiple VMs to support larger environments and provide redundancy. Correct answer.
  4. Prism Central must be deployed as a single VM and cannot be scaled.

Explanation

Prism Central supports scale-out deployment, where multiple Prism Central VMs form a cluster to increase capacity and resilience. This is important for large multicloud environments with many managed clusters. It can be hosted on a Nutanix cluster and can manage clusters across clouds.

Question 32Design and Plan a Nutanix Multicloud Infrastructure

A design must ensure that object data stored via Nutanix Objects in a multicloud deployment remains available if a single site fails. Which configuration should the architect specify?

  1. Objects deployed across multiple sites with replication configured between them. Correct answer.
  2. Objects with erasure coding enabled on a single site.
  3. A single Objects instance with replication factor 2 within one site.
  4. Objects with a local snapshot schedule only.

Explanation

Nutanix Objects can be deployed across multiple sites with replication to provide site-level resilience. A single-site deployment, even with replication factor or erasure coding, cannot survive the loss of that site. Snapshots alone do not provide automatic availability of object data at another site.

Question 33Design and Plan a Nutanix Multicloud Infrastructure

When planning a multicloud design with Nutanix Cloud Clusters in AWS, which factor most directly affects the choice of instance type for the Nutanix nodes?

  1. The number of Prism Central instances required.
  2. The version of AOS running on the on-premises cluster.
  3. The required CPU, memory, and storage capacity per node to support the projected workload and replication factor. Correct answer.
  4. The number of VLANs configured in the on-premises network.

Explanation

Instance type selection in a public cloud is driven by the compute, memory, and storage resources needed per node to meet workload demand and resiliency requirements. Replication factor affects usable capacity and therefore node sizing. Prism Central count, AOS version, and VLAN count do not directly determine instance type.

Question 34Design and Plan a Nutanix Multicloud Infrastructure

An architect is designing identity management for a multicloud Nutanix environment that includes Prism Central and Nutanix Cloud Clusters. Which approach best supports centralized authentication and role-based access?

  1. Integration with an external directory service such as Active Directory or LDAP for authentication and role mapping. Correct answer.
  2. SAML authentication only for the on-premises cluster.
  3. Local user accounts on each Prism Element cluster.
  4. Shared administrator credentials stored in a password vault.

Explanation

Integrating Prism Central with an external directory service allows centralized authentication and consistent role-based access control across managed clusters. Local accounts and shared credentials do not scale and weaken auditability. SAML limited to one cluster does not provide consistent multicloud identity.

Question 35Design and Plan a Nutanix Multicloud Infrastructure

A multicloud design requires that a Nutanix cluster in Azure be able to communicate with an on-premises Prism Central over a private connection. Which design element is most appropriate?

  1. Expose Prism Central on the public internet with a strong password.
  2. Use Azure ExpressRoute or a site-to-site VPN to provide private IP connectivity between the Azure cluster and on-premises Prism Central. Correct answer.
  3. Use NAT to translate the Prism Central IP to a public address.
  4. Deploy a second Prism Central in Azure and manage the cluster locally only.

Explanation

Private connectivity between Azure and on-premises is typically provided by ExpressRoute or a site-to-site VPN, which allows the Azure cluster to reach Prism Central without exposing management traffic to the internet. Public exposure of Prism Central increases risk. A local-only Prism Central would not meet the centralized management requirement.

Question 36Design and Plan a Nutanix Multicloud Infrastructure

An architect is evaluating Nutanix Calm for a multicloud design that must deploy a three-tier application consistently in on-premises and public cloud environments. Which Calm capability is most relevant?

  1. Storage tiering based on access frequency.
  2. Real-time network traffic visualization for security auditing.
  3. Blueprints that define application topology and deployment settings for multiple environments. Correct answer.
  4. Automated database patching across clusters.

Explanation

Nutanix Calm uses blueprints to model applications and their dependencies, and these blueprints can be deployed to different environments including on-premises and public clouds. This supports consistent application deployment across multicloud targets. Traffic visualization, database patching, and storage tiering are not Calm's primary functions.

Question 37Design and Plan a Nutanix Multicloud Infrastructure

A design team must choose a replication strategy between an on-premises Nutanix cluster and a Nutanix Cloud Clusters deployment in AWS for a workload with a recovery point objective of 15 minutes. Which approach is most appropriate?

