NV Asbestos Abatement study plan

Map the A-23 removal scope: list the sequence of abatement activities from containment setup through clearance, and label which step each NAC 624 asbestos provision governs

Define the key removal terms (regulated asbestos-containing material, friable vs. non-friable, abatement, containment, negative air, glovebag, wetting, HEPA filtration) in your own words on flashcards

Distinguish Category I and Category II non-friable material and state when each becomes regulated

Read NRS 624.010-624.100 and write a one-line summary of each definition and its practical effect on an abatement job

Describe containment construction for a full enclosure and a small-scale short-duration job, and explain the difference in engineering controls

Explain negative air pressure setup, air changes per hour, and HEPA exhaust placement, and calculate the number of units needed for a stated room volume

Outline worker protection steps: respiratory protection selection, decontamination shower and change room flow, and waste bagging and labeling

Sequence clearance air monitoring: state when sampling occurs, what aggressive sampling means, and what result permits reoccupancy

Compare removal methods (glovebag, wrap-and-cut, mini-enclosure, full containment) and justify a method choice for three different material scenarios

Identify the notification and recordkeeping duties that attach before, during, and after removal, and note the deadline for each

Explain how a compliance inspector would evaluate a site, and list the five most common deficiencies you would expect to find

Practice reading a scenario and spotting the first violation in the described sequence

Trace the Nevada contractor licensing application from initial inquiry to license issuance, listing every document and fee at each stage

Explain the role of the classification system and state exactly what the A-23 classification authorizes and what it excludes

Describe the qualifier requirement, including experience verification and the qualifier's ongoing duties

Summarize the disciplinary grounds and the complaint-to-hearing process under NRS 624

Build a citation index of the NRS 624 sections most tested on: licensing, unlicensed contracting, advertising, bid limits, and disciplinary action

Translate each major NAC 624 requirement into a plain-English compliance action a job-site supervisor would perform

Explain the consequences of contracting without a license, including contract enforceability and civil exposure

Distinguish the roles of the Board, the executive officer, and the hearing process in enforcement

Explain the financial responsibility requirements, including the minimum net worth or working capital thresholds and how they are documented

Describe each type of surety bond and license bond a Nevada contractor may be required to carry, and the purpose of each

Outline the recovery fund: who may claim, what it covers, the cap, and the process

List the recordkeeping, trust-fund handling, and prompt-payment obligations that create financial liability

Integrate the domains by writing a project scenario where a contractor bids, licenses, performs, and closes out an asbestos abatement job

Identify the three points in that scenario where licensing, removal, and financial duties intersect

Rehearse explaining the A-23 scope boundary to a client who asks for work outside it

Review missed items from weeks 1-6 and correct your notes

Take two full-length timed practice exams under test conditions and score each domain separately

For every missed question, write the correct rule and the reason your answer was wrong

Drill the 30 highest-risk facts (fees, deadlines, thresholds, caps, notification periods) until recall is automatic

Build a final one-page summary sheet you could review in the hour before the exam