  1. Asynchronous replication with a schedule that meets the 15-minute RPO. Correct answer.
  2. No replication; rely on local snapshots only.
  3. Synchronous replication over the internet without dedicated bandwidth.
  4. Synchronous replication, because it guarantees zero data loss.

Explanation

A 15-minute RPO allows asynchronous replication scheduled at intervals of 15 minutes or less. Synchronous replication typically requires low-latency connectivity and is not necessary to meet this RPO. Local snapshots alone do not protect against site loss, and synchronous replication over the internet without guaranteed bandwidth is not a sound design.

Question 38Design and Plan a Nutanix Multicloud Infrastructure

When designing a multicloud Nutanix environment, which consideration is most important when selecting a public cloud region for a Nutanix Cloud Clusters deployment that must meet data residency requirements?

  1. A region located within the required legal jurisdiction and offering the necessary compliance certifications. Correct answer.
  2. The region closest to the administrator's time zone.
  3. The region with the lowest cost per instance.
  4. The region with the most available instance types.

Explanation

Data residency requirements dictate that data must remain within a specific legal jurisdiction, so the region must be selected accordingly. Compliance certifications may also be required for regulated data. Cost, instance variety, and time zone are secondary to legal and regulatory constraints.

Question 39Design and Plan a Nutanix Multicloud Infrastructure

An architect is designing a multicloud environment where Nutanix Clusters in AWS must access on-premises data through a VPN. Which statement about VPN capacity planning is most accurate?

  1. VPN capacity is determined solely by the number of VLANs configured.
  2. VPN throughput is limited by the VPN gateway capacity and encryption overhead, so the design must account for expected replication and application traffic. Correct answer.
  3. VPN throughput is unlimited and does not require planning.
  4. VPNs are only suitable for management traffic and cannot carry replication traffic.

Explanation

VPN gateways have finite throughput, and IPsec encryption adds overhead that reduces usable bandwidth. The design must size the VPN to accommodate replication and application traffic to avoid bottlenecks. VPNs can carry replication traffic if capacity is planned, and VLAN count does not determine capacity.

Question 40Design and Plan a Nutanix Multicloud Infrastructure

A multicloud design must ensure that Nutanix AOS clusters in different public clouds can be centrally monitored for capacity and performance. Which Prism Central capability supports this requirement?

  1. Prism Central's local snapshot scheduling.
  2. Prism Central's role as a DNS forwarder.
  3. Prism Central's ability to register and manage multiple Prism Element clusters across clouds. Correct answer.
  4. Prism Central's built-in VPN server.

Explanation

Prism Central can register and manage multiple Prism Element clusters, including those in different public clouds, providing a single pane for monitoring capacity and performance. Snapshot scheduling, VPN services, and DNS forwarding are not the capabilities that provide centralized multicloud monitoring.

Question 41Deploy and Configure Nutanix Clusters and Prism Central

During Foundation, which configuration item determines the initial CVM IP address assigned to each node?

  1. The CVM IP entered for each node Correct answer.
  2. The Prism Central IP entered during imaging
  3. The default gateway of the backplane network
  4. The cluster virtual IP entered on the first node

Explanation

Foundation collects separate per-node CVM and hypervisor IP addresses. The CVM IP field determines the initial address assigned to that node's Controller VM; the hypervisor IP configures the host. Prism Central, gateways, and the cluster virtual IP do not supply individual CVM addresses.

Question 42Deploy and Configure Nutanix Clusters and Prism Central

An administrator wants a newly imaged node to boot the installer over the network without manually selecting a boot device. Which setting must be enabled in the node's BIOS/UEFI?

  1. Secure Boot with custom keys
  2. SR-IOV global enable
  3. PXE or network boot in the boot order Correct answer.
  4. TPM 2.0 measurement

Explanation

Foundation relies on network boot so the node loads the imaging environment automatically. Placing network/PXE boot ahead of local disks in the boot order lets the installer run unattended instead of requiring manual intervention at the console.

Question 43Deploy and Configure Nutanix Clusters and Prism Central

Which statement describes the role of the cluster virtual IP (VIP) created during Nutanix cluster initialization?

  1. It is the address each CVM uses for backplane replication traffic.
  2. It is the address assigned to the AHV host bridge for VM egress.
  3. It is a floating address that Prism Element and API clients use to reach any available CVM. Correct answer.
  4. It is the iSCSI data services address presented to external hosts.

Explanation

The cluster VIP is a single virtual address owned by whichever CVM is currently serving requests, giving Prism Element and API clients a stable endpoint. Individual CVM IPs still exist for node-specific traffic, but clients should target the VIP.

Question 44Deploy and Configure Nutanix Clusters and Prism Central

A cluster is being created with AHV. Which network must be configured so that CVMs can communicate with each other for replication and metadata traffic?

  1. The VM guest network
  2. The backplane (internal) network Correct answer.
  3. The IPMI/BMC network
  4. The Prism Central network

Explanation

The backplane network carries CVM-to-CVM replication and cluster metadata traffic and must be consistently configured across nodes. Guest, management, and out-of-band networks serve different purposes and cannot substitute for it.

Question 45Deploy and Configure Nutanix Clusters and Prism Central

Which Prism Central deployment size should be selected when planning for a large environment with many registered clusters and a high VM count?

  1. Small
  2. Large Correct answer.
  3. Extra-small
  4. The default size regardless of scale

Explanation

Prism Central is deployed in predefined sizes, and the larger size provides more vCPU and memory to support bigger inventories and more registered clusters. Choosing an undersized deployment limits scalability and can require redeployment later.

Question 46Deploy and Configure Nutanix Clusters and Prism Central

Which component must exist before a Prism Central instance can be deployed from Prism Element?

  1. A Nutanix cluster running a supported AOS version Correct answer.
  2. An external DNS forwarder owned by Nutanix
  3. A configured Files share
  4. A registered Objects store

Explanation

Prism Central is deployed as a VM onto an existing Nutanix cluster, so a healthy cluster at a supported AOS release is a prerequisite. Optional services such as Objects or Files are not required for the deployment itself.

Question 47Deploy and Configure Nutanix Clusters and Prism Central

Which file format is used to supply the configuration values when deploying Prism Central through the deploy wizard?

  1. A YAML manifest signed by the CA
  2. A CSV inventory of nodes
  3. An XML cluster definition
  4. A JSON configuration file generated by the wizard Correct answer.

Explanation

The Prism Central deployment workflow produces a JSON configuration file that captures the chosen size, network settings, and credentials. That file is then used to drive the automated deployment of the Prism Central VM.

Question 48Deploy and Configure Nutanix Clusters and Prism Central

After a cluster is created, what is required to make its data visible in Prism Central for centralized management?

  1. Convert the cluster to a single-node deployment
  2. Register the cluster with Prism Central from Prism Element Correct answer.
  3. Re-run Foundation on each node
  4. Enable deduplication on all containers

Explanation

Clusters must be registered to Prism Central before they appear in its inventory and can be managed centrally. Registration establishes the trust relationship and is initiated from the cluster side.

Question 49Deploy and Configure Nutanix Clusters and Prism Central

An administrator needs to change the CVM memory allocated on a running cluster to support additional services. Which action is appropriate?

  1. Power off all CVMs simultaneously and adjust each in the hypervisor
  2. Use the cluster's CVM resizing workflow and allow a rolling restart Correct answer.
  3. Increase only the Prism Central VM memory instead
  4. Edit the CVM memory in the VM settings directly from Prism Element

Explanation

CVM resources are adjusted through a supported workflow that changes one CVM at a time and performs rolling restarts to preserve cluster availability. Manually editing or powering off all CVMs risks an outage and is unsupported.

Question 50Deploy and Configure Nutanix Clusters and Prism Central

During cluster creation the administrator receives an error that the nodes cannot reach each other on the backplane. Which troubleshooting step is most appropriate first?

  1. Change the cluster VIP to a public address
  2. Reimage all nodes and start over
  3. Disable Prism Central registration
  4. Verify that each CVM's backplane interface is on the same untagged VLAN/subnet and that switch ports allow the traffic Correct answer.

Explanation

Backplane connectivity failures usually stem from mismatched VLAN/subnet configuration or switch ports blocking the required traffic. Confirming consistent Layer 2 reachability across all CVM backplane interfaces isolates the cause before any disruptive action